Home

  • Banner

  • Out-of-Stock
INA238 DC Current, Voltage and Power Monitor I2C Module – STEMMA QT / Qwiic Compatible Robotics Bangladesh
  • INA238 DC Current, Voltage and Power Monitor I2C Module – STEMMA QT / Qwiic Compatible Robotics Bangladesh

INA238 DC Current, Voltage and Power Monitor I2C Module – STEMMA QT / Qwiic Compatible

RBD-4090

The INA238 is a high-precision DC power monitoring module designed to measure current, bus voltage, and calculated power on the high side of a circuit. Featuring a 20-bit delta-sigma ADC, it supports accurate energy and charge accumulation, making it suitable for power analysis in battery systems, servers, and industrial equipment.

BDT 1,290
BDT 1,290 BDT 1,290 BDT 1,290 BDT 1,290
Tax excluded Tax includedTax excludedTax includedTax excluded
BDT 1,290 Tax excluded
BDT 1,290 Tax included
BDT 0 Tax
BDT 1,290 Tax excluded
BDT 0 Tax
BDT 1,290 Tax included
Quantity
Out-of-Stock

1 person has purchased this item
There are not enough products in stock
Description

Short Description

The INA238 is a high-precision DC power monitoring module designed to measure current, bus voltage, and calculated power on the high side of a circuit. Featuring a 20-bit delta-sigma ADC, it supports accurate energy and charge accumulation, making it suitable for power analysis in battery systems, servers, and industrial equipment.

Key Features

  • High-side current, voltage, and power measurement

  • 20-bit delta-sigma ADC for high resolution

  • Energy and charge accumulation support

  • Wide bus voltage measurement range

  • I2C communication interface

  • STEMMA QT / Qwiic connector available and compatible

Technical Specifications

  • IC Model: INA238

  • Measurement Type: DC current, voltage, power, energy, charge

  • Measurement Method: High-side sensing

  • Current Measurement Range: ±20 A (maximum, dependent on shunt resistor)

  • Bus Voltage Range: 0 to 85 V

  • ADC Resolution: 20-bit

  • Current Accuracy: ±0.25 percent (maximum, gain error)

  • Power Supply Voltage: 2.7V to 5.5V

  • Communication Interface: I2C

  • I2C Address: Configurable

  • Logic Level Compatibility: 3.3V or 5V

  • Module Interface: STEMMA QT / Qwiic JST-SH connector

  • Country of Origin: Made in China

Applications / Use Cases

  • Battery management systems (BMS)

  • Server and data center power monitoring

  • Solar and renewable energy systems

  • Industrial power consumption analysis

  • Embedded power measurement projects

Package Includes

  • 1 x INA238 DC power monitor module (STEMMA QT / Qwiic)

Notes / Warnings

  • QT cable not included

  • External shunt resistor selection affects current range and accuracy

  • Designed for DC measurements only

  • Ensure correct wiring and voltage limits before operation

The INA238 power monitoring module provides precise measurement of current, voltage, and power with energy accumulation capabilities. With STEMMA QT / Qwiic compatibility and a wide voltage range, it is well suited for advanced power monitoring applications in embedded and industrial systems.

Product Details
RBD-4090

Specific References

EAN13
4090
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:
AC 0~5A Analog Current Meter Module Ammeter Sensor Board for Arduino Robotics Bangladesh AC 0~5A Analog Current Meter Module Ammeter Sensor Board for Arduino Robotics Bangladesh

Reference: RBD-0564

AC 0~5A Analog Current Meter Module Ammeter Sensor Board for Arduino

(0)
Onboard precision microcurrent transformer. Onboard sampling resistor. The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA. Rated input current: 5A Rated output current: 5mA Change: 1000: 1 The linear range: 0 ~ 10A (100 ohms) Linearity: 0.2%
BDT 455
BDT 455 tax incl.
BDT 455 tax excl.
BDT 455 tax excl.
BDT 455 tax incl.
BDT 455 tax incl.
BDT 0 Tax
BDT 455 tax excl.
BDT 455 tax excl.
BDT 0 Tax
BDT 455 tax incl.
More AC 0~5A Analog Current Meter Module Ammeter Sensor Board for Arduino
In-Stock
In stock: 14
INA226 Voltage Current Power Monitoring Module Robotics Bangladesh INA226 Voltage Current Power Monitoring Module Robotics Bangladesh

Reference: RBD-3278

INA226 Voltage Current Power Monitoring Module

(0)
High-precision voltage, current, and power monitoring module using INA226 sensor. 16-bit ADC resolution ensures accurate and stable real-time measurements. Supports I²C communication with Arduino, Raspberry Pi, ESP32, and STM32. Measures both high-side and low-side currents for flexible circuit integration. Wide input voltage range up to 36V with...
BDT 350
BDT 350 tax incl.
BDT 350 tax excl.
BDT 350 tax excl.
BDT 350 tax incl.
BDT 350 tax incl.
BDT 0 Tax
BDT 350 tax excl.
BDT 350 tax excl.
BDT 0 Tax
BDT 350 tax incl.
More INA226 Voltage Current Power Monitoring Module
In-Stock
In stock: 5
Non-invasive AC current Sensor Split Core Current Transformer SCT-013-000 100A Robotics Bangladesh Non-invasive AC current Sensor Split Core Current Transformer SCT-013-000 100A Robotics Bangladesh

Reference: RBD-1173

Non-invasive AC current Sensor Split Core Current Transformer SCT-013-000 100A

(0)
Input Current : 100A Frequency: 50HZ-150KHZ Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W) Output Plug 3.5mm Dielectric Strength 6000V AC/1min Meet UL94-V0 flame retardant properties
BDT 775
BDT 775 tax incl.
BDT 775 tax excl.
BDT 775 tax excl.
BDT 775 tax incl.
BDT 775 tax incl.
BDT 0 Tax
BDT 775 tax excl.
BDT 775 tax excl.
BDT 0 Tax
BDT 775 tax incl.
More Non-invasive AC current Sensor Split Core Current Transformer SCT-013-000 100A
In-Stock
In stock: 4
Non-invasive AC current Sensor Split Core Current Transformer SCT-013-000 30A Robotics Bangladesh Non-invasive AC current Sensor Split Core Current Transformer SCT-013-000 30A Robotics Bangladesh

Reference: RBD-1836

Non-invasive AC current Sensor Split Core Current Transformer SCT-013-000 30A

(0)
Input Current : 0-30A Output Mode: 0-1V @ 30mA Frequency: 50HZ-150KHZ Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W) Output Plug 3.5mm Dielectric Strength 6000V AC/1min Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection Meet UL94-V0 flame retardant properties
BDT 780
BDT 780 tax incl.
BDT 780 tax excl.
BDT 780 tax excl.
BDT 780 tax incl.
BDT 780 tax incl.
BDT 0 Tax
BDT 780 tax excl.
BDT 780 tax excl.
BDT 0 Tax
BDT 780 tax incl.
More Non-invasive AC current Sensor Split Core Current Transformer SCT-013-000 30A
In-Stock
In stock: 21
INA219 DC Current Measurement Module Robotics Bangladesh

Reference: RBD-2735

INA219 DC Current Measurement Module

(0)
INA219 DC current and voltage measurement module with I2C interface Measures high-side current up to 3.2A with 0.8mA resolution Supports load voltages from 0–26VDC Powered by 3–5V, compatible with both 3.3V and 5V logic MCUs Integrated 0.1Ω shunt resistor ensures accurate measurements Adjustable I2C address for multiple modules on the same bus
BDT 219
BDT 219 tax incl.
BDT 219 tax excl.
BDT 219 tax excl.
BDT 219 tax incl.
BDT 219 tax incl.
BDT 0 Tax
BDT 219 tax excl.
BDT 219 tax excl.
BDT 0 Tax
BDT 219 tax incl.
More INA219 DC Current Measurement Module
In-Stock
In stock: 56
Current Sensor ACS712-20A Robotics Bangladesh

Reference: RBD-1175

Current Sensor ACS712-20A

(0)
Low-noise analog signal path Device bandwidth is set via the new FILTER pin 5 µs output rise time in response to step input current Small footprint, low-profile SOIC8 package 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8 Supply Voltage: 4.5V~5.5V DC Measure Current Range: 20A Sensitivity: 100mV/A
BDT 199
BDT 199 tax incl.
BDT 199 tax excl.
BDT 199 tax excl.
BDT 199 tax incl.
BDT 199 tax incl.
BDT 0 Tax
BDT 199 tax excl.
BDT 199 tax excl.
BDT 0 Tax
BDT 199 tax incl.
More Current Sensor ACS712-20A
In-Stock
In stock: 58
WCS1700 Hall Current Sensor Module Robotics Bangladesh

Reference: RBD-3452

WCS1700 Hall Current Sensor Module

(0)
WCS1700 Hall Current Sensor Module for AC and DC current measurement Wide detection range from 0A to 70A Linear analog output with 33mV/A sensitivity High isolation voltage up to 4000V RMS Operates with 3V–5V supply (5V recommended) Ideal for power monitoring, motor control, and battery systems
BDT 820
BDT 820 tax incl.
BDT 820 tax excl.
BDT 820 tax excl.
BDT 820 tax incl.
BDT 820 tax incl.
BDT 0 Tax
BDT 820 tax excl.
BDT 820 tax excl.
BDT 0 Tax
BDT 820 tax incl.
More WCS1700 Hall Current Sensor Module
In-Stock
In stock: 16
I2C SMBUS INA3221 Triple-Channel Shunt Current Power Supply Voltage Monitor Sensor Board Robotics Bangladesh I2C SMBUS INA3221 Triple-Channel Shunt Current Power Supply Voltage Monitor Sensor Board Robotics Bangladesh

Reference: RBD-2342

I2C SMBUS INA3221 Triple-Channel Shunt Current Power Supply Voltage Monitor Sensor Board

(0)
INA3221 Triple-Channel Shunt Current and Voltage Monitor Sensor Board Measures high-side current and bus voltage with I2C and SMBUS compatibility Monitors bus voltages (0V to 26V) and shunt voltage drops with high accuracy Programmable alerts, averaging modes, and conversion times for enhanced control Compact design with four programmable I2C addresses...
BDT 350
BDT 350 tax incl.
BDT 350 tax excl.
BDT 350 tax excl.
BDT 350 tax incl.
BDT 350 tax incl.
BDT 0 Tax
BDT 350 tax excl.
BDT 350 tax excl.
BDT 0 Tax
BDT 350 tax incl.
More I2C SMBUS INA3221 Triple-Channel Shunt Current Power Supply Voltage Monitor Sensor Board
In-Stock
In stock: 24
A3144 Hall Effect Sensor Module Robotics Bangladesh A3144 Hall Effect Sensor Module Robotics Bangladesh

Reference: RBD-2073

A3144 Hall Effect Sensor Module

(0)
Digital Output Hall-effect sensor. Operating voltage: typically 5V. Output Current: 25mA. It can be used to detect both the poles of a magnet.
BDT 60
BDT 60 tax incl.
BDT 60 tax excl.
BDT 60 tax excl.
BDT 60 tax incl.
BDT 60 tax incl.
BDT 0 Tax
BDT 60 tax excl.
BDT 60 tax excl.
BDT 0 Tax
BDT 60 tax incl.
More A3144 Hall Effect Sensor Module
In-Stock
In stock: 68
Voltage Detection Sensor Module 25V Robotics Bangladesh

Reference: RBD-2675

Voltage Detection Sensor Module 25V

(0)
Voltage detection sensor module for measuring up to 25V DC using Arduino or microcontrollers Based on resistive voltage divider principle with secure screw terminal connections Expands Arduino’s 0–5V analog input range to 0–25V for accurate voltage monitoring High resolution of 0.00489V per step with 10-bit ADC support for precise readings Compatible with...
BDT 75
BDT 75 tax incl.
BDT 75 tax excl.
BDT 75 tax excl.
BDT 75 tax incl.
BDT 75 tax incl.
BDT 0 Tax
BDT 75 tax excl.
BDT 75 tax excl.
BDT 0 Tax
BDT 75 tax incl.
More Voltage Detection Sensor Module 25V
In-Stock
In stock: 50
Out-of-Stock INA219 Current, Voltage and Power Sensor Module – STEMMA QT / Qwiic Compatible Robotics Bangladesh INA219 Current, Voltage and Power Sensor Module – STEMMA QT / Qwiic Compatible Robotics Bangladesh

Reference: RBD-4094

INA219 Current, Voltage and Power Sensor Module – STEMMA QT / Qwiic Compatible

(0)
The INA219 is a digital current, voltage, and power monitoring module based on the TI INA219 chip. It uses an I2C interface to measure DC current and bus voltage while calculating power in real time. This module is suitable for power management, battery monitoring, and smart hardware projects, with easy plug-and-play connectivity via STEMMA QT / Qwiic.
BDT 1,050
BDT 1,050 tax incl.
BDT 1,050 tax excl.
BDT 1,050 tax excl.
BDT 1,050 tax incl.
BDT 1,050 tax incl.
BDT 0 Tax
BDT 1,050 tax excl.
BDT 1,050 tax excl.
BDT 0 Tax
BDT 1,050 tax incl.
More INA219 Current, Voltage and Power Sensor Module – STEMMA QT / Qwiic Compatible
Out-of-Stock
In stock: 0
INA237 16-Bit Current, Voltage and Power Monitor Module 85V – STEMMA QT / Qwiic Compatible Robotics Bangladesh INA237 16-Bit Current, Voltage and Power Monitor Module 85V – STEMMA QT / Qwiic Compatible Robotics Bangladesh

Reference: RBD-4098

INA237 16-Bit Current, Voltage and Power Monitor Module 85V – STEMMA QT / Qwiic Compatible

(0)
The INA237 is a high-precision DC current, voltage, and power monitoring module designed for high-side measurement applications. It uses a 16-bit delta-sigma ADC to provide accurate electrical measurements and supports energy and charge accumulation. With an I2C interface and STEMMA QT / Qwiic connectivity, it is suitable for power monitoring in embedded,...
BDT 1,120
BDT 1,120 tax incl.
BDT 1,120 tax excl.
BDT 1,120 tax excl.
BDT 1,120 tax incl.
BDT 1,120 tax incl.
BDT 0 Tax
BDT 1,120 tax excl.
BDT 1,120 tax excl.
BDT 0 Tax
BDT 1,120 tax incl.
More INA237 16-Bit Current, Voltage and Power Monitor Module 85V – STEMMA QT / Qwiic Compatible
Last items in stock
In stock: 1
Gravity: Analog AC Current Sensor (20A) Robotics Bangladesh

Reference: RBD-1972

Brand: DFRobot

Gravity: Analog AC Current Sensor (20A)

(0)
Brand Gravity Analog AC Current Sensor 20A AC Current Signal Conversion Module Open Type AC Transformer Probe Included Non-contact Measurement
BDT 3,550
BDT 3,550 tax incl.
BDT 3,550 tax excl.
BDT 3,550 tax excl.
BDT 3,550 tax incl.
BDT 3,550 tax incl.
BDT 0 Tax
BDT 3,550 tax excl.
BDT 3,550 tax excl.
BDT 0 Tax
BDT 3,550 tax incl.
More Gravity: Analog AC Current Sensor (20A)
In-Stock
In stock: 5
0.28" LED Digital Voltmeter Ammeter with 100V/10A Measurement With 100A Shunt Robotics Bangladesh

Reference: RBD-2677

0.28" LED Digital Voltmeter Ammeter with 100V/10A Measurement With 100A Shunt

(0)
Compact 0.28" dual LED display for simultaneous voltage and current readings Measures DC voltage from 0–100V and current from 1–100A with included 100A shunt Operates on 5V DC supply with low current consumption (<60mA) Bright, easy-to-read digits even in low light environments Dual wiring harness for simple installation and accurate measurement...
BDT 750
BDT 750 tax incl.
BDT 750 tax excl.
BDT 750 tax excl.
BDT 750 tax incl.
BDT 750 tax incl.
BDT 0 Tax
BDT 750 tax excl.
BDT 750 tax excl.
BDT 0 Tax
BDT 750 tax incl.
More 0.28" LED Digital Voltmeter Ammeter with 100V/10A Measurement With 100A Shunt
In-Stock
In stock: 9
On sale! Current Sensor ACS712-30A Robotics Bangladesh Current Sensor ACS712-30A Robotics Bangladesh

Reference: RBD-0555

Current Sensor ACS712-30A

(0)
Low-noise analog signal path Device bandwidth is set via the new FILTER pin 5 µs output rise time in response to step input current Small footprint, low-profile SOIC8 package 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8 Supply Voltage: 4.5V~5.5V DC Measure Current Range: 30A Sensitivity: 100mV/A
BDT 149
BDT 149 tax incl.
BDT 149 tax excl.
BDT 149 tax excl.
BDT 149 tax incl.
BDT 149 tax incl.
BDT 0 Tax
BDT 149 tax excl.
BDT 149 tax excl.
BDT 0 Tax
BDT 149 tax incl.
More Current Sensor ACS712-30A
In-Stock
In stock: 43
HW670 5A Current Sensor Robotics Bangladesh HW670 5A Current Sensor Robotics Bangladesh

Reference: RBD-2120

HW670 5A Current Sensor

(0)
Onboard precision microcurrent transformer. Onboard sampling resistor. The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA.
BDT 200
BDT 200 tax incl.
BDT 200 tax excl.
BDT 200 tax excl.
BDT 200 tax incl.
BDT 200 tax incl.
BDT 0 Tax
BDT 200 tax excl.
BDT 200 tax excl.
BDT 0 Tax
BDT 200 tax incl.
More HW670 5A Current Sensor
In-Stock
In stock: 42
STEMMA QT / Qwiic JST-SH 4-Pin to Male Header Cable Robotics Bangladesh

Reference: RBD-4070

STEMMA QT / Qwiic JST-SH 4-Pin to Male Header Cable

(0)
This 4-wire cable allows easy connection between STEMMA QT or Qwiic boards and standard 0.1 inch male header interfaces. It is designed for quick prototyping with solderless breadboards or development boards. NoteCable color and connector color are supplied randomly and may vary between batches. Always verify and identify the wire color order and pin...
BDT 180
BDT 180 tax incl.
BDT 180 tax excl.
BDT 180 tax excl.
BDT 180 tax incl.
BDT 180 tax incl.
BDT 0 Tax
BDT 180 tax excl.
BDT 180 tax excl.
BDT 0 Tax
BDT 180 tax incl.
More STEMMA QT / Qwiic JST-SH 4-Pin to Male Header Cable
In stock
In stock: 21
STEMMA QT / Qwiic JST-SH 4-Pin Cable – 200mm Robotics Bangladesh

Reference: RBD-4072

STEMMA QT / Qwiic JST-SH 4-Pin Cable – 200mm

(0)
This is a 4-wire interconnect cable designed for linking STEMMA QT or Qwiic-compatible boards. It features JST-SH 4-pin female connectors on both ends, allowing quick and reliable connections between sensors, drivers, and controller boards without soldering. NoteCable color and connector color are supplied randomly and may vary between batches. Always...
BDT 180
BDT 180 tax incl.
BDT 180 tax excl.
BDT 180 tax excl.
BDT 180 tax incl.
BDT 180 tax incl.
BDT 0 Tax
BDT 180 tax excl.
BDT 180 tax excl.
BDT 0 Tax
BDT 180 tax incl.
More STEMMA QT / Qwiic JST-SH 4-Pin Cable – 200mm
In stock
In stock: 20
Out-of-Stock INA219 Current, Voltage and Power Sensor Module – STEMMA QT / Qwiic Compatible Robotics Bangladesh INA219 Current, Voltage and Power Sensor Module – STEMMA QT / Qwiic Compatible Robotics Bangladesh

Reference: RBD-4094

INA219 Current, Voltage and Power Sensor Module – STEMMA QT / Qwiic Compatible

(0)
The INA219 is a digital current, voltage, and power monitoring module based on the TI INA219 chip. It uses an I2C interface to measure DC current and bus voltage while calculating power in real time. This module is suitable for power management, battery monitoring, and smart hardware projects, with easy plug-and-play connectivity via STEMMA QT / Qwiic.
BDT 1,050
BDT 1,050 tax incl.
BDT 1,050 tax excl.
BDT 1,050 tax excl.
BDT 1,050 tax incl.
BDT 1,050 tax incl.
BDT 0 Tax
BDT 1,050 tax excl.
BDT 1,050 tax excl.
BDT 0 Tax
BDT 1,050 tax incl.
More INA219 Current, Voltage and Power Sensor Module – STEMMA QT / Qwiic Compatible
Out-of-Stock
In stock: 0

Follow us on Facebook

Facebook