• Banner

  • On sale!
GPRS GSM SIM900 Arduino Shield Robotics Bangladesh
  • GPRS GSM SIM900 Arduino Shield Robotics Bangladesh
  • GPRS GSM SIM900 Arduino Shield Robotics Bangladesh
  • GPRS GSM SIM900 Arduino Shield Robotics Bangladesh
  • GPRS GSM SIM900 Arduino Shield Robotics Bangladesh

GPRS GSM SIM900 Arduino Shield

RBD-0443

  • Based on SIMCom‘s SIM900 Module
  • Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world.
  • Control by AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands.
  • Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
BDT 1,799
BDT 1,799 BDT 1,799 BDT 1,799 BDT 1,799
Tax excluded Tax includedTax excludedTax includedTax excluded
BDT 1,799 Tax excluded
BDT 1,799 Tax included
BDT 0 Tax
BDT 1,799 Tax excluded
BDT 0 Tax
BDT 1,799 Tax included
Quantity
In-Stock
25 Items

97 people have purchased this item
25 items in stock
Description

SIM900 GSM/GPRS shield is a GSM modem, which can be integrated into a great number of IoT projects. You can use this shield to accomplish almost anything a normal cell phone can; SMS text messages, Make or receive phone calls, connecting to internet through GPRS, TCP/IP, and more! To top it off, the shield supports quad-band GSM/GPRS network, meaning it works pretty much anywhere in the world.

The SIM900 GSM/GPRS shield is designed to surround the SIM900 chip with everything necessary to interface with Arduino, plus a few extra goodies to take advantage of the chip’s unique features.  Featured By RoboticsBD.

Product Images are shown for illustrative purposes only and may differ from the actual product.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Hardware Overview of SIM900 GSM/GPRS Shield 

Features:

  1. Supports Quad-band: GSM850, EGSM900, DCS1800 and PCS1900
  2. Connect onto any global GSM network with any 2G SIM
  3. Make and receive voice calls using an external earphone & electret microphone
  4. Send and receive SMS messages
  5. Send and receive GPRS data (TCP/IP, HTTP, etc.)
  6. Scan and receive FM radio broadcasts
  7. Transmit Power: Class 4 (2W) for GSM850
  8. Transmit Power: Class 1 (1W) for DCS1800
  9. Serial-based AT Command Set
  10. U.FL and SMA connectors for cell antenna
  11. Accepts Full-size SIM Card.

Connecting SIM900 GSM/GPRS Shield to Arduino UNO:

  1. To start with, connect D7(Tx) and D8(Rx) pin on shield to digital pin#7 and #8 on Arduino. As we’ll be using software serial to talk to the shield, make sure the jumper cap is placed on the software serial port select.

Connecting SIM900 GSM Shield to PC

  1. In order to operate SIM900 GSM Shield directly over PC, you need to connect it to PC using any USB to TTL converter.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

General Specification
ModelBased on SIMCom‘s SIM900 Module
GSM networksQuad-Band 850 / 900/ 1800 / 1900 MHz
ControlAT commands
GPIOs12
Speaker and Headphone jacksYes
Shipment Weight0.05 kg
Shipment Dimensions12 × 8 × 2.5

Please allow 5% measuring deviation due to manual measurement.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Documentation:

  1. Visit Lastminuteengineers blog for Send Receive SMS & Call with SIM900 GSM Shield & Arduino

Package Includes :

1 x GPRS GSM SIM900 Arduino Shield.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Product Details
RBD-0443
25 Items

Specific References

EAN13
0443
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:

Reference: RBD-0313

RC522 RFID Card Reader Module Kit Android NFC supported

(0)
Low power consumption, Low cost, and Compact size Read and write chip Fully integrated at 13.56MHz
BDT 175 BDT 191
BDT 191 BDT 175 tax incl.
BDT 191 BDT 175 tax excl.
BDT 191 BDT 175 tax excl.
BDT 191 BDT 175 tax incl.
BDT 191 BDT 175 tax incl.
BDT 0 BDT 0 Tax
BDT 191 BDT 175 tax excl.
BDT 191 BDT 175 tax excl.
BDT 0 BDT 0 Tax
BDT 191 BDT 175 tax incl.
More RC522 RFID Card Reader Module Kit Android NFC supported
In-Stock
In stock: 66

Reference: RBD-0346

PN532 Compatible Clone NFC RFID Read / Write Module V3 Kit

(0)
The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at...
BDT 419 BDT 590
BDT 590 BDT 419 tax incl.
BDT 590 BDT 419 tax excl.
BDT 590 BDT 419 tax excl.
BDT 590 BDT 419 tax incl.
BDT 590 BDT 419 tax incl.
BDT 0 BDT 0 Tax
BDT 590 BDT 419 tax excl.
BDT 590 BDT 419 tax excl.
BDT 0 BDT 0 Tax
BDT 590 BDT 419 tax incl.
More PN532 Compatible Clone NFC RFID Read / Write Module V3 Kit
In-Stock
In stock: 19
ESP32-CAM-MB MICRO USB Download Module for ESP32 CAM Development Board Robotics Bangladesh ESP32-CAM-MB MICRO USB Download Module for ESP32 CAM Development Board Robotics Bangladesh

Reference: RBD-2044

ESP32-CAM-MB MICRO USB Download Module for ESP32 CAM Development Board

(0)
Model: ESP32-CAM-MB Color: Black Chipset: CH340G Connectivity Technology: USBNote: The camera module is not included with the board. Note: Module Variants can be different as our stock rotates.
BDT 220
BDT 220 tax incl.
BDT 220 tax excl.
BDT 220 tax excl.
BDT 220 tax incl.
BDT 220 tax incl.
BDT 0 Tax
BDT 220 tax excl.
BDT 220 tax excl.
BDT 0 Tax
BDT 220 tax incl.
More ESP32-CAM-MB MICRO USB Download Module for ESP32 CAM Development Board
In-Stock
In stock: 188
Open Smart Rich Shield with Remote Control Robotics Bangladesh

Reference: RBD-2559

Open Smart Rich Shield with Remote Control

(0)
All-in-one multifunctional Arduino shield with onboard sensors and modules Includes IR remote control for wireless interaction and real-time testing Features temperature sensor, LEDs, buzzer, potentiometer, buttons & 4-digit display Simplifies learning by eliminating complex wiring and separate components Compatible with Arduino UNO and similar...
BDT 1,120
BDT 1,120 tax incl.
BDT 1,120 tax excl.
BDT 1,120 tax excl.
BDT 1,120 tax incl.
BDT 1,120 tax incl.
BDT 0 Tax
BDT 1,120 tax excl.
BDT 1,120 tax excl.
BDT 0 Tax
BDT 1,120 tax incl.
More Open Smart Rich Shield with Remote Control
In-Stock
In stock: 4
Sold-out Graphic LCD 84x48 (Nokia 5110) Black on White for Arduino Robotics Bangladesh

Reference: RBD-0399

Graphic LCD 84x48 (Nokia 5110) Black on White for Arduino

(0)
Power supply voltage: 2.7 V-3.3 V/5 V Data interface level: 2.7-5V. Resolution: 84 x 48 pixel Backlight power supply voltage: highest 3.3 V. Backlight: Blue. RoboticsBDNote: Current stock is tested by us. 
BDT 260
BDT 260 tax incl.
BDT 260 tax excl.
BDT 260 tax excl.
BDT 260 tax incl.
BDT 260 tax incl.
BDT 0 Tax
BDT 260 tax excl.
BDT 260 tax excl.
BDT 0 Tax
BDT 260 tax incl.
More Graphic LCD 84x48 (Nokia 5110) Black on White for Arduino
Sold-out
In stock: 0
Eye Blink Detection Analog & Digital Sensor with Goggles High Quality Robotics Bangladesh Eye Blink Detection Analog & Digital Sensor with Goggles High Quality Robotics Bangladesh

Reference: RBD-2096

Eye Blink Detection Analog & Digital Sensor with Goggles High Quality

(0)
The Eye Blink Detection Analog & Digital Sensor with Goggles is a powerful tool designed for Arduino enthusiasts, developers, and researchers interested in human-computer interaction and biometric sensing. Why is an analog eyeblink sensor better than a digital eyeblink sensor? Currently, most eye blink sensors on the market are digital. they can only...
BDT 590
BDT 590 tax incl.
BDT 590 tax excl.
BDT 590 tax excl.
BDT 590 tax incl.
BDT 590 tax incl.
BDT 0 Tax
BDT 590 tax excl.
BDT 590 tax excl.
BDT 0 Tax
BDT 590 tax incl.
More Eye Blink Detection Analog & Digital Sensor with Goggles High Quality
In-Stock
In stock: 13
Pack 16x2 Serial LCD Module Display for Arduino Assembled Robotics Bangladesh 16x2 Serial LCD Module Display for Arduino Assembled Robotics Bangladesh

Reference: RBD-1349

16x2 Serial LCD Module Display for Arduino Assembled

(0)
For Standard LCD 16x2. Press here.For Standard LCD 16x2 with Male Header. Press hereFor Standard LCD 16x2 with Female Header. Press hereFor Standard LCD 16x2 with I2C adapter board soldered. Press here.For Standard LCD 16x2 with White Background. Press here.For Standard LCD 16x2 with Blue Background. Press here. Model: LCD1602 Interface: I2C Interface...
BDT 340
BDT 340 tax incl.
BDT 340 tax excl.
BDT 340 tax excl.
BDT 340 tax incl.
BDT 340 tax incl.
BDT 0 Tax
BDT 340 tax excl.
BDT 340 tax excl.
BDT 0 Tax
BDT 340 tax incl.
More 16x2 Serial LCD Module Display for Arduino Assembled
In-Stock
In stock: 16
20mm 2.4Mhz Ultrasonic Mist Maker Fogger Atomizing Transducer Robotics Bangladesh 20mm 2.4Mhz Ultrasonic Mist Maker Fogger Atomizing Transducer Robotics Bangladesh

Reference: RBD-2249

20mm 2.4Mhz Ultrasonic Mist Maker Fogger Atomizing Transducer

(0)
Made From High-Quality Materials. Electronic High-Frequency Oscillations (2.4MHz). Material: Ceramic, Wire Diameter: Atomizer: 1.58cm/0.62in; Sealing ring: 2.0cm/0.75in
BDT 199
BDT 199 tax incl.
BDT 199 tax excl.
BDT 199 tax excl.
BDT 199 tax incl.
BDT 199 tax incl.
BDT 0 Tax
BDT 199 tax excl.
BDT 199 tax excl.
BDT 0 Tax
BDT 199 tax incl.
More 20mm 2.4Mhz Ultrasonic Mist Maker Fogger Atomizing Transducer
In-Stock
In stock: 137
Arduino Ethernet Shield W5100 R3 Robotics Bangladesh Arduino Ethernet Shield W5100 R3 Robotics Bangladesh

Reference: RBD-2490

Arduino Ethernet Shield W5100 R3

(0)
Arduino Ethernet Shield W5100 R3 for Arduino UNO, Mega 2560, Duemilanove Built-in WizNet W5100 TCP/IP microprocessor for easy network connectivity Supports up to 4 simultaneous socket connections Includes Micro-SD card slot for network storage expansion Fully compatible with Arduino IDE Ethernet library for quick programming PoE (Power-over-Ethernet)...
BDT 1,250
BDT 1,250 tax incl.
BDT 1,250 tax excl.
BDT 1,250 tax excl.
BDT 1,250 tax incl.
BDT 1,250 tax incl.
BDT 0 Tax
BDT 1,250 tax excl.
BDT 1,250 tax excl.
BDT 0 Tax
BDT 1,250 tax incl.
More Arduino Ethernet Shield W5100 R3
In-Stock
In stock: 24
PC817 4 Channel Optocoupler Isolation Board Robotics Bangladesh PC817 4 Channel Optocoupler Isolation Board Robotics Bangladesh

Reference: RBD-1815

PC817 4 Channel Optocoupler Isolation Board

(0)
I/O Isolation for MCUs (Micro Controller Units) Noise Suppression in Switching Circuits Driving Port Signal Voltage: 3.6-24V Output Port Voltage Port: 3.6-30V Output Can Be Switched From Pull-Up or Pull-Down With Jumpers.
BDT 270
BDT 270 tax incl.
BDT 270 tax excl.
BDT 270 tax excl.
BDT 270 tax incl.
BDT 270 tax incl.
BDT 0 Tax
BDT 270 tax excl.
BDT 270 tax excl.
BDT 0 Tax
BDT 270 tax incl.
More PC817 4 Channel Optocoupler Isolation Board
In-Stock
In stock: 18
Arduino Bootloader AVR ISP Shield for Bootloader Burning Robotics Bangladesh Arduino Bootloader AVR ISP Shield for Bootloader Burning Robotics Bangladesh

Reference: RBD-3854

Arduino Bootloader AVR ISP Shield for Bootloader Burning

(0)
The Arduino Bootloader Shield AVR ISP Programmable Expansion Board is a versatile and easy-to-use shield designed for burning bootloaders and modifying fuse bits on Arduino-compatible microcontrollers and other AVR-based boards.
BDT 610
BDT 610 tax incl.
BDT 610 tax excl.
BDT 610 tax excl.
BDT 610 tax incl.
BDT 610 tax incl.
BDT 0 Tax
BDT 610 tax excl.
BDT 610 tax excl.
BDT 0 Tax
BDT 610 tax incl.
More Arduino Bootloader AVR ISP Shield for Bootloader Burning
In stock
In stock: 14
3.5inch LCD Display Shield for Arduino with Touch Robotics Bangladesh

Reference: RBD-2551

3.5inch LCD Display Shield for Arduino with Touch

(0)
Supports development boards such as Arduino UNO and Mega2560 for plug-in use without wiring Arduino IL9486 Driver 480X320 resolution, clear display Support 16-bit RGB 65K color display, display rich colors 8-bit parallel bus, faster than serial SPI refresh On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V operating voltage Easy to expand the...
BDT 1,990
BDT 1,990 tax incl.
BDT 1,990 tax excl.
BDT 1,990 tax excl.
BDT 1,990 tax incl.
BDT 1,990 tax incl.
BDT 0 Tax
BDT 1,990 tax excl.
BDT 1,990 tax excl.
BDT 0 Tax
BDT 1,990 tax incl.
More 3.5inch LCD Display Shield for Arduino with Touch
In-Stock
In stock: 19
CNC Shield V4 Engraving Machine Expansion Board for Arduino Nano Robotics Bangladesh CNC Shield V4 Engraving Machine Expansion Board for Arduino Nano Robotics Bangladesh

Reference: RBD-3104

CNC Shield V4 Engraving Machine Expansion Board for Arduino Nano

(0)
CNC Shield V4 expansion board designed for Arduino Nano Supports 3-axis stepper motor control with A4988 driver modules (not included) GRBL compatible, ideal for engraving machines and 3D printers Works with two-phase four-wire stepper motors up to 2A Provides easy connection for endstops, I2C modules, and LCDs Compact design with 7.5–12V input and DC 5V...
BDT 450
BDT 450 tax incl.
BDT 450 tax excl.
BDT 450 tax excl.
BDT 450 tax incl.
BDT 450 tax incl.
BDT 0 Tax
BDT 450 tax excl.
BDT 450 tax excl.
BDT 0 Tax
BDT 450 tax incl.
More CNC Shield V4 Engraving Machine Expansion Board for Arduino Nano
In-Stock
In stock: 21
Gravity: Nano I/O Shield for Arduino Nano Robotics Bangladesh

Reference: RBD-3623

Brand: DFRobot

Gravity: Nano I/O Shield for Arduino Nano

(0)
The Arduino Nano I/O Sensor Shield is an expansion board compatible with various microcontrollers, offering multiple power input options and easy sensor connections.
BDT 1,290
BDT 1,290 tax incl.
BDT 1,290 tax excl.
BDT 1,290 tax excl.
BDT 1,290 tax incl.
BDT 1,290 tax incl.
BDT 0 Tax
BDT 1,290 tax excl.
BDT 1,290 tax excl.
BDT 0 Tax
BDT 1,290 tax incl.
More Gravity: Nano I/O Shield for Arduino Nano
In stock
In stock: 7
CJMCU Virtual Keyboard with Memory Card ATMega32U4 for Arduino Robotics Bangladesh

Reference: RBD-3121

CJMCU Virtual Keyboard with Memory Card ATMega32U4 for Arduino

(0)
ATmega32U4-based CJMCU Virtual Keyboard for Arduino scripting and automation Functions as a USB HID device for executing keyboard input or custom payloads Built-in microSD slot supports FAT32 cards for script storage and execution Plug-and-play module programmable via Arduino IDE (no soldering required) LED indicator provides visual feedback for script...
BDT 2,550
BDT 2,550 tax incl.
BDT 2,550 tax excl.
BDT 2,550 tax excl.
BDT 2,550 tax incl.
BDT 2,550 tax incl.
BDT 0 Tax
BDT 2,550 tax excl.
BDT 2,550 tax excl.
BDT 0 Tax
BDT 2,550 tax incl.
More CJMCU Virtual Keyboard with Memory Card ATMega32U4 for Arduino
In-Stock
In stock: 15
L298P Motor Driver Shield for Arduino Robotics Bangladesh L298P Motor Driver Shield for Arduino Robotics Bangladesh

Reference: RBD-2145

L298P Motor Driver Shield for Arduino

(0)
L298P based Arduino motor driver shield Onboard Buzzer (D4). Onboard Bluetooth interface, you can directly plug, no wiring required. Six Analog interface. Forward, Backward steering indicators
BDT 990
BDT 990 tax incl.
BDT 990 tax excl.
BDT 990 tax excl.
BDT 990 tax incl.
BDT 990 tax incl.
BDT 0 Tax
BDT 990 tax excl.
BDT 990 tax excl.
BDT 0 Tax
BDT 990 tax incl.
More L298P Motor Driver Shield for Arduino
In-Stock
In stock: 11
You might also like
CP2102 Module USB to TTL Serial UART Converter Robotics Bangladesh

Reference: RBD-1770

CP2102 Module USB to TTL Serial UART Converter

(0)
Brand new and high quality Included USB transceiver, without external circuit device With 3.3V and 5V dual power output With three LEDs: power indicator, data reception indicator, the data transmission indicator, working status Meets the USB2.0 specification requirements With self-recovery fuse. In the event of the accidental short circuit, it can...
BDT 330
BDT 330 tax incl.
BDT 330 tax excl.
BDT 330 tax excl.
BDT 330 tax incl.
BDT 330 tax incl.
BDT 0 Tax
BDT 330 tax excl.
BDT 330 tax excl.
BDT 0 Tax
BDT 330 tax incl.
More CP2102 Module USB to TTL Serial UART Converter
In-Stock
In stock: 14
DT-06 TTL to WIFI Module Robotics Bangladesh

Reference: RBD-1578

DT-06 TTL to WIFI Module

(0)
Support serial AT command Support re-programmable, OTA firmware update Seamless transparent transmission between serial and WiFi Built-in HTTP Web Server, support configure parameters by web page
BDT 490
BDT 490 tax incl.
BDT 490 tax excl.
BDT 490 tax excl.
BDT 490 tax incl.
BDT 490 tax incl.
BDT 0 Tax
BDT 490 tax excl.
BDT 490 tax excl.
BDT 0 Tax
BDT 490 tax incl.
More DT-06 TTL to WIFI Module
In-Stock
In stock: 10
On sale! FTDI USB to TTL Serial Converter Adapter FT232RL Robotics Bangladesh FTDI USB to TTL Serial Converter Adapter FT232RL Robotics Bangladesh

Reference: RBD-0658

FTDI USB to TTL Serial Converter Adapter FT232RL

(0)
Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini Original FTDI FT232 chip, stable performance USB power has current protection, using 500MA self-restore fuse RXD/TXD transceiver communication indicator With power, sending, receiving indicator, working status LED indicators Mini USB Port Connection Support 3.3V, 5V...
BDT 359
BDT 359 tax incl.
BDT 359 tax excl.
BDT 359 tax excl.
BDT 359 tax incl.
BDT 359 tax incl.
BDT 0 Tax
BDT 359 tax excl.
BDT 359 tax excl.
BDT 0 Tax
BDT 359 tax incl.
More FTDI USB to TTL Serial Converter Adapter FT232RL
In-Stock
In stock: 119
GPS GSM GPRS SIM808 Module (Arduino Compatible) Robotics Bangladesh GPS GSM GPRS SIM808 Module (Arduino Compatible) Robotics Bangladesh

Reference: RBD-0579

GPS GSM GPRS SIM808 Module (Arduino Compatible)

(0)
Quad-band 850/900/1800/1900MHz GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load) GPRS mobile station class B Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands) Supports charging control for Li-Ion battery Supports Real-Time Clock Integrated GPS/CNSS and supports A-GPS Low power consumption, 10mA in sleep...
BDT 3,450
BDT 3,450 tax incl.
BDT 3,450 tax excl.
BDT 3,450 tax excl.
BDT 3,450 tax incl.
BDT 3,450 tax incl.
BDT 0 Tax
BDT 3,450 tax excl.
BDT 3,450 tax excl.
BDT 0 Tax
BDT 3,450 tax incl.
More GPS GSM GPRS SIM808 Module (Arduino Compatible)
In-Stock
In stock: 35
SIM808 GPRS/GSM+GPS Shield Robotics Bangladesh SIM808 GPRS/GSM+GPS Shield Robotics Bangladesh

Reference: RBD-1037

SIM808 GPRS/GSM+GPS Shield

(0)
Quad-band 850/900/1800/1900MHz Inner MT3337 GPS receiver, -165dBm precision, control on a same serial port. Earphone/ microphone outputs on a card or external 32-ohm speaker + supports voice calls with an electret microphone. Sending and receiving SMS.
BDT 4,690
BDT 4,690 tax incl.
BDT 4,690 tax excl.
BDT 4,690 tax excl.
BDT 4,690 tax incl.
BDT 4,690 tax incl.
BDT 0 Tax
BDT 4,690 tax excl.
BDT 4,690 tax excl.
BDT 0 Tax
BDT 4,690 tax incl.
More SIM808 GPRS/GSM+GPS Shield
In-Stock
In stock: 12
SIM900A Mini Module 5V Robotics Bangladesh SIM900A Mini Module 5V Robotics Bangladesh

Reference: RBD-0318

SIM900A Mini Module 5V

(0)
This module is intended for advanced users who require moderate knowledge of GSM systems and microcontrollers. It needs wiring and firmware updates to unlock the country lock. Dual-Band 900/ 1800 MHz GPRS multi-slot class 10/8GPRS mobile station class B Compliant to GSM phase 2/2+ Dimensions: 24*24*3 mm Weight: 3.4g Control via AT commands (GSM 07.07...
BDT 712
BDT 712 tax incl.
BDT 712 tax excl.
BDT 712 tax excl.
BDT 712 tax incl.
BDT 712 tax incl.
BDT 0 Tax
BDT 712 tax excl.
BDT 712 tax excl.
BDT 0 Tax
BDT 712 tax incl.
More SIM900A Mini Module 5V
In-Stock
In stock: 152
Sold-out TTL to RS485 Converter 3.3V/5V Hardware Automatic Control Converter Module Robotics Bangladesh TTL to RS485 Converter 3.3V/5V Hardware Automatic Control Converter Module Robotics Bangladesh

Reference: RBD-1816

TTL to RS485 Converter 3.3V/5V Hardware Automatic Control Converter Module

(0)
Anti-Interference Ability Baud rate: 110 ~ 256000bps Operating Voltage: 3v  to  30VDC Compatible With Both 3V and 5V logic
BDT 440
BDT 440 tax incl.
BDT 440 tax excl.
BDT 440 tax excl.
BDT 440 tax incl.
BDT 440 tax incl.
BDT 0 Tax
BDT 440 tax excl.
BDT 440 tax excl.
BDT 0 Tax
BDT 440 tax incl.
More TTL to RS485 Converter 3.3V/5V Hardware Automatic Control Converter Module
Sold-out
In stock: 0

Follow us on Facebook