Banner

SIM808 GPRS/GSM+GPS Shield

Reference RBD-1037

Quad-band 850/900/1800/1900MHz
Inner MT3337 GPS receiver, -165dBm precision, control on a same serial port.
Earphone/ microphone outputs on a card or external 32-ohm speaker + supports voice calls with an electret microphone.
Sending and receiving SMS.

Description
Product Details

Description

SIM808 module is a GSM/GPS/BT three-in-one function module. It is based on the latest GSM/GPS/BT module SIM808 from SIMCOM, supports GSM/GPRS Quad-Band network and combines GPS technology for satellite navigation. It has high GPS receive sensitivity with 22 tracking and 66 acquisition receiver channels. Besides, it supports A-GPS that available for indoor localization， and it also supports for Bluetooth 3.0.

The module is controlled by AT command via UART and supports 3.3V and 5V logical level.

This shield is built to directly work with Arduino

Featured By RoboticsBD.

Product Images are shown for illustrative purposes only and may differ from the actual product.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

Application:

M2M (Machine 2 Machine) Application - To transfer control data using SMS or GPRS between two machines located at two different factories.
Remote control of appliances - Send SMS while you are at your office to turn on or off your washing machine at home.
Remote Weather station or a Wireless Sensor Network - Make it with [Crowduino v1.0|Crowduino v1.0] and create a sensor node capable of transferring sensor data (like from a weather station - temperature, humidity, etc.) to a web server
Vehicle Tracking System - Install GPRS+GSM+GPS Shield in your car and publish your location live on the internet. Can be used as an automotive burglar alarm. RoboticsBD

Features:

Quad-band 850/900/1800/1900MHz
GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load)
GPRS mobile station class B
Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands)
Supports charging control for Li-Ion battery
Supports Real-Time Clock
Integrated GPS/CNSS and supports A-GPS
Low power consumption, 10mA in sleep mode
Supports GPS NMEA protocol
AT command operation, can support SMS, phone, GPRS data, GPS data is automatically output, embedded TCP protocol to support transparent mode and command mode, supports HTTP protocol to support DTMF decoding, support MMS, support recording function, etc.
Standard Micro SIM Card. RoboticsBD

Interface Function:

Power supply - Vin connected to external 5~9VDC power supply

Antenna interface - connected to external antenna

Serial port select - select either software serial port or hareware serial port to be connected to GPRS+GSM+GPS Shield Shield

Hardware Serial - D0/D1 of Arduino/Crowduino

Software serial - D7/D8 of Arduino/Crowduino

Status LED - tell whether the power of SIM808 is on

Net light - tell the status about SIM808 linking to the net

1PPS - tell the status about SIM808 get the location

UART of SIM808 - UART pins breakout of SIM808

Microphone - to answer the phone call

Speaker - to answer the phone call

GPIO,PWM and ADC of SIM808 - GPIO,PWM and ADC pins breakout of SIM808

Power key - power up and down for SIM808

Cautions:

Make sure your SIM card is unlocked.
The product is provided as is without an insulating enclosure. Please observe ESD precautions especially in dry (low humidity) weather.
The factory default setting for the GPRS Shield UART is autoloading. It supports baud rate from 1200 bps to 115200bps. (Can be changed using AT commands). RoboticsBD

Pins usage on Arduino:

D0 - Unused if you select hardware serial port to communicate with GPRS+GSM+GPS Shield

D1 - Unused if you select hardware serial port to communicate with GPRS+GSM+GPS Shield

D2 - Unused

D3 - Unused

D4 - Unused

D5 - Unused

D6 - Unused

D7 - Used if you select software serial port to communicate with GPRS+GSM+GPS Shield

D8 - Used if you select software serial port to communicate with GPRS+GSM+GPS Shield

D9 - Used for software control the power up or down of the SIM808

D10 - Unused

D11 - Unused

D12 - Unused

D13 - Unused

D14(A0) - Unused

D15(A1) - Unused

D16(A2) - Unused

D17(A3) - Unused

D18(A4) - Unused

D19(A5) - Unused

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

General Specification
Model	SIM808
Supports	2G Sim
Input Voltage (Volt)	5V
Input current (min)	2A
Operating Voltage (V)	5
Accuracy (meter)	Approx. 2.5
Dimensions (mm)	80 x 50 x 14
Weight (gm)	30
Shipment Weight	0.05 kg
Shipment Dimensions	10 × 6 × 2 cm

Please allow 5% measuring deviation due to manual measurement.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

Documentation:

Package Includes:

1 x SIM808 GPRS/GSM+GPS Shield.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD

Product Details

Reference RBD-1037

In stock 12 Items

Specific References

EAN13: 1037

Comments (0)

Grade

No customer reviews for the moment.

16 other products in the same category:

Reference: RBD-2461

XL7015 5V-80V DC-DC 0.8A Dc converter Step-down Module Wide Voltage Input LM2596

(0)

Wide 5V–80V input voltage range with high efficiency. Adjustable output voltage from 5V to 20V. Supports up to 0.8A output current with stable performance. Built-in protections: thermal shutdown, short-circuit, and overcurrent. Compact module design, ideal for electric vehicle controllers and DIY power projects. Superior line and load regulation compared...

BDT 180

BDT 180 tax incl.

BDT 180 tax excl.

BDT 180 tax incl.

BDT 0 Tax

BDT 180 tax excl.

BDT 0 Tax

BDT 180 tax incl.

In-Stock

In stock: 132

Xbee Shield for Arduino (without Xbee) Robotics Bangladesh

Reference: RBD-0189

Brand: DFRobot

Xbee Shield for Arduino (without Xbee)

(0)

Xbee Shield for Arduino (without Xbee) INTRODUCTION: The XBee Expansion Board is a compliant solution designed to meet low-cost, low-power wireless sensor networks with special needs.The module is easy to use, low power consumption, and the provision of critical data between devices reliable transmission.

BDT 1,200

BDT 1,200 tax incl.

BDT 1,200 tax excl.

BDT 1,200 tax incl.

BDT 0 Tax

BDT 1,200 tax excl.

BDT 0 Tax

BDT 1,200 tax incl.

Last items in stock

In stock: 2

Reference: RBD-3444

VS1053 MP3 Recording Module Development Board with Onboard Recording Function

(0)

VS1053 MP3 Recording Module with real-time OGG encoding support Supports multiple audio formats including MP3, WAV, and MIDI SPI interface for easy microcontroller integration Onboard microphone, line-in input, and stereo headphone output TF (microSD) card slot for audio storage and playback Ideal for MP3 players, voice recorders, and embedded audio systems

BDT 680

BDT 680 tax incl.

BDT 680 tax excl.

BDT 680 tax incl.

BDT 0 Tax

BDT 680 tax excl.

BDT 0 Tax

BDT 680 tax incl.

In-Stock

In stock: 10

Reference: RBD-1635

Dual Channel Motor Driver Shield For Arduino

(0)

Logic control, 5V from Arduino main board Polarity protection for External motor power input 2 fast test buttons for each motor channel Motor Driven Voltage：6.5 to 12VDC(VIN Power Supply), 5.0 to 26VDC (External Power Source) Up to 2A current each channel Pin 4, 5,6,7 are used to drive two DC motor Support PWM speed control Support advance speed control

BDT 1,399

BDT 1,399 tax incl.

BDT 1,399 tax excl.

BDT 1,399 tax incl.

BDT 0 Tax

BDT 1,399 tax excl.

BDT 0 Tax

BDT 1,399 tax incl.

In-Stock

In stock: 4

Reference: RBD-2087

Photo Interrupter Module

(0)

Voltage 5V Photo interruption module triggers a signal when light is blocked between the opening of the sensor.

BDT 75

BDT 75 tax incl.

BDT 75 tax excl.

BDT 75 tax incl.

BDT 0 Tax

BDT 75 tax excl.

BDT 0 Tax

BDT 75 tax incl.

In-Stock

In stock: 68

Reference: 1353

Jumper Wire Single 30cm

(0)

Length: 12.5 inches/30 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.

BDT 5

BDT 5 tax incl.

BDT 5 tax excl.

BDT 5 tax incl.

BDT 0 Tax

BDT 5 tax excl.

BDT 0 Tax

BDT 5 tax incl.

In-Stock

In stock: 114

Reference: RBD-1541

37 In 1 Sensor Module Board Set Kit For Arduino with Box

(0)

For beginners who are interested in Arduino A complete set of Arduino’s most common and useful electronic components Infrared sensor receiving module Laser sensor module Temperature and humidity sensor module Infrared sensor module 5v relay module Obstacle avoidance sensor module.

BDT 1,990

BDT 1,990 tax incl.

BDT 1,990 tax excl.

BDT 1,990 tax incl.

BDT 0 Tax

BDT 1,990 tax excl.

BDT 0 Tax

BDT 1,990 tax incl.

In-Stock

In stock: 4

On sale! Pre-Order

Reference: RBD-0334

9 Degrees of Freedom Breakout- MPU9150

(0)

The 9DOF MPU-9150 is the world’s first 9-axis MotionTracking MEMS device designed for the low power, low cost, and high performance requirements of consumer electronics equipment including smartphones, tablets and wearable sensors. And guess what? You get to play with it. ✅ True 9DOF ModulesOriginal MPU9255 9-Axis Motion Tracking Module with...

BDT 2,000

BDT 2,000 tax incl.

BDT 2,000 tax excl.

BDT 2,000 tax incl.

BDT 0 Tax

BDT 2,000 tax excl.

BDT 0 Tax

BDT 2,000 tax incl.

Pre-Order

In stock: 0

- BDT 16 Reduced price

Reference: RBD-0313

RC522 RFID Card Reader Module Kit Android NFC supported

(0)

Low power consumption, Low cost, and Compact size Read and write chip Fully integrated at 13.56MHz

BDT 175 BDT 191

BDT 191 BDT 175 tax incl.

BDT 191 BDT 175 tax excl.

BDT 191 BDT 175 tax incl.

BDT 0 BDT 0 Tax

BDT 191 BDT 175 tax excl.

BDT 0 BDT 0 Tax

BDT 191 BDT 175 tax incl.

In-Stock

In stock: 66

Reference: RBD-0392

Ardumoto Shield L298P Motor Driver

(0)

L298P based Arduino motor driver shield Forward, Backward steering indicators Can Drive 2 DC Motors Up to 2A of Maximum Current. RoboticsBD

BDT 699

BDT 699 tax incl.

BDT 699 tax excl.

BDT 699 tax incl.

BDT 0 Tax

BDT 699 tax excl.

BDT 0 Tax

BDT 699 tax incl.

In-Stock

In stock: 12

Reference: RBD-2091

MY18E20 DS18B20 Compatible Temperature Sensor Module

(0)

Digital signal output 18B20 Temperature Sensor Chip (MY18E20 or DS18b20) Resolution adjustment ranges from 9-12 bytes. Send data via a pin Temperature measurement ranges: -55°C to +125°C, be accurate to 0.5°C.Compatible with DS18B20

BDT 99

BDT 99 tax incl.

BDT 99 tax excl.

BDT 99 tax incl.

BDT 0 Tax

BDT 99 tax excl.

BDT 0 Tax

BDT 99 tax incl.

In-Stock

In stock: 115

Reference: RBD-2490

Arduino Ethernet Shield W5100 R3

(0)

Arduino Ethernet Shield W5100 R3 for Arduino UNO, Mega 2560, Duemilanove Built-in WizNet W5100 TCP/IP microprocessor for easy network connectivity Supports up to 4 simultaneous socket connections Includes Micro-SD card slot for network storage expansion Fully compatible with Arduino IDE Ethernet library for quick programming PoE (Power-over-Ethernet)...

BDT 1,250

BDT 1,250 tax incl.

BDT 1,250 tax excl.

BDT 1,250 tax incl.

BDT 0 Tax

BDT 1,250 tax excl.

BDT 0 Tax

BDT 1,250 tax incl.

In-Stock

In stock: 24

Reference: RBD-2114

Multifunctional Expansion Board LM35 Temperature Buzzer for UNO

(0)

Multifunctional Expansion Board LM35 Temperature Buzzer for Arduino UNO Fully compatible with Arduino UNO interface Integrates multiple module functions Provides basic experimental modules for beginners Expansion ports for additional module experimentsLM35 Might be a clone will not produce expected value.

BDT 513

BDT 513 tax incl.

BDT 513 tax excl.

BDT 513 tax incl.

BDT 0 Tax

BDT 513 tax excl.

BDT 0 Tax

BDT 513 tax incl.

In-Stock

In stock: 10

Reference: RBD-2475

Mechanical Decade Counters Small Size 5 Counter

(0)

Compact mechanical decade counters bundled in a set of 5 with end caps Each counter features two buttons – up and down counting Counts from 0–9 and resets back to 0 automatically Snap-together design allows flexible configurations Includes PCB with 11 contacts for easy interfacing (1 common + 10 outputs) Ideal for DIY electronics, robotics, test...

BDT 580

BDT 580 tax incl.

BDT 580 tax excl.

BDT 580 tax incl.

BDT 0 Tax

BDT 580 tax excl.

BDT 0 Tax

BDT 580 tax incl.

In-Stock

In stock: 27

- BDT 50 Reduced price

Liquid Level Sensor for Arduino (WaveShare) Robotics Bangladesh

Reference: RBD-0337

Brand: Waveshare

Liquid Level Sensor for Arduino (WaveShare)

(0)

Detection depth: 48mm Power: 2.0V ~ 5.0V Dimension: 19.0mm * 63.0mm Mounting holes size: 2.0mm

BDT 449 BDT 499

BDT 499 BDT 449 tax incl.

BDT 499 BDT 449 tax excl.

BDT 499 BDT 449 tax incl.

BDT 0 BDT 0 Tax

BDT 499 BDT 449 tax excl.

BDT 0 BDT 0 Tax

BDT 499 BDT 449 tax incl.

In-Stock

In stock: 18

Reference: RBD-1219

3.5inch LCD Display Shield for Arduino

(0)

Supports development boards such as Arduino UNO and Mega2560 for plug-in use without wiring 480X320 resolution, clear display Support 16-bit RGB 65K color display, display rich colors 8-bit parallel bus, faster than serial SPI refresh On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V operating voltage Easy to expand the experiment with SD card...

BDT 1,680

BDT 1,680 tax incl.

BDT 1,680 tax excl.

BDT 1,680 tax incl.

BDT 0 Tax

BDT 1,680 tax excl.

BDT 0 Tax

BDT 1,680 tax incl.

In-Stock

In stock: 9

Frequently purchased together
Products from the same category

Reference: RBD-1354

Jumper Wire Single 20cm

(0)

Length: 8 inches/20 CM (Long) Material: Copper Plated Pin Spacing: 2.54mm.

BDT 3

BDT 3 tax incl.

BDT 3 tax excl.

BDT 3 tax incl.

BDT 0 Tax

BDT 3 tax excl.

BDT 0 Tax

BDT 3 tax incl.

In-Stock

In stock: 5824

Reference: 0245

Kiloohm (KΩ) 1/4w Resistors - Pack of 5

(0)

Choose your desire Resistor value from below:

BDT 5

BDT 5 tax incl.

BDT 5 tax excl.

BDT 5 tax incl.

BDT 0 Tax

BDT 5 tax excl.

BDT 0 Tax

BDT 5 tax incl.

In-Stock

In stock: 771

Reference: RBD-0094

Arduino Uno R3

(0)

The Arduino Uno R3 High-Quality Edition Arduino UNO in BangladeshMicro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6. The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...

BDT 988

BDT 988 tax incl.

BDT 988 tax excl.

BDT 988 tax incl.

BDT 0 Tax

BDT 988 tax excl.

BDT 0 Tax

BDT 988 tax incl.

In-Stock

In stock: 480

Reference: RBD-0732

9V Battery to 2.1mm for Arduino Uno

(0)

Excellent material It is an environmental 9V battery buckle The Cable Length: 12cm Approx. Convenient for connecting a battery to your application. Save power and protect the environment Good electrical conductivity and comfortable sense of touch

BDT 22

BDT 22 tax incl.

BDT 22 tax excl.

BDT 22 tax incl.

BDT 0 Tax

BDT 22 tax excl.

BDT 0 Tax

BDT 22 tax incl.

In-Stock

In stock: 487

On sale!

Reference: RBD-0280

Breadboard Mini Size Bare 170 Tie Points

(0)

Tie-points: 170 (10×17) Size: 48 x 35 x 10 mm(LxWxH). Use: experimental, testing, robot Matching jumper, diameter 0.8mm Phosphor bronze nickel plated spring clips Accepts a variety of wire sizes (29-20 the AWG) **1 pcs Random Color

BDT 45

BDT 45 tax incl.

BDT 45 tax excl.

BDT 45 tax incl.

BDT 0 Tax

BDT 45 tax excl.

BDT 0 Tax

BDT 45 tax incl.

In-Stock

In stock: 297

Reference: RBD-0694

ESP8266 CH340 NodeMCU Wifi Module Lua V3

(0)

Power input: 4.5V ~ 9V (10VMAX), USB-powered Transfer rate: 110-460800bps Support UART / GPIO data communication interface Support Smart Link Smart Networking Working temperature: -40°C ~ + 125°C Drive Type: Dual high-power H-bridge Don’t need to download resetting A great set of tools to develop ESP8266 Flash size: 4MByte Lowest cost WI-FI Note: The...

BDT 350

BDT 350 tax incl.

BDT 350 tax excl.

BDT 350 tax incl.

BDT 0 Tax

BDT 350 tax excl.

BDT 0 Tax

BDT 350 tax incl.

In-Stock

In stock: 401

Sold-out

GPS Antenna 1575.42 MHz Robotics Bangladesh

Reference: RBD-0729

GPS Antenna 1575.42 MHz SMA Male 3 Meter

(0)

Frequency (MHz) 1575 +/- 5 MHz Gain > 28 dBi (with LNA) Impedance (Ω) 50 Ω VSWR < 1.5 Polarization RHCP Power Handling (W) 50 watts Cable Length: 3Meter Connector: SMA-Male

BDT 450

BDT 450 tax incl.

BDT 450 tax excl.

BDT 450 tax incl.

BDT 0 Tax

BDT 450 tax excl.

BDT 0 Tax

BDT 450 tax incl.

Sold-out

In stock: 0

Reference: RBD-0733

RP-SMA to U.FL Adapter RF Cable - Female 150mm

(0)

Connects Devices & Antennas: Ideal for WiFi, Bluetooth, and nRF devices to 2.4GHz antennas. Enhanced Usability: 150mm length (compared to standard 100mm) provides more flexibility for enclosure integration. Reliable Signal: 50Ω impedance ensures efficient signal transmission. Durable Construction: Built with high-quality materials for long-lasting...

BDT 160

BDT 160 tax incl.

BDT 160 tax excl.

BDT 160 tax incl.

BDT 0 Tax

BDT 160 tax excl.

BDT 0 Tax

BDT 160 tax incl.

In-Stock

In stock: 35

Arduino Uno R3

(0)

BDT 988

BDT 988 tax incl.

BDT 988 tax excl.

BDT 988 tax incl.

BDT 0 Tax

BDT 988 tax excl.

BDT 0 Tax

BDT 988 tax incl.

In-Stock

In stock: 480

On sale!

Reference: RBD-0443

GPRS GSM SIM900 Arduino Shield

(0)

Based on SIMCom‘s SIM900 Module Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. Control by AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).

BDT 1,799

BDT 1,799 tax incl.

BDT 1,799 tax excl.

BDT 1,799 tax incl.

BDT 0 Tax

BDT 1,799 tax excl.

BDT 0 Tax

BDT 1,799 tax incl.

In-Stock

In stock: 25

Reference: RBD-0579

GPS GSM GPRS SIM808 Module (Arduino Compatible)

(0)

Quad-band 850/900/1800/1900MHz GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load) GPRS mobile station class B Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands) Supports charging control for Li-Ion battery Supports Real-Time Clock Integrated GPS/CNSS and supports A-GPS Low power consumption, 10mA in sleep...

BDT 3,450

BDT 3,450 tax incl.

BDT 3,450 tax excl.

BDT 3,450 tax incl.

BDT 0 Tax

BDT 3,450 tax excl.

BDT 0 Tax

BDT 3,450 tax incl.

In-Stock

In stock: 35

Reference: RBD-0318

SIM900A Mini Module 5V

(0)

This module is intended for advanced users who require moderate knowledge of GSM systems and microcontrollers. It needs wiring and firmware updates to unlock the country lock. Dual-Band 900/ 1800 MHz GPRS multi-slot class 10/8GPRS mobile station class B Compliant to GSM phase 2/2+ Dimensions: 24*24*3 mm Weight: 3.4g Control via AT commands (GSM 07.07...

BDT 712

BDT 712 tax incl.

BDT 712 tax excl.

BDT 712 tax incl.

BDT 0 Tax

BDT 712 tax excl.

BDT 0 Tax

BDT 712 tax incl.

In-Stock

In stock: 152

Follow us on Facebook

Facebook

SIM808 GPRS/GSM+GPS Shield

The module is controlled by AT command via UART and supports 3.3V and 5V logical level.

This shield is built to directly work with Arduino

Application:

Features:

Interface Function:

Cautions:

Pins usage on Arduino:

Documentation:

Package Includes:

Subscribe To When In Stock

Subscribe To When In Stock

Follow us on Facebook