• Banner

Active filters
  • Availability: In stock
  • Categories: Arduino Boards
  • Categories: Display
  • Categories: Motor Driver
  • Categories: Orange Pi
  • Categories: Raspberry Pi
  • Categories: Sensors

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

(0)
Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 65

Reference: RBD-0433

I2C LCD Adapter Module

(0)
5V power supply. Serial I2C control of LCD display using PCF8574. RoboticsBD Backlight can be enabled or disabled via a jumper on the board. Contrast control via a potentiometer. Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
BDT 90.00
BDT 90.00 tax incl.
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 90.00 tax incl.
BDT 90.00 tax incl.
BDT 0.00 Tax
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 0.00 Tax
BDT 90.00 tax incl.
More
In Stock
In stock: 649

Reference: RBD-0145

YL-69 Soil Hygrometer Humidity & Soil Moisture Detection Sensor

(0)
Dual output mode, analog output more accurate A fixed bolt hole for easy installation With power indicator (red) and digital switching output indicator (green) Having LM393 comparator chip, stable. Operating Voltage: 3.3V~5V
BDT 120.00
BDT 120.00 tax incl.
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 120.00 tax incl.
BDT 120.00 tax incl.
BDT 0.00 Tax
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 0.00 Tax
BDT 120.00 tax incl.
More
In-Stock
In stock: 280

Reference: RBD-2199

NANO V3.0 Upgraded MH-Tiny ATTINY88 Micro Development Board 16MHz

(0)
Compatible with the Arduino IDE, making it easy for beginners to start using Smaller and cheaper than traditional Arduino boards Powered by a 16.0 MHz microcontroller Fully assembled except for headers, allowing for easy soldering Great for projects where size and cost are a concern Perfect for beginners to jump into electronics Can be used for a variety...
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 17

Reference: RBD-1081

Brand: Raspberry Pi Official

Raspberry Pi 5 Active Cooler

(0)
Original Raspberry Pi Product. Temperature-Controlled Fan, Delivers up to 1.4CFM of Air Flow. Comes With Aluminium Heat Sink Compatible With the Official Raspberry Pi 5 Case. Stock is available with Complete Set. Please purchase Raspberry Pi 5 Complete Set. 
BDT 740.00
BDT 740.00 tax incl.
BDT 740.00 tax excl.
BDT 740.00 tax excl.
BDT 740.00 tax incl.
BDT 740.00 tax incl.
BDT 0.00 Tax
BDT 740.00 tax excl.
BDT 740.00 tax excl.
BDT 0.00 Tax
BDT 740.00 tax incl.
In-Stock
In stock: 34

Reference: RBD-0557

30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Module For Arduino

(0)
Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD
BDT 2,750.00
BDT 2,750.00 tax incl.
BDT 2,750.00 tax excl.
BDT 2,750.00 tax excl.
BDT 2,750.00 tax incl.
BDT 2,750.00 tax incl.
BDT 0.00 Tax
BDT 2,750.00 tax excl.
BDT 2,750.00 tax excl.
BDT 0.00 Tax
BDT 2,750.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-0307

MLX90614 Contactless Temperature Sensor Module For Arduino

(0)
Operating Voltage(V): 3- 5 Operating Current(mA): 2 Communication protocol: I2C Power saving mode Automotive grad Small size, low cost. RoboticsBD
BDT 1,090.00
BDT 1,090.00 tax incl.
BDT 1,090.00 tax excl.
BDT 1,090.00 tax excl.
BDT 1,090.00 tax incl.
BDT 1,090.00 tax incl.
BDT 0.00 Tax
BDT 1,090.00 tax excl.
BDT 1,090.00 tax excl.
BDT 0.00 Tax
BDT 1,090.00 tax incl.
More
In-Stock
In stock: 21

Reference: RBD-0987

Arduino NANO I/O Extension Shield

(0)
Compatible with Arduino NANO All digital and analog pins breakout Compact size; External power supply current support Leads all pins out, convenient for wiring and doing experiments.
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 37

Reference: RBD-0872

Brand: Raspberry Pi Official

Raspberry Pi Zero 2 W

(0)
Raspberry Pi Zero 2 W: Your Incredibly Tiny Mini Compute The marvel of compact engineering, packing impressive power into an unbelievably small form factor. Ideal for DIY enthusiasts, hobbyists, and professionals alike, this mini-computer opens up a world of possibilities. Whether you're building smart home devices, creating IoT projects, or exploring...
BDT 5,199.00
BDT 5,199.00 tax incl.
BDT 5,199.00 tax excl.
BDT 5,199.00 tax excl.
BDT 5,199.00 tax incl.
BDT 5,199.00 tax incl.
BDT 0.00 Tax
BDT 5,199.00 tax excl.
BDT 5,199.00 tax excl.
BDT 0.00 Tax
BDT 5,199.00 tax incl.
More
In-Stock
In stock: 42

Reference: RBD-0573

DC 5V Stepper Motor with ULN2003 Driver Board 28BYJ-48

(0)
Rated voltage: 5V DC Reduction Ratio: 64:1 Step Angle: 5.625° /64 Frequency: 100Hz Self-positioning Torque: >34.3mN.m Friction torque: 600-1200 gf.cm Pull in torque: 300 gf.cm
BDT 199.00
BDT 199.00 tax incl.
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 199.00 tax incl.
BDT 199.00 tax incl.
BDT 0.00 Tax
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 0.00 Tax
BDT 199.00 tax incl.
More
In-Stock
In stock: 104

Reference: RBD-0353

0.96" Inch I2C OLED Display Yellow

(0)
Driver IC: SSD1306 Support wide voltage: 3.3V-5V DC Communication: IIC Working temperature: -30-80 degrees. RoboticsBD
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 22

Reference: RBD-0147

HR202 Humidity Detection Sensor Module

(0)
Adjustable Sensitivity, External GND. Detect Ambient Humidity. Provided with Fixed Bolt Hole, Convenient to Install. Power Indicator Light & Digital Output Indication Lamp. Using LM393 Chip for Stable Work. DO Small Digital Outputs Interface (0 & 1).
BDT 299.00
BDT 299.00 tax incl.
BDT 299.00 tax excl.
BDT 299.00 tax excl.
BDT 299.00 tax incl.
BDT 299.00 tax incl.
BDT 0.00 Tax
BDT 299.00 tax excl.
BDT 299.00 tax excl.
BDT 0.00 Tax
BDT 299.00 tax incl.
More
In-Stock
In stock: 99

Reference: RBD-2126

Arduino Micro R3

(0)
Manufacturer: China Support TWI and SPI communication Input voltage (recommended) range from 7V to 12V Input Voltage (limit) range from 6V to 20V 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs) Onboard ATmega32u4 microcontroller with 32KB flash memory, 2.5KB SRAM and 1KB EEPROM
BDT 1,380.00
BDT 1,380.00 tax incl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax incl.
BDT 1,380.00 tax incl.
BDT 0.00 Tax
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 0.00 Tax
BDT 1,380.00 tax incl.
More
In-Stock
In stock: 24

Reference: RBD-0662

EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino

(0)
Power supply: 7V to 30V. The higher the voltage, the higher the torque at high speeds. Adjustable current control from 150mA/phase to 750mA/phase. Logic voltage: 5V or 3.3V. A3967 microstepping driver. RoboticsBD
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-0384

MAX7219 Red Dot Matrix Module MCU Control Display Module DIY Kit For Arduino

(0)
Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 320 mA Display Dimensions: 32x32x6 (LxWxH) mm PCD Dimensions: 50×32 (LxW) mm Soldering is required
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 10

Reference: RBD-0151

Angle Sensor Module for Arduino SW-520D

(0)
Operating voltage 3.3V-12V A fixed bolt hole for easy installation Wide voltage LM393 comparator Maximum output current: 15mA Can work on low voltages
BDT 320.00
BDT 320.00 tax incl.
BDT 320.00 tax excl.
BDT 320.00 tax excl.
BDT 320.00 tax incl.
BDT 320.00 tax incl.
BDT 0.00 Tax
BDT 320.00 tax excl.
BDT 320.00 tax excl.
BDT 0.00 Tax
BDT 320.00 tax incl.
More
In-Stock
In stock: 51

Reference: RBD-2393

Brand: Raspberry Pi Official

Raspberry Pi Pico W with Soldered Headers

(0)
The Raspberry Pi Pico W builds upon the great cost-for-performance metrics of the Pico and add WiFi to the board. The Pico W features the same attributes as the Raspberry Pi Pico and also incorporates an Infineon CYW43439 wireless chip. CYW43439 supports IEEE 802.11 b/g/n wireless LAN, and Bluetooth® 5.2. (6/30/2022: Only Wireless LAN is supported on the...
BDT 1,549.00
BDT 1,549.00 tax incl.
BDT 1,549.00 tax excl.
BDT 1,549.00 tax excl.
BDT 1,549.00 tax incl.
BDT 1,549.00 tax incl.
BDT 0.00 Tax
BDT 1,549.00 tax excl.
BDT 1,549.00 tax excl.
BDT 0.00 Tax
BDT 1,549.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-0684

Motor Driver - Dual TB6612FNG (1A)

(0)
CW/CCW/short break/stop motor control modes Built-in thermal shutdown circuit and a low voltage detecting circuit Standby control to save power CW/CCW/short brake/stop motor control modes Operating Voltage(VDC): 15 Peak Current (A): 3.2 Continuous Current (A): 1.2 No. of Channels: 1
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-0155

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328 Circuit Operating Voltage: 5V Clock frequency: 16MHz. Digital I/O Pins: 14 8 analog input port: A0 ~ A7. A pair of TTL level serial port transceiver : RX / TX. 6 PWM port: D3, D5, D6, D9, D10, D11. Support serial download.
BDT 680.00
BDT 680.00 tax incl.
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 680.00 tax incl.
BDT 680.00 tax incl.
BDT 0.00 Tax
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 0.00 Tax
BDT 680.00 tax incl.
More
In-Stock
In stock: 88

Reference: RBD-0152

SW-420 NC Type Vibration Sensor Module

(0)
Using SW-420 normally closed type vibration sensor Comparator output, clean signal, good waveform, strong driving ability, >15mA Operating voltage 3.3V ~ 5V Output format: digital switching output (0 and 1) Using a wide voltage LM393 comparator With bolt holes for easy installation
BDT 90.00
BDT 90.00 tax incl.
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 90.00 tax incl.
BDT 90.00 tax incl.
BDT 0.00 Tax
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 0.00 Tax
BDT 90.00 tax incl.
More
In-Stock
In stock: 195

Reference: RBD-2386

Brand: Raspberry Pi Official

Raspberry Pi Pico W

(0)
The Raspberry Pi Pico W builds upon the great cost-for-performance metrics of the Pico and add WiFi to the board. The Pico W features the same attributes as the Raspberry Pi Pico and also incorporates an Infineon CYW43439 wireless chip. CYW43439 supports IEEE 802.11 b/g/n wireless LAN, and Bluetooth® 5.2. (6/30/2022: Only Wireless LAN is supported on the...
BDT 1,449.00
BDT 1,449.00 tax incl.
BDT 1,449.00 tax excl.
BDT 1,449.00 tax excl.
BDT 1,449.00 tax incl.
BDT 1,449.00 tax incl.
BDT 0.00 Tax
BDT 1,449.00 tax excl.
BDT 1,449.00 tax excl.
BDT 0.00 Tax
BDT 1,449.00 tax incl.
More
In stock
In stock: 117

Reference: RBD-1523

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328P Circuit Operating Voltage: 5V Clock frequency: 16MHz. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. A pair of TTL level serial port transceiver : RX / TX.
BDT 430.00
BDT 430.00 tax incl.
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 430.00 tax incl.
BDT 430.00 tax incl.
BDT 0.00 Tax
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 0.00 Tax
BDT 430.00 tax incl.
More
In-Stock
In stock: 25

Reference: RBD-0703

SSC-32 32Ch Servo Controller Lynxmotion Compatible

(0)
Controls up to 32 servo motors Comes preassembled USB interface (cable included), Xbee socket, and TTL serial Bidirectional communication with Query commands Large capacitors to prevent brownouts
BDT 3,400.00
BDT 3,400.00 tax incl.
BDT 3,400.00 tax excl.
BDT 3,400.00 tax excl.
BDT 3,400.00 tax incl.
BDT 3,400.00 tax incl.
BDT 0.00 Tax
BDT 3,400.00 tax excl.
BDT 3,400.00 tax excl.
BDT 0.00 Tax
BDT 3,400.00 tax incl.
More
In-Stock
In stock: 7

Reference: RBD-0401

LCD Module 8x2 Characters Display

(0)
Display: 8×2 character Outline: 58.0x32.0x10.0 VA: 37.8x16.0 Controller: SPLC780D Character: 2.96x5.56 Driver: 1/16
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 46

Reference: RBD-0156

TCS230 TCS3200 Color Sensor Recognition Module

(0)
Operating Voltage: 3V-5V High-resolution conversion of light intensity to frequency. Chip pins all has drawn for standard 100. Put the needle (2.54 mm). Mil-convenient for bitmap board. Programmable color and full-scale output frequency. Communicate directly with a microcontroller. Low-profile surface mount package.
BDT 515.00 BDT 550.00
BDT 550.00 BDT 515.00 tax incl.
BDT 550.00 BDT 515.00 tax excl.
BDT 550.00 BDT 515.00 tax excl.
BDT 550.00 BDT 515.00 tax incl.
BDT 550.00 BDT 515.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 550.00 BDT 515.00 tax excl.
BDT 550.00 BDT 515.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 550.00 BDT 515.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-1599

Brand: Raspberry Pi Official

Raspberry Pi Pico

(0)
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Temperature sensor
BDT 870.00 BDT 930.00
BDT 930.00 BDT 870.00 tax incl.
BDT 930.00 BDT 870.00 tax excl.
BDT 930.00 BDT 870.00 tax excl.
BDT 930.00 BDT 870.00 tax incl.
BDT 930.00 BDT 870.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 930.00 BDT 870.00 tax excl.
BDT 930.00 BDT 870.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 930.00 BDT 870.00 tax incl.
More
In-Stock
In stock: 116

Reference: RBD-0838

Arduino Pro Micro 5V/16MHz

(0)
ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD
BDT 870.00
BDT 870.00 tax incl.
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 870.00 tax incl.
BDT 870.00 tax incl.
BDT 0.00 Tax
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 0.00 Tax
BDT 870.00 tax incl.
More
In-Stock
In stock: 41

Reference: RBD-0742

Motor Driver 43A BTS7960

(0)
Input voltage(V): 6 – 27. Maximum current(A): 43. Input level(V): 3.3 – 5. Duty cycle: 0 – 100%. Path resistance: 16 mΩ at 25°C. Low quiescent current: 7 µA at 25°C.
BDT 670.00
BDT 670.00 tax incl.
BDT 670.00 tax excl.
BDT 670.00 tax excl.
BDT 670.00 tax incl.
BDT 670.00 tax incl.
BDT 0.00 Tax
BDT 670.00 tax excl.
BDT 670.00 tax excl.
BDT 0.00 Tax
BDT 670.00 tax incl.
More
In-Stock
In stock: 44

Reference: RBD-0661

Standard LCD 16x2 Display Yellow Backlight

(0)
For Standard LCD 16x2 with Male Header. Press here For Standard LCD 16x2 with Female Header. Press here For Standard LCD 16x2 with I2C adapter board soldered. Press here. For Standard LCD 16x2 with White Background. Press here. For Standard LCD 16x2 with Blue Background. Press here.
BDT 240.00
BDT 240.00 tax incl.
BDT 240.00 tax excl.
BDT 240.00 tax excl.
BDT 240.00 tax incl.
BDT 240.00 tax incl.
BDT 0.00 Tax
BDT 240.00 tax excl.
BDT 240.00 tax excl.
BDT 0.00 Tax
BDT 240.00 tax incl.
More
In-Stock
In stock: 307

Reference: RBD-0222

35mm Piezo Ceramic Elements Sound Sensor

(0)
Sound pressure level: 85DB 10cm The input voltage: 30vp-p max Ultra-thin and lightweight Low power consumption for voltage type Operating Temperature: -20~70 Storage Temperature: -30-80 Clear sound
BDT 50.00 BDT 65.00
BDT 65.00 BDT 50.00 tax incl.
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax incl.
BDT 65.00 BDT 50.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 65.00 BDT 50.00 tax incl.
More
In-Stock
In stock: 387

Reference: RBD-2053

Arduino Pro Micro 5V/16MHz Type-C

(0)
ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD
BDT 755.00
BDT 755.00 tax incl.
BDT 755.00 tax excl.
BDT 755.00 tax excl.
BDT 755.00 tax incl.
BDT 755.00 tax incl.
BDT 0.00 Tax
BDT 755.00 tax excl.
BDT 755.00 tax excl.
BDT 0.00 Tax
BDT 755.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-2012

Brand: Raspberry Pi Official

Raspberry Pi Pico With Soldered Headers

(0)
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Onboard temperature sensor
BDT 970.00 BDT 1,070.00
BDT 1,070.00 BDT 970.00 tax incl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax incl.
BDT 1,070.00 BDT 970.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 1,070.00 BDT 970.00 tax incl.
More
In-Stock
In stock: 6

Follow us on Facebook