Home

Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 5.00 - BDT 204,035.00

Categories

Categories

Brand

Brand

Weight

Weight

  • 0 kg - 28,800 kg

Resistor Pack of 5

Resistor Pack of 5

  • Banner

Active filters
  • Categories: 3D Printed
  • Categories: 3D Printer
  • Categories: Back in Stock
  • Categories: Enclosure
  • Categories: Motor Driver
  • Categories: Orange Pi
W5100 Ethernet Network Module for Arduino Robotics Bangladesh Quick view

Reference: RBD-2488

W5100 Ethernet Network Module for Arduino

(0)
Support Hardwired TCP/IP Protocols: TCP, UDP, ICMP, IPv4 ARP, IGMP, PPPoE, Ethernet 10BaseT/100BaseTX Ethernet PHY embedded Auto-Negotiation (Full-duplex and half duplex) Support Auto MDI/MDIX Simultaneously Supports to 4 independent sockets 0.18 µm CMOS technology 3.3V operation with 5V I/O signal tolerance Provide Serial Peripheral Interface (SPI MODE...
BDT 910.00
BDT 910.00 tax incl.
BDT 910.00 tax excl.
BDT 910.00 tax excl.
BDT 910.00 tax incl.
BDT 910.00 tax incl.
BDT 0.00 Tax
BDT 910.00 tax excl.
BDT 910.00 tax excl.
BDT 0.00 Tax
BDT 910.00 tax incl.
More
In stock
In stock: 40
Raspberry Pi Zero Official Case with GPIO and Camera Hole for Raspberry Pi Zero & Zero W Robotics Bangladesh Quick view

Reference: RBD-1413

Brand: Raspberry Pi Official

Raspberry Pi Zero Official Case with GPIO and Camera Hole for Raspberry Pi Zero & Zero W

(0)
Material: ABS- 3 different cover board- Color: White & Red- Use For: Raspberry Pi Zero V1.3 and Raspberry Pi Zero W- Camera Cable Length: 37mm
BDT 330.00
BDT 330.00 tax incl.
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 330.00 tax incl.
BDT 330.00 tax incl.
BDT 0.00 Tax
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 0.00 Tax
BDT 330.00 tax incl.
More
In-Stock
In stock: 15
Out-of-Stock Anycubic Photon Zero Resin 3D Printer Robotics Bangladesh Quick view

Reference: 1375

Brand: Anycubic

Anycubic Photon Zero Resin 3D Printer

(0)
Technique: LCD-based SLA Printing Speed: 30mm(H)/hour Power: 30W
BDT 36,990.00
BDT 36,990.00 tax incl.
BDT 36,990.00 tax excl.
BDT 36,990.00 tax excl.
BDT 36,990.00 tax incl.
BDT 36,990.00 tax incl.
BDT 0.00 Tax
BDT 36,990.00 tax excl.
BDT 36,990.00 tax excl.
BDT 0.00 Tax
BDT 36,990.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Holder for 10 mm LED light strip Robotics Bangladesh Quick view

Reference: RBD-1364

Holder for 10 mm LED light strip

(0)
10 mm LED light strips. Attached with a nail or a screw.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
Out-of-Stock
In stock: -2
Ardumoto Shield L298P Motor Driver Robotics Bangladesh Quick view

Reference: RBD-0392

Ardumoto Shield L298P Motor Driver

(0)
L298P based Arduino motor driver shield Forward, Backward steering indicators Can Drive 2 DC Motors Up to 2A of Maximum Current. RoboticsBD
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 13
Back to Back 4S AA Battery Holder Robotics Bangladesh Quick view

Reference: RBD-1692

Back to Back 4S AA Battery Holder

(0)
Color: Black lightweight Convenient to carry this battery box holder with wires Weight: About 9g Wire Length: Approx 14cm
BDT 160.00
BDT 160.00 tax incl.
BDT 160.00 tax excl.
BDT 160.00 tax excl.
BDT 160.00 tax incl.
BDT 160.00 tax incl.
BDT 0.00 Tax
BDT 160.00 tax excl.
BDT 160.00 tax excl.
BDT 0.00 Tax
BDT 160.00 tax incl.
More
In-Stock
In stock: 35
Out-of-Stock ABS Filament 1.75mm Plastic For 3D Printer 1kg/Roll Robotics Bangladesh Quick view

Reference: 1316

ABS Filament 1.75mm Plastic For 3D Printer 1kg/Roll

(0)
Tougher and stronger Less warping (about 0.4% compared to over 8% in regular ABS) Prints smoother & smoother printed objects Better scratch, heat and oil resistance Can be polished using acetone Can be easily colored.
BDT 2,895.00
BDT 2,895.00 tax incl.
BDT 2,895.00 tax excl.
BDT 2,895.00 tax excl.
BDT 2,895.00 tax incl.
BDT 2,895.00 tax incl.
BDT 0.00 Tax
BDT 2,895.00 tax excl.
BDT 2,895.00 tax excl.
BDT 0.00 Tax
BDT 2,895.00 tax incl.
More
Out-of-Stock
In stock: 0
Black
DRV8825 Stepper Motor Driver Module Quick view

Reference: RBD-0434

DRV8825 Stepper Motor Driver Module

(0)
Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm. RoboticsBD
BDT 230.00
BDT 230.00 tax incl.
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 230.00 tax incl.
BDT 230.00 tax incl.
BDT 0.00 Tax
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 0.00 Tax
BDT 230.00 tax incl.
More
Last items in stock
In stock: 2
10 X 1.5V AA Back to Back Plastic Battery Holder with Wire Robotics Bangladesh Quick view

Reference: RBD-1742

10 X 1.5V AA Back to Back Plastic Battery Holder with Wire

(0)
Holds 10 x AA batteries Easy install, convenient to use. Dimensions mm (LxWxH): 78X 60 X 28 Weight: 27.4 gm Material: Plastic Internal Connection: Series
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 53
PLA Filament 1.75mm Plastic For 3D Printer 1kg/Roll Robotics Bangladesh Quick view

Reference: RBD-1315

PLA Filament 1.75mm Plastic For 3D Printer 1kg/Roll

(0)
Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved
BDT 2,650.00
BDT 2,650.00 tax incl.
BDT 2,650.00 tax excl.
BDT 2,650.00 tax excl.
BDT 2,650.00 tax incl.
BDT 2,650.00 tax incl.
BDT 0.00 Tax
BDT 2,650.00 tax excl.
BDT 2,650.00 tax excl.
BDT 0.00 Tax
BDT 2,650.00 tax incl.
More
In-Stock
In stock: 13
Yellow Red Black Blue Gray White
A4988 StepStick Stepper Motor Driver Module Quick view

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

(0)
Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 65
Jumper Wire housing 3 Pin Robotics Bangladesh Quick view

Reference: RBD-0251

Jumper Wire housing 3 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 3 jumper wires (3-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 9
Out-of-Stock Tuya 7in1 WiFi Air Quality Monitor PM2.5 CO2 TVOC HCHO AQI Robotics Bangladesh Quick view

Reference: RBD-2550

Tuya 7in1 WiFi Air Quality Monitor PM2.5 CO2 TVOC HCHO AQI

(0)
This multi-functional air quality monitor offers simultaneous testing for PM2.5, CO2, TVOC, HCHO, AQI, temperature, and humidity. Featuring a 2.8-inch TFT color display, it provides clear and easy-to-read detection data. Additionally, the monitor can be connected to the Tuya App for real-time air quality monitoring and historical data trend analysis...
BDT 6,450.00
BDT 6,450.00 tax incl.
BDT 6,450.00 tax excl.
BDT 6,450.00 tax excl.
BDT 6,450.00 tax incl.
BDT 6,450.00 tax incl.
BDT 0.00 Tax
BDT 6,450.00 tax excl.
BDT 6,450.00 tax excl.
BDT 0.00 Tax
BDT 6,450.00 tax incl.
More
Out-of-Stock
In stock: 0
6 x AA Battery Holder Box (Back-to-Back) Robotics Bangladesh Quick view

Reference: RBD-1743

6 x AA Battery Holder Box (Back-to-Back)

(0)
Holds 6 x AA batteries Easy install, convenient to use. Dimensions mm (LxWxH): 58X 48 X 28 Weight: 15.6 gm Material: Plastic Internal Connection: Series
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In-Stock
In stock: 30
Out-of-Stock Flexible TPU Filament Plastic For 3D Printer 1. Quick view

Reference: 1391

Flexible TPU Filament Plastic For 3D Printer 1.75mm1KG/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 3,540.00
BDT 3,540.00 tax incl.
BDT 3,540.00 tax excl.
BDT 3,540.00 tax excl.
BDT 3,540.00 tax incl.
BDT 3,540.00 tax incl.
BDT 0.00 Tax
BDT 3,540.00 tax excl.
BDT 3,540.00 tax excl.
BDT 0.00 Tax
BDT 3,540.00 tax incl.
More
Out-of-Stock
In stock: -10
Red White
30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Shield module For Arduino Quick view

Reference: RBD-0557

30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Module For Arduino

(0)
Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD
BDT 2,750.00
BDT 2,750.00 tax incl.
BDT 2,750.00 tax excl.
BDT 2,750.00 tax excl.
BDT 2,750.00 tax incl.
BDT 2,750.00 tax incl.
BDT 0.00 Tax
BDT 2,750.00 tax excl.
BDT 2,750.00 tax excl.
BDT 0.00 Tax
BDT 2,750.00 tax incl.
More
In-Stock
In stock: 4
Jumper Wire housing 5 Pin Robotics Bangladesh Quick view

Reference: RBD-0260

Jumper Wire housing 5 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 5 jumper wires (5-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 9
Out-of-Stock Argon ONE M.2 Case for Raspberry Pi 4 Robotics Bangladesh Quick view

Reference: RBD-1828

Argon ONE M.2 Case for Raspberry Pi 4

(0)
Sleek aluminum alloy enclosure Plastic base for excellent Wi-Fi signal strength Easy installation with magnetic removable top Easily accessible GPIO with color-coded pinouts M.2 SATA SSD NOT INCLUDED
BDT 6,990.00
BDT 6,990.00 tax incl.
BDT 6,990.00 tax excl.
BDT 6,990.00 tax excl.
BDT 6,990.00 tax incl.
BDT 6,990.00 tax incl.
BDT 0.00 Tax
BDT 6,990.00 tax excl.
BDT 6,990.00 tax excl.
BDT 0.00 Tax
BDT 6,990.00 tax incl.
More
Out-of-Stock
In stock: -7
A2212 1400KV Brushless Outrunner BLDC Motor Robotics Bangladesh Quick view

Reference: RBD-1542

A2212 1400KV Brushless Outrunner BLDC Motor

(0)
Model: A2212/10T Motor KV: 1400 Max. Efficiency Current: 6-12A No Load Current: 0.7A @10V Current Capacity: 16A/60S LiPO Batteries: 2S-3S
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
In-Stock
In stock: 37
Out-of-Stock PETG Filament Plastic For 3D Printer 1. Quick view

Reference: 1392

PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll

(0)
PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll Compatible with Anycubic, Creality. Temperature: 205-230 °C Bed Temperature: 60-80 °C
BDT 3,640.00
BDT 3,640.00 tax incl.
BDT 3,640.00 tax excl.
BDT 3,640.00 tax excl.
BDT 3,640.00 tax incl.
BDT 3,640.00 tax incl.
BDT 0.00 Tax
BDT 3,640.00 tax excl.
BDT 3,640.00 tax excl.
BDT 0.00 Tax
BDT 3,640.00 tax incl.
More
Out-of-Stock
In stock: 0
Red Black Blue White
DC 5V Stepper Motor + ULN2003 Driver Board (28BYJ-48) for Arduino Quick view

Reference: RBD-0573

DC 5V Stepper Motor with ULN2003 Driver Board 28BYJ-48

(0)
Rated voltage: 5V DC Reduction Ratio: 64:1 Step Angle: 5.625° /64 Frequency: 100Hz Self-positioning Torque: >34.3mN.m Friction torque: 600-1200 gf.cm Pull in torque: 300 gf.cm
BDT 199.00
BDT 199.00 tax incl.
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 199.00 tax incl.
BDT 199.00 tax incl.
BDT 0.00 Tax
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 0.00 Tax
BDT 199.00 tax incl.
More
In-Stock
In stock: 104
Jumper Wire housing 6 Pin Robotics Bangladesh Quick view

Reference: RBD-0262

Jumper Wire housing 6 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 6 jumper wires (6-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 5
Thermoelectric Peltier Refrigeration Cooling System DIY Kit Robotics Bangladesh Quick view

Reference: RBD-2159

Thermoelectric Peltier Refrigeration Cooling System DIY Kit

(0)
Using GL style of the refrigerator, effectively release the thermal deformation ability of the refrigerator produce at work. Small volume, does not occupy space, installation is simple. It can be used as a Pet Air Conditioner (chicken, little dog, etc.) or a little fridge. Lightweight, small size and easier to install. The kit does not include...
BDT 1,190.00
BDT 1,190.00 tax incl.
BDT 1,190.00 tax excl.
BDT 1,190.00 tax excl.
BDT 1,190.00 tax incl.
BDT 1,190.00 tax incl.
BDT 0.00 Tax
BDT 1,190.00 tax excl.
BDT 1,190.00 tax excl.
BDT 0.00 Tax
BDT 1,190.00 tax incl.
More
In-Stock
In stock: 17
Out-of-Stock TPU Filament Plastic For 3D Printer 1. Quick view

Reference: 1317

TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 2,300.00
BDT 2,300.00 tax incl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax incl.
BDT 2,300.00 tax incl.
BDT 0.00 Tax
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 0.00 Tax
BDT 2,300.00 tax incl.
More
Out-of-Stock
In stock: -9
Black White
EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino Quick view

Reference: RBD-0662

EasyDriver Shield Stepper Motor Driver V44 A3967 For Arduino

(0)
Power supply: 7V to 30V. The higher the voltage, the higher the torque at high speeds. Adjustable current control from 150mA/phase to 750mA/phase. Logic voltage: 5V or 3.3V. A3967 microstepping driver. RoboticsBD
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 11
Jumper Wire housing 7 Pin Robotics Bangladesh Quick view

Reference: RBD-0263

Jumper Wire housing 7 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 7 jumper wires (7-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 5
10x1 mm Thin Strong Neodymium Magnet Robotics Bangladesh Quick view

Reference: RBD-1746

Neodymium Disc Magnet N35 - 10 x 1 mm

(0)
Neodymium Magnet Shape: Disc Actual Size - 10 x 1 mm Note: Magnet size may deviate by up to 5%. If you require precise dimensions, please contact our customer support for exact measurements.
BDT 15.00
BDT 15.00 tax incl.
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 15.00 tax incl.
BDT 15.00 tax incl.
BDT 0.00 Tax
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 0.00 Tax
BDT 15.00 tax incl.
More
In-Stock
In stock: 430
Out-of-Stock Colored UV Resin 500mL Black Robotics Bangladesh Quick view

Reference: RBD-1386

Brand: Anycubic

Colored UV Resin 500mL Black

(0)
Wavelength(nm): 395-405 Color: Black Density(g/m^3): 1.08-1.13 Hardness(Shore D):79.0 Tensile Strength(MPa): 46-67 Elongation at Break(%):28-35
BDT 2,990.00
BDT 2,990.00 tax incl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax incl.
BDT 2,990.00 tax incl.
BDT 0.00 Tax
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 0.00 Tax
BDT 2,990.00 tax incl.
More
Out-of-Stock
In stock: 0
Motor Driver - Dual TB6612FNG (1A) Robotics Bangladesh Quick view

Reference: RBD-0684

Motor Driver - Dual TB6612FNG (1A)

(0)
CW/CCW/short break/stop motor control modes Built-in thermal shutdown circuit and a low voltage detecting circuit Standby control to save power CW/CCW/short brake/stop motor control modes Operating Voltage(VDC): 15 Peak Current (A): 3.2 Continuous Current (A): 1.2 No. of Channels: 1
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 16
- BDT 20.00 Reduced price Arduino Uno R3 Bumper Robotics Bangladesh Quick view

Reference: RBD-0286

Arduino Uno R3 Bumper

(0)
3D Printed Arduino Uno R3 Bumper or base.Short Circuit Prevention: Safeguard your microcontroller against the risk of short circuits when placing it on a flat conductive surface. The bumper acts as a protective barrier, reducing the chances of accidental electrical contact. Note: Arduino Uno is not included
BDT 30.00 BDT 50.00
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax incl.
More
In stock
In stock: 14
Jumper Wire housing 8 Pin Robotics Bangladesh Quick view

Reference: RBD-0269

Jumper Wire housing 8 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 8 jumper wires (8-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 8
Back to top

Follow us on Facebook

Facebook