• Banner

Active filters
  • Categories: Arduino Boards
  • Categories: Enclosure
  • Categories: Motor
  • Categories: Raspberry Pi
  • Categories: RFID/ NFC
  • Categories: Robots
  • Categories: Solenoid/Lock/Actuator

Reference: RBD-1397

Arduino Mega 2560 CH340

(0)
Programmer: CH340 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader
BDT 1,345.00
BDT 1,345.00 tax incl.
BDT 1,345.00 tax excl.
BDT 1,345.00 tax excl.
BDT 1,345.00 tax incl.
BDT 1,345.00 tax incl.
BDT 0.00 Tax
BDT 1,345.00 tax excl.
BDT 1,345.00 tax excl.
BDT 0.00 Tax
BDT 1,345.00 tax incl.
More
In-Stock
In stock: 65

Reference: RBD-0915

UART EM4100 RFID Card Reader RDM6300

(0)
Maximum effective distance up to 150mm Less than 100ms decoding time Support external antenna Uart interface Support EM4100 compatible read-only or read/write tags Small outline design
BDT 415.00
BDT 415.00 tax incl.
BDT 415.00 tax excl.
BDT 415.00 tax excl.
BDT 415.00 tax incl.
BDT 415.00 tax incl.
BDT 0.00 Tax
BDT 415.00 tax excl.
BDT 415.00 tax excl.
BDT 0.00 Tax
BDT 415.00 tax incl.
More
In-Stock
In stock: 58

Reference: RBD-0020

Servo Motor Micro SG90 180 Degree Rotation

(0)
Model: SG90 Weight: 9 gm Operating voltage: 3.0V~ 7.2V Servo Plug: JR Stall torque @4.8V : 1.2kg-cm Stall torque @6.6V : 1.6kg-cm Note: Product images/ Components brand may vary from actual product as our stock rotates.
BDT 149.00
BDT 149.00 tax incl.
BDT 149.00 tax excl.
BDT 149.00 tax excl.
BDT 149.00 tax incl.
BDT 149.00 tax incl.
BDT 0.00 Tax
BDT 149.00 tax excl.
BDT 149.00 tax excl.
BDT 0.00 Tax
BDT 149.00 tax incl.
More
In-Stock
In stock: 417

Reference: RBD-2251

BALA-C PLUS ESP32 Self-Balancing Robot Kit

(0)
ESP32-Pico-D4: 240MHz dual-core, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth Servo Rotation angle: 360 °; no-load speed: 0.12 seconds / 60 degrees (4.8V) Driver: L9110S Slave: STM32F030F4P6 Communication protocol I2C: 0x38
BDT 8,350.00 BDT 9,850.00
BDT 9,850.00 BDT 8,350.00 tax incl.
BDT 9,850.00 BDT 8,350.00 tax excl.
BDT 9,850.00 BDT 8,350.00 tax excl.
BDT 9,850.00 BDT 8,350.00 tax incl.
BDT 9,850.00 BDT 8,350.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 9,850.00 BDT 8,350.00 tax excl.
BDT 9,850.00 BDT 8,350.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 9,850.00 BDT 8,350.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-1680

Electric Bolt Lock 12V DC

(0)
Electric Bolt Lock 12VDC Ultra-Low Power Design, More Durable and more environmentally friendly. 500,000 times power lock durability High strength aluminum lock body, stainless steel bolt.
BDT 2,980.00
BDT 2,980.00 tax incl.
BDT 2,980.00 tax excl.
BDT 2,980.00 tax excl.
BDT 2,980.00 tax incl.
BDT 2,980.00 tax incl.
BDT 0.00 Tax
BDT 2,980.00 tax excl.
BDT 2,980.00 tax excl.
BDT 0.00 Tax
BDT 2,980.00 tax incl.
More
In-Stock
In stock: 18

Reference: RBD-1519

Brand: Raspberry Pi Official

Raspberry Pi 400 4GB RAM

(0)
Quad-Core 64-bit Broadcom 2711, Cortex A72  Processor WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz) LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0) Operating Power 5V@3A  via USB Type-C port. Keyboard Layout: US Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p Built-in Raspberry Pi Official Keyboard
BDT 14,140.00 BDT 15,299.00
BDT 15,299.00 BDT 14,140.00 tax incl.
BDT 15,299.00 BDT 14,140.00 tax excl.
BDT 15,299.00 BDT 14,140.00 tax excl.
BDT 15,299.00 BDT 14,140.00 tax incl.
BDT 15,299.00 BDT 14,140.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 15,299.00 BDT 14,140.00 tax excl.
BDT 15,299.00 BDT 14,140.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 15,299.00 BDT 14,140.00 tax incl.
More
In-Stock
In stock: 49

Reference: RBD-1214

Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU

(0)
The board is compatible with Mega 2560.  excellent solution for developing projects based on ATmega2560. The board can be powered directly through the Micro USB connector The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.
BDT 1,590.00
BDT 1,590.00 tax incl.
BDT 1,590.00 tax excl.
BDT 1,590.00 tax excl.
BDT 1,590.00 tax incl.
BDT 1,590.00 tax incl.
BDT 0.00 Tax
BDT 1,590.00 tax excl.
BDT 1,590.00 tax excl.
BDT 0.00 Tax
BDT 1,590.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-1099

EM4100 125kHz Printable RFID Card

(0)
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 1 to 5 cm (Depending on Antenna Geometry) Operating frequency: 125KHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anti-collision Printable Package Content: 1x Card
BDT 24.00
BDT 24.00 tax incl.
BDT 24.00 tax excl.
BDT 24.00 tax excl.
BDT 24.00 tax incl.
BDT 24.00 tax incl.
BDT 0.00 Tax
BDT 24.00 tax excl.
BDT 24.00 tax excl.
BDT 0.00 Tax
BDT 24.00 tax incl.
More
In-Stock
In stock: 804

Reference: RBD-0034

Servo Motor MG996R 180 Degree Rotation

(0)
Weight: 55g Dimension: 40.7×19.7×42.9mm Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v) Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v) Operating voltage: 4.8 ~ 6.6V Gear Type: Metal gear Dead band width: 1us Wire length: 32cm
BDT 445.00
BDT 445.00 tax incl.
BDT 445.00 tax excl.
BDT 445.00 tax excl.
BDT 445.00 tax incl.
BDT 445.00 tax incl.
BDT 0.00 Tax
BDT 445.00 tax excl.
BDT 445.00 tax excl.
BDT 0.00 Tax
BDT 445.00 tax incl.
More
In-Stock
In stock: 165

Reference: RBD-2469

Brass Liquid Solenoid Valve - 12V - 1/2 NPS

(0)
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening, aquarium, or pool project. There are two 1/2" (Nominal NPS) outlets. Normally, the valve is closed. When 12VDC is applied to the two terminals, the valve opens and water can flow. Unlike the plastic solenoid valve, this one does...
BDT 2,650.00 BDT 3,350.00
BDT 3,350.00 BDT 2,650.00 tax incl.
BDT 3,350.00 BDT 2,650.00 tax excl.
BDT 3,350.00 BDT 2,650.00 tax excl.
BDT 3,350.00 BDT 2,650.00 tax incl.
BDT 3,350.00 BDT 2,650.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 3,350.00 BDT 2,650.00 tax excl.
BDT 3,350.00 BDT 2,650.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 3,350.00 BDT 2,650.00 tax incl.
More
In stock
In stock: 5

Reference: RBD-2439

Brand: Raspberry Pi Official

Raspberry Pi 5 8GB

(0)
Model: Raspberry Pi 5 Model 8GB Ram: LPDDR4X-4267 8GB  SDRAM PCIe 2.0 x1 interface for fast peripherals 5V/5A DC power (PD enabled) Real-Time Clock (RTC), powered by an external battery On-board power button!! Stock is available with Complete Set. Please purchase Raspberry Pi 5 Complete Set. 
BDT 15,550.00
BDT 15,550.00 tax incl.
BDT 15,550.00 tax excl.
BDT 15,550.00 tax excl.
BDT 15,550.00 tax incl.
BDT 15,550.00 tax incl.
BDT 0.00 Tax
BDT 15,550.00 tax excl.
BDT 15,550.00 tax excl.
BDT 0.00 Tax
BDT 15,550.00 tax incl.
In-Stock
In stock: 45

Reference: RBD-1817

RFID/ NFC Card Reader USB - 13.56Mhz

(0)
USB Plug and Play. RFID reader 0-8cm Reading Distance. Win8/7/XP/Android Supported. S50/S70 Card Supported. OTG Phone Connection. Built-in buzzer and LED for identification.
BDT 1,310.00
BDT 1,310.00 tax incl.
BDT 1,310.00 tax excl.
BDT 1,310.00 tax excl.
BDT 1,310.00 tax incl.
BDT 1,310.00 tax incl.
BDT 0.00 Tax
BDT 1,310.00 tax excl.
BDT 1,310.00 tax excl.
BDT 0.00 Tax
BDT 1,310.00 tax incl.
More
In-Stock
In stock: 32

Reference: RBD-1692

Back to Back 4S AA Battery Holder

(0)
Color: Black lightweight Convenient to carry this battery box holder with wires Weight: About 9g Wire Length: Approx 14cm
BDT 160.00
BDT 160.00 tax incl.
BDT 160.00 tax excl.
BDT 160.00 tax excl.
BDT 160.00 tax incl.
BDT 160.00 tax incl.
BDT 0.00 Tax
BDT 160.00 tax excl.
BDT 160.00 tax excl.
BDT 0.00 Tax
BDT 160.00 tax incl.
More
In-Stock
In stock: 35

Reference: RBD-1254

XiaoR STM32 Self Balancing Programmable Robot

(0)
Size: 202X85X200mm Weight: 1150 gram MCU: STM32F105 Motor Drive: LV8731 motor driver chip Charging Direct
BDT 19,990.00
BDT 19,990.00 tax incl.
BDT 19,990.00 tax excl.
BDT 19,990.00 tax excl.
BDT 19,990.00 tax incl.
BDT 19,990.00 tax incl.
BDT 0.00 Tax
BDT 19,990.00 tax excl.
BDT 19,990.00 tax excl.
BDT 0.00 Tax
BDT 19,990.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-0295

Servo Motor MG995 360 Degree Continuous Rotation

(0)
Model: MG995 Weight: 55 gm Operating voltage: 4.8V~ 7.2V Servo Plug: JR Stall torque @4.8V : 9.4kg-cm Stall torque @6.6V : 11kg-cm Continuous rotation servos are like regular hobby RC servos but modified to offer speed control instead of position control. They're essentially compact, affordable motors with integrated motor drivers. Add a wheel, and...
BDT 770.00
BDT 770.00 tax incl.
BDT 770.00 tax excl.
BDT 770.00 tax excl.
BDT 770.00 tax incl.
BDT 770.00 tax incl.
BDT 0.00 Tax
BDT 770.00 tax excl.
BDT 770.00 tax excl.
BDT 0.00 Tax
BDT 770.00 tax incl.
More
In-Stock
In stock: 62

Reference: RBD-0032

Arduino Nano

(0)
USB Driver: CH340 Operating Voltage (logic level): 5V With Mini USB 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please select...
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In-Stock
In stock: 549

Reference: RBD-2513

5V Electromagnet - 25 Kg Holding Force - P40/20

(0)
Nominal Voltage: 5V DC Current Draw: 0.6 Amps at 5V Holding Force: 25 Kg / 55 lb Approximate Pickup Weight: 5 KgEver wanted to feel like Magneto? Well, now you sort of can! Bring the ferromagnetic objects in the world under your control with an Electromagnet The simplest way to make an electromagnet is to get a solenoid, pass some current through it, and...
BDT 1,350.00
BDT 1,350.00 tax incl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax incl.
BDT 1,350.00 tax incl.
BDT 0.00 Tax
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 0.00 Tax
BDT 1,350.00 tax incl.
More
In stock
In stock: 7

Reference: RBD-2438

Brand: Raspberry Pi Official

Raspberry Pi 5 4GB

(0)
Model: Raspberry Pi 5 Model 4GB Ram: LPDDR4X-4267 4GB  SDRAM PCIe 2.0 x1 interface for fast peripherals 5V/5A DC power (PD enabled) Real-Time Clock (RTC), powered by an external battery On-board power button!! Stock is available with Total Set. Please purchase Raspberry Pi 5 Complete Set. 
BDT 14,100.00
BDT 14,100.00 tax incl.
BDT 14,100.00 tax excl.
BDT 14,100.00 tax excl.
BDT 14,100.00 tax incl.
BDT 14,100.00 tax incl.
BDT 0.00 Tax
BDT 14,100.00 tax excl.
BDT 14,100.00 tax excl.
BDT 0.00 Tax
BDT 14,100.00 tax incl.
In-Stock
In stock: 8

Reference: RBD-1950

RFID Module RC522 Mini Kits S50 13.56 Mhz With Tags

(0)
Card reader MF522-MINI module uses the  RC522 original chip to design the  Supply Voltage 3.3V Works at a 13.56MHz frequency
BDT 230.00
BDT 230.00 tax incl.
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 230.00 tax incl.
BDT 230.00 tax incl.
BDT 0.00 Tax
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 0.00 Tax
BDT 230.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-1742

10 X 1.5V AA Back to Back Plastic Battery Holder with Wire

(0)
Holds 10 x AA batteries Easy install, convenient to use. Dimensions mm (LxWxH): 78X 60 X 28 Weight: 27.4 gm Material: Plastic Internal Connection: Series
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 53

Reference: RBD-1253

Wuli bot Programmable Robot

(0)
Program Software: Mixly + XR Scratch(base on Scratch2.0) Input: Edge sensor, Button, IR receiver module, Ultrasonic sensor, Tracking sensor Output: Buzzer, RGBLED, Two motor port,OLED CPU: Arduino UNO R3 Power: 2Pcs 3.7V DC Lithium battery Control: WiFi control/IR remote
BDT 17,990.00
BDT 17,990.00 tax incl.
BDT 17,990.00 tax excl.
BDT 17,990.00 tax excl.
BDT 17,990.00 tax incl.
BDT 17,990.00 tax incl.
BDT 0.00 Tax
BDT 17,990.00 tax excl.
BDT 17,990.00 tax excl.
BDT 0.00 Tax
BDT 17,990.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-0926

Arduino Nano R3

(0)
USB Driver: FT232 Manufacturer: Gravitech Operating Voltage (logic level): 5V 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please...
BDT 690.00
BDT 690.00 tax incl.
BDT 690.00 tax excl.
BDT 690.00 tax excl.
BDT 690.00 tax incl.
BDT 690.00 tax incl.
BDT 0.00 Tax
BDT 690.00 tax excl.
BDT 690.00 tax excl.
BDT 0.00 Tax
BDT 690.00 tax incl.
More
In-Stock
In stock: 32

Reference: RBD-0297

Analog Feedback Servo MG996R

(0)
Weight: 55g Dimension: 40.7×19.7×42.9mm Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v) Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v) Operating voltage: 4.8 ~ 6.6V Gear Type: Metal gear Dead band width: 1us Wire length: 32cm
BDT 1,200.00
BDT 1,200.00 tax incl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax incl.
BDT 1,200.00 tax incl.
BDT 0.00 Tax
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 0.00 Tax
BDT 1,200.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-2514

5V Electromagnet - 10 Kg Holding Force - P30/22

(0)
Nominal Voltage: 5V DC Current Draw: 0.6 Amps at 5V Holding Force: 10 Kg / 22 lb Approximate Pickup Weight: 2 Kg / 4 lbEver wanted to feel like Magneto? Well, now you sort of can! Bring the ferromagnetic objects in the world under your control with an Electromagnet The simplest way to make an electromagnet is to get a solenoid, pass some current through...
BDT 1,020.00
BDT 1,020.00 tax incl.
BDT 1,020.00 tax excl.
BDT 1,020.00 tax excl.
BDT 1,020.00 tax incl.
BDT 1,020.00 tax incl.
BDT 0.00 Tax
BDT 1,020.00 tax excl.
BDT 1,020.00 tax excl.
BDT 0.00 Tax
BDT 1,020.00 tax incl.
More
In stock
In stock: 9

Reference: RBD-2281

13.56MHz RFID IC Key Tag

(0)
Material: ABS Dimension(LxWxH): 43.7×30.5×5.3mm Response Frequency: 13.56MHz Chip type: FM1108 Fudan Chip Memory capacity: 8 kbit Designed for the RFID 13.56MHz duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 149

Reference: RBD-2199

NANO V3.0 Upgraded MH-Tiny ATTINY88 Micro Development Board 16MHz

(0)
Compatible with the Arduino IDE, making it easy for beginners to start using Smaller and cheaper than traditional Arduino boards Powered by a 16.0 MHz microcontroller Fully assembled except for headers, allowing for easy soldering Great for projects where size and cost are a concern Perfect for beginners to jump into electronics Can be used for a variety...
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 17

Reference: RBD-1743

6 x AA Battery Holder Box (Back-to-Back)

(0)
Holds 6 x AA batteries Easy install, convenient to use. Dimensions mm (LxWxH): 58X 48 X 28 Weight: 15.6 gm Material: Plastic Internal Connection: Series
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In-Stock
In stock: 30

Reference: RBD-1129

Brand: RoboticsBD

Otto Bot Complete

(0)
Complete Assembled  Plug and Play Open Source Design Compatible With Arduino IDE DIY Kit
BDT 7,890.00 BDT 8,890.00
BDT 8,890.00 BDT 7,890.00 tax incl.
BDT 8,890.00 BDT 7,890.00 tax excl.
BDT 8,890.00 BDT 7,890.00 tax excl.
BDT 8,890.00 BDT 7,890.00 tax incl.
BDT 8,890.00 BDT 7,890.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 8,890.00 BDT 7,890.00 tax excl.
BDT 8,890.00 BDT 7,890.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 8,890.00 BDT 7,890.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-1081

Brand: Raspberry Pi Official

Raspberry Pi 5 Active Cooler

(0)
Original Raspberry Pi Product. Temperature-Controlled Fan, Delivers up to 1.4CFM of Air Flow. Comes With Aluminium Heat Sink Compatible With the Official Raspberry Pi 5 Case. Stock is available with Complete Set. Please purchase Raspberry Pi 5 Complete Set. 
BDT 740.00
BDT 740.00 tax incl.
BDT 740.00 tax excl.
BDT 740.00 tax excl.
BDT 740.00 tax incl.
BDT 740.00 tax incl.
BDT 0.00 Tax
BDT 740.00 tax excl.
BDT 740.00 tax excl.
BDT 0.00 Tax
BDT 740.00 tax incl.
In-Stock
In stock: 34

Reference: RBD-0432

JF-0530B Pull Push Type Electric Solenoid Electromagnet 10mm 5N DC12V

(0)
Iron Body Material High quality ultra-compact electric lock. RoboticsBD Rustproof, durable, safe, convenient to use. Suction which tightly sucks the iron, thus locking the door. Designed with the open frame type and mount board, high power. Easy to install for the electric door lock or other automatic door lock systems with the mounting board Applicable...
BDT 590.00
BDT 590.00 tax incl.
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 590.00 tax incl.
BDT 590.00 tax incl.
BDT 0.00 Tax
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 0.00 Tax
BDT 590.00 tax incl.
More
In-Stock
In stock: 13

Reference: RBD-2515

5V Electromagnet - 5 Kg Holding Force - P25/20

(0)
Nominal Voltage: 5V DC Current Draw: 0.6 Amps at 5V Holding Force: 5 Kg / 11 lb Approximate Pickup Weight: 1 Kg / 2 lbEver wanted to feel like Magneto? Well, now you sort of can! Bring the ferromagnetic objects in the world under your control with an Electromagnet The simplest way to make an electromagnet is to get a solenoid, pass some current through...
BDT 890.00
BDT 890.00 tax incl.
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 890.00 tax incl.
BDT 890.00 tax incl.
BDT 0.00 Tax
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 0.00 Tax
BDT 890.00 tax incl.
More
In stock
In stock: 10

Reference: RBD-2372

RFID Reader Module 125KHz TK4100 RF UART IO Output Board For Access Control

(0)
This product is an ID card decoding module. After sensing the ID card, it will actively decode and output the 10-digit card number. It also has an output port that can output high and low levels, which can meet the requirements of general ID cards, such as reading, deleting, and registering. Card operation!
BDT 890.00
BDT 890.00 tax incl.
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 890.00 tax incl.
BDT 890.00 tax incl.
BDT 0.00 Tax
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 0.00 Tax
BDT 890.00 tax incl.
More
In stock
In stock: 27

Follow us on Facebook