Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 0.00 - BDT 204,035.00

Categories

Categories

Jumper Wire Type

Jumper Wire Type

Brand

Brand

Condition

Condition

Weight

Weight

  • 0 kg - 28,800 kg

  • Banner

Active filters
  • Categories: 3D Printer
  • Categories: Arduino Boards
  • Categories: Communication Module
  • Categories: Connector
  • Categories: HMI
  • Categories: Motor
  • Categories: Programmer

Reference: RBD-2126

Arduino Micro R3

(0)
Manufacturer: China Support TWI and SPI communication Input voltage (recommended) range from 7V to 12V Input Voltage (limit) range from 6V to 20V 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs) Onboard ATmega32u4 microcontroller with 32KB flash memory, 2.5KB SRAM and 1KB EEPROM
BDT 1,380.00
BDT 1,380.00 tax incl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax incl.
BDT 1,380.00 tax incl.
BDT 0.00 Tax
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 0.00 Tax
BDT 1,380.00 tax incl.
More
In-Stock
In stock: 24

Reference: 1317

TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 2,300.00
BDT 2,300.00 tax incl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax incl.
BDT 2,300.00 tax incl.
BDT 0.00 Tax
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 0.00 Tax
BDT 2,300.00 tax incl.
More
Out-of-Stock
In stock: -9

Reference: RBD-0727

12V Mini Cooling Fan 40x40x10mm

(0)
Operating Voltage: 12VDC Power Consumption: 1.42 W Body and Blade Constructed from Thermoplastic PBT of UL 94V-0 Single Phase 4 Pole Brushless DC Motor Precise Vapo Bearing Counterclockwise Rotation Direction if Viewed from front of Fan Blade
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In-Stock
In stock: 95

Reference: RBD-0345

ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module

(0)
802.11 b/g/n Standards Wi-Fi Direct (P2P), soft-AP 1MB Flash Memory Integrated low power 32-bit CPU could be used as an application processor A-MPDU & A-MSDU aggregation & 0.4ms guard interval Wake up and transmit packets in < 2ms Standby power consumption of < 1.0mW (DTIM3) RoboticsBD
BDT 230.00
BDT 230.00 tax incl.
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 230.00 tax incl.
BDT 230.00 tax incl.
BDT 0.00 Tax
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 0.00 Tax
BDT 230.00 tax incl.
More
In-Stock
In stock: 388

Reference: RBD-0314

Double-ended 50cm Cable Crocodile Clips

(0)
Colour: Red, Green, Yellow, White, and Black, etc. Cable length: 40 cm. RoboticsBD Net weight: 50 gm. They are very useful for connecting components to wires. It is insulation covered clips connected to the wire from both ends. RoboticsBD *You will receive 1 pcs cable of random color.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2142

CH340C WIFI Module Adapter Download Debug for ESP8266 ESP-01/01S

(0)
Operating Voltage: 5VDC USB to Serial Converter: CH340C Compatible With:ESP8266 ESP-01/01S Comes With Onboard Reset Switch Has Female Headers for Connecting the Wifi Module.
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-1386

Brand: Anycubic

Colored UV Resin 500mL Black

(0)
Wavelength(nm): 395-405 Color: Black Density(g/m^3): 1.08-1.13 Hardness(Shore D):79.0 Tensile Strength(MPa): 46-67 Elongation at Break(%):28-35
BDT 2,990.00
BDT 2,990.00 tax incl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax incl.
BDT 2,990.00 tax incl.
BDT 0.00 Tax
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 0.00 Tax
BDT 2,990.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0826

PolyMax 3.5mm Gold Connectors (1pair)

(0)
PolyMax 3.5mm Gold Connectors 3.5mm sprung gold connectors  handle the large current, 50A+ systems. perfect for 3500mAh or larger capacity batteries 
BDT 40.00
BDT 40.00 tax incl.
BDT 40.00 tax excl.
BDT 40.00 tax excl.
BDT 40.00 tax incl.
BDT 40.00 tax incl.
BDT 0.00 Tax
BDT 40.00 tax excl.
BDT 40.00 tax excl.
BDT 0.00 Tax
BDT 40.00 tax incl.
More
In-Stock
In stock: 331

Reference: RBD-0736

7x20mm Coreless Motor with 55mm Propeller Pair

(0)
Model: 720 Shaft Size: 1.0 mm Rated Voltage: 3.7 V. Current: 0.1 A. Rated RPM: 48000. Max Speed: 50000 RPM. Wire Length: 5cm Prop. Length: 55mm
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 97

Reference: RBD-0155

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328 Circuit Operating Voltage: 5V Clock frequency: 16MHz. Digital I/O Pins: 14 8 analog input port: A0 ~ A7. A pair of TTL level serial port transceiver : RX / TX. 6 PWM port: D3, D5, D6, D9, D10, D11. Support serial download.
BDT 680.00
BDT 680.00 tax incl.
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 680.00 tax incl.
BDT 680.00 tax incl.
BDT 0.00 Tax
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 0.00 Tax
BDT 680.00 tax incl.
More
In-Stock
In stock: 88

Reference: RBD-0103

M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module

(0)
This is M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module. The nRF24L01 is a highly integrated, ultra-low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub μA power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01...
BDT 199.00
BDT 199.00 tax incl.
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 199.00 tax incl.
BDT 199.00 tax incl.
BDT 0.00 Tax
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 0.00 Tax
BDT 199.00 tax incl.
More
In-Stock
In stock: 102

Reference: RBD-1523

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328P Circuit Operating Voltage: 5V Clock frequency: 16MHz. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. A pair of TTL level serial port transceiver : RX / TX.
BDT 430.00
BDT 430.00 tax incl.
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 430.00 tax incl.
BDT 430.00 tax incl.
BDT 0.00 Tax
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 0.00 Tax
BDT 430.00 tax incl.
More
In-Stock
In stock: 25

Reference: RBD-1227

3D Scanner Laser Desktop- DIY Red

(0)
Object Scanning Device with USB 2.0 Interface / CMOS Sensor
BDT 18,999.00
BDT 18,999.00 tax incl.
BDT 18,999.00 tax excl.
BDT 18,999.00 tax excl.
BDT 18,999.00 tax incl.
BDT 18,999.00 tax incl.
BDT 0.00 Tax
BDT 18,999.00 tax excl.
BDT 18,999.00 tax excl.
BDT 0.00 Tax
BDT 18,999.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-0750

85mm Antiskid Shockproof Wheels, Smart Car Robot Tires with 37GB Motor

(0)
Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor Diameter: 85 mm Width : 38 mm The material of Wheel: High-strength plastic The material of Tyre: Rubber Color: Black Tyre + Blue Rim
BDT 2,350.00
BDT 2,350.00 tax incl.
BDT 2,350.00 tax excl.
BDT 2,350.00 tax excl.
BDT 2,350.00 tax incl.
BDT 2,350.00 tax incl.
BDT 0.00 Tax
BDT 2,350.00 tax excl.
BDT 2,350.00 tax excl.
BDT 0.00 Tax
BDT 2,350.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0571

T Connector Male-Female Pair

(0)
Item Name: T plug Quantity: 1 male & 1 female Body Material: Brass and gold plated Internal Material: Nylon/PA Internal Resistance: 0.4mΩ
BDT 40.00
BDT 40.00 tax incl.
BDT 40.00 tax excl.
BDT 40.00 tax excl.
BDT 40.00 tax incl.
BDT 40.00 tax incl.
BDT 0.00 Tax
BDT 40.00 tax excl.
BDT 40.00 tax excl.
BDT 0.00 Tax
BDT 40.00 tax incl.
More
In-Stock
In stock: 421

Reference: RBD-0566

RS485 USB-485 Converter Adapter Support Win7 XP Vista Linux Mac OS

(0)
Fully compliant USB 2.0 standard, backward compatible with USB1.1 Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive Baud Rate Range: 75bps – 115200bps, up to 6Mbps Supports Plug, Play and hot-swap ( USB side) Better than using CH341D chip or similar chip to support the laptop USB port. Communication distance up to 1.2KM
BDT 1,000.00
BDT 1,000.00 tax incl.
BDT 1,000.00 tax excl.
BDT 1,000.00 tax excl.
BDT 1,000.00 tax incl.
BDT 1,000.00 tax incl.
BDT 0.00 Tax
BDT 1,000.00 tax excl.
BDT 1,000.00 tax excl.
BDT 0.00 Tax
BDT 1,000.00 tax incl.
More
In-Stock
In stock: 43

Reference: RBD-0838

Arduino Pro Micro 5V/16MHz

(0)
ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD
BDT 870.00
BDT 870.00 tax incl.
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 870.00 tax incl.
BDT 870.00 tax incl.
BDT 0.00 Tax
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 0.00 Tax
BDT 870.00 tax incl.
More
In-Stock
In stock: 41

Reference: RBD-0817

Nema 23 23HS5628 Stepper Motor

(0)
Step Angle Step Angle: 1.8 ° Current: 2.8 A/Phase Holding Torque: 10.1 N-cm Detent torque: 3.6 N.cm (Maximum) Lead Wires: 4 Shaft diameter: 8.00 mm
BDT 2,990.00
BDT 2,990.00 tax incl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax incl.
BDT 2,990.00 tax incl.
BDT 0.00 Tax
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 0.00 Tax
BDT 2,990.00 tax incl.
More
In-Stock
In stock: 20

Reference: RBD-0815

3D Pen 2nd Generation LED Display Screen with (6 Color Filament)

(0)
Input Voltage: 100-240 V AC. Temp: 160~230 Deg settable. Filament: 1.75 mm PLA or ABS. This 3D Pen is designed for the freehand drawing of 3-Dimensional objects Adjustable output speed, temperature Create projects horizontally or vertically Every 3d pen will be checked and tested on our lab before shipping, so you will not received "intact" package. No...
BDT 2,499.00
BDT 2,499.00 tax incl.
BDT 2,499.00 tax excl.
BDT 2,499.00 tax excl.
BDT 2,499.00 tax incl.
BDT 2,499.00 tax incl.
BDT 0.00 Tax
BDT 2,499.00 tax excl.
BDT 2,499.00 tax excl.
BDT 0.00 Tax
BDT 2,499.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0732

9V Battery to 2.1mm for Arduino Uno

(0)
Excellent material It is an environmental 9V battery buckle The Cable Length: 12cm Approx. Convenient for connecting a battery to your application. Save power and protect the environment Good electrical conductivity and comfortable sense of touch
BDT 22.00
BDT 22.00 tax incl.
BDT 22.00 tax excl.
BDT 22.00 tax excl.
BDT 22.00 tax incl.
BDT 22.00 tax incl.
BDT 0.00 Tax
BDT 22.00 tax excl.
BDT 22.00 tax excl.
BDT 0.00 Tax
BDT 22.00 tax incl.
More
In-Stock
In stock: 22

Reference: RBD-0440

HC-12 433Mhz Wireless Serial Transceiver Module - 1 Kilometer

(0)
433MHz operation Ultra-low power consumption (3.5mA or 22mA depending on mode) with sleep option (80μA). 10dBm output power and high sensitivity providing long range in the open environment. 3V-6V operating voltage. Serial pass-through mode to replace the serial cable (half duplex). IO pass-through modes. RoboticsBD
BDT 590.00
BDT 590.00 tax incl.
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 590.00 tax incl.
BDT 590.00 tax incl.
BDT 0.00 Tax
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 0.00 Tax
BDT 590.00 tax incl.
More
In-Stock
In stock: 24

Reference: RBD-2053

Arduino Pro Micro 5V/16MHz Type-C

(0)
ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD
BDT 755.00
BDT 755.00 tax incl.
BDT 755.00 tax excl.
BDT 755.00 tax excl.
BDT 755.00 tax incl.
BDT 755.00 tax incl.
BDT 0.00 Tax
BDT 755.00 tax excl.
BDT 755.00 tax excl.
BDT 0.00 Tax
BDT 755.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-1683

PLA Filament for 3D Pen

(0)
Compatible with 3D pen 15gram-17gram 1.75mm Random Color
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 175

Reference: RBD-0818

LDX-218 Servo Motor

(0)
17kg large torque. 15 kg·cm (208 oz·in) @6V 17 kg·cm (236 oz·in) @7.4V Full metal gear 180 degree rotation Using high-precision potentiometer with new design Convenient plug-in wire
BDT 2,490.00
BDT 2,490.00 tax incl.
BDT 2,490.00 tax excl.
BDT 2,490.00 tax excl.
BDT 2,490.00 tax incl.
BDT 2,490.00 tax incl.
BDT 0.00 Tax
BDT 2,490.00 tax excl.
BDT 2,490.00 tax excl.
BDT 0.00 Tax
BDT 2,490.00 tax incl.
More
In-Stock
In stock: 18

Reference: RBD-0560

MAX485 RS-485 Module TTL to RS-485 module for Arduino

(0)
On-board MAX485 chip, A low power consumption for the RS-485 communication, slew-rate limited transceiver. A low power consumption for the RS-485 communication Onboard then 5.08 (mm) pitch 2P terminal to facilitate RS-485 communication wiring. Slew-rate limited transceiver All pins of the chip have been lead to can be controlled through the...
BDT 399.00
BDT 399.00 tax incl.
BDT 399.00 tax excl.
BDT 399.00 tax excl.
BDT 399.00 tax incl.
BDT 399.00 tax incl.
BDT 0.00 Tax
BDT 399.00 tax excl.
BDT 399.00 tax excl.
BDT 0.00 Tax
BDT 399.00 tax incl.
More
Sold-out
In stock: -1

Reference: 0031

Jumper Wire 40 Pcs Set 20cm

(0)
3 Types Available (Please select from option) 1. Male to Male  2. Male to Female 3. Female-Female
BDT 100.00
BDT 100.00 tax incl.
BDT 100.00 tax excl.
BDT 100.00 tax excl.
BDT 100.00 tax incl.
BDT 100.00 tax incl.
BDT 0.00 Tax
BDT 100.00 tax excl.
BDT 100.00 tax excl.
BDT 0.00 Tax
BDT 100.00 tax incl.
More
In-Stock
In stock: 215

Reference: RBD-2195

50 cm Micro USB Cable for Arduino Leonardo and Node MCU

(0)
Fully compatible with the PC. Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions. Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference. Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 185

Reference: RBD-0925

18650 Battery Holder 4S with wire

(0)
Hold 4 standard 18650 batteries. Wire Length: 15 cm. Output: 14.8 V. Dimension (Appro.) : 80 x 76 x 18 mm. Weight: 28 gm. High-quality plastic material
BDT 100.00
BDT 100.00 tax incl.
BDT 100.00 tax excl.
BDT 100.00 tax excl.
BDT 100.00 tax incl.
BDT 100.00 tax incl.
BDT 0.00 Tax
BDT 100.00 tax excl.
BDT 100.00 tax excl.
BDT 0.00 Tax
BDT 100.00 tax incl.
More
In-Stock
In stock: 73

Reference: RBD-0819

Hiwonder LDX-227 Servo

(0)
17kg large torque. 15 kg·cm (208 oz·in) @6V 17 kg·cm (236 oz·in) @7.4V Full metal gear 270 degree rotation Using high-precision potentiometer with new design Convenient plug-in wire
BDT 2,250.00
BDT 2,250.00 tax incl.
BDT 2,250.00 tax excl.
BDT 2,250.00 tax excl.
BDT 2,250.00 tax incl.
BDT 2,250.00 tax incl.
BDT 0.00 Tax
BDT 2,250.00 tax excl.
BDT 2,250.00 tax excl.
BDT 0.00 Tax
BDT 2,250.00 tax incl.
More
In-Stock
In stock: 20

Reference: RBD-0443

GPRS GSM SIM900 Arduino Shield

(0)
Based on SIMCom‘s SIM900 Module Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. Control by AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
BDT 2,400.00
BDT 2,400.00 tax incl.
BDT 2,400.00 tax excl.
BDT 2,400.00 tax excl.
BDT 2,400.00 tax incl.
BDT 2,400.00 tax incl.
BDT 0.00 Tax
BDT 2,400.00 tax excl.
BDT 2,400.00 tax excl.
BDT 0.00 Tax
BDT 2,400.00 tax incl.
More
In-Stock
In stock: 22

Reference: RBD-0136

Arduino Due

(0)
Microcontroller: AT91SAM3X8E Operating Voltage: 3.3V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-16V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 (DAC) A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. CPU clock at 84Mhz 96KBytes of SRAM
BDT 3,990.00
BDT 3,990.00 tax incl.
BDT 3,990.00 tax excl.
BDT 3,990.00 tax excl.
BDT 3,990.00 tax incl.
BDT 3,990.00 tax incl.
BDT 0.00 Tax
BDT 3,990.00 tax excl.
BDT 3,990.00 tax excl.
BDT 0.00 Tax
BDT 3,990.00 tax incl.
More
In-Stock
In stock: 19

Follow us on Facebook