Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 3.00 - BDT 1,600,000.00

Categories

Categories

Jumper Wire Type

Jumper Wire Type

Brand

Brand

Weight

Weight

  • 0 kg - 28,800 kg

  • Banner

Active filters
  • Categories: 3D Printer
  • Categories: Cables - Wire
  • Categories: Display
  • Categories: Motor
  • Categories: Orange Pi
  • Categories: Robots

Reference: RBD-2633

SteerEase Obstacle Avoiding Robot - Plug and Play

(0)
Plug-and-play obstacle avoiding robot Ultrasonic sensor detects and avoids obstacles Up to 3 hours runtime on a full charge Compact and portable design Ideal for beginners and hobbyists
BDT 6,500.00
BDT 6,500.00 tax incl.
BDT 6,500.00 tax excl.
BDT 6,500.00 tax excl.
BDT 6,500.00 tax incl.
BDT 6,500.00 tax incl.
BDT 0.00 Tax
BDT 6,500.00 tax excl.
BDT 6,500.00 tax excl.
BDT 0.00 Tax
BDT 6,500.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-2020

4 Pin JST XH Female to Open Cable

(0)
Solid and durable. Safe and easy to install.
BDT 60.00
BDT 60.00 tax incl.
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 60.00 tax incl.
BDT 60.00 tax incl.
BDT 0.00 Tax
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 0.00 Tax
BDT 60.00 tax incl.
More
In-Stock
In stock: 27

Reference: RBD-1109

10 Digit LED Bar Graph Display

(0)
Bright Red LED chip, which is made from AlGaAs on GaAs substrate Blackface and RED LED segments Type: Common cathode No. of Pins: 20 Low Current Consumption High Brightness
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 98

Reference: RBD-0913

6V-12V Mini Air Pump Motor

(0)
High-Quality Pump Operating Voltage 12VDC Air pump rate: 4 LPM Current Consumption: 300mA Low Noise Operation Durable and Longer Lasting
BDT 620.00
BDT 620.00 tax incl.
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 620.00 tax incl.
BDT 620.00 tax incl.
BDT 0.00 Tax
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 0.00 Tax
BDT 620.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

(0)
Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 65

Reference: RBD-2061

Flat Ribbon 2.54MM Pitch FC-6 JTAG ISP AVR Data Cable 20cm 6 Pin

(0)
Compatible with all embedded systems platforms. Supports field updates and troubleshooting. Pins: 6. Cable length: 200mm. Cable size: 28 AWG.
BDT 90.00
BDT 90.00 tax incl.
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 90.00 tax incl.
BDT 90.00 tax incl.
BDT 0.00 Tax
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 0.00 Tax
BDT 90.00 tax incl.
More
In-Stock
In stock: 95

Reference: RBD-1164

LCD Display 16X2 with Header

(0)
For Standard LCD 16x2 with Male Header. Press here For Standard LCD 16x2 with Female Header. Press here For Standard LCD 16x2 with I2C adapter board soldered. Press here. For Standard LCD 16x2 with White Background. Press here. For Standard LCD 16x2 with Blue Background. Press here.
BDT 255.00
BDT 255.00 tax incl.
BDT 255.00 tax excl.
BDT 255.00 tax excl.
BDT 255.00 tax incl.
BDT 255.00 tax incl.
BDT 0.00 Tax
BDT 255.00 tax excl.
BDT 255.00 tax excl.
BDT 0.00 Tax
BDT 255.00 tax incl.
More
In-Stock
In stock: 6

Reference: RBD-0936

1100 GPH 12V Submersible Marine Boat Bilge Water Pump

(0)
High-Quality Pump Operating Voltage: 12VDC Flow Rate: 1100GPH Outlet Diameter 19mm
BDT 1,700.00
BDT 1,700.00 tax incl.
BDT 1,700.00 tax excl.
BDT 1,700.00 tax excl.
BDT 1,700.00 tax incl.
BDT 1,700.00 tax incl.
BDT 0.00 Tax
BDT 1,700.00 tax excl.
BDT 1,700.00 tax excl.
BDT 0.00 Tax
BDT 1,700.00 tax incl.
More
In-Stock
In stock: 29

Reference: RBD-0565

5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3

(0)
Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software. USB power supply and peripherals power phase are separate to protect computer security. All the signals are to-isolate which can protect your computer security. 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc. Wide input voltage range: 12-24V, and with...
BDT 3,500.00
BDT 3,500.00 tax incl.
BDT 3,500.00 tax excl.
BDT 3,500.00 tax excl.
BDT 3,500.00 tax incl.
BDT 3,500.00 tax incl.
BDT 0.00 Tax
BDT 3,500.00 tax excl.
BDT 3,500.00 tax excl.
BDT 0.00 Tax
BDT 3,500.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-0299

SteerEase Arduino Based Fire Fighting Robot - Plug and Play

(0)
Assemble & Fight Fires: Learn and combat simulated fires with this complete Arduino-based fire-fighting robot kit. Plug-and-Play Simplicity: Pre-assembled components and clear instructions make building and programming your robot a breeze (no soldering required). Educational & Engaging: Explore robotics, coding, and fire safety principles through...
BDT 5,500.00
BDT 5,500.00 tax incl.
BDT 5,500.00 tax excl.
BDT 5,500.00 tax excl.
BDT 5,500.00 tax incl.
BDT 5,500.00 tax incl.
BDT 0.00 Tax
BDT 5,500.00 tax excl.
BDT 5,500.00 tax excl.
BDT 0.00 Tax
BDT 5,500.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-2062

Flat Ribbon 2.54MM Pitch FC-8 JTAG ISP AVR Data Cable 20cm 8 Pin

(0)
Compatible with all embedded systems platforms. Supports field updates and troubleshooting. Pins: 8. Cable length: 200mm. Cable size: 28 AWG.
BDT 90.00
BDT 90.00 tax incl.
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 90.00 tax incl.
BDT 90.00 tax incl.
BDT 0.00 Tax
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 0.00 Tax
BDT 90.00 tax incl.
More
In-Stock
In stock: 31

Reference: RBD-1217

Nextion NX3224T024 - Generic 2.4" TFT LCD Touch Display

(0)
Nextion is a seamless Human Machine Interface (HMI) solution. Nextion provides a control and visualization interface between a human and a process, machine, application or appliance.  Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.
BDT 3,099.00
BDT 3,099.00 tax incl.
BDT 3,099.00 tax excl.
BDT 3,099.00 tax excl.
BDT 3,099.00 tax incl.
BDT 3,099.00 tax incl.
BDT 0.00 Tax
BDT 3,099.00 tax excl.
BDT 3,099.00 tax excl.
BDT 0.00 Tax
BDT 3,099.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-0949

Submersible 3V Mini DC Water Pump with Wire Horizontal Type

(0)
Operating Voltage : 2.5 ~ 4V Operating Current : 130 ~ 220mA Flow Rate : 80 ~ 120 L/H Maximum Lift : 40 ~ 110 mm Outlet Outside Diameter: 7.5 mm Outlet Inside Diameter: 5 mm
BDT 160.00
BDT 160.00 tax incl.
BDT 160.00 tax excl.
BDT 160.00 tax excl.
BDT 160.00 tax incl.
BDT 160.00 tax incl.
BDT 0.00 Tax
BDT 160.00 tax excl.
BDT 160.00 tax excl.
BDT 0.00 Tax
BDT 160.00 tax incl.
More
In-Stock
In stock: 33

Reference: RBD-2063

Flat Ribbon 2.54MM Pitch FC-10 JTAG ISP AVR Data Cable 20cm 10 Pin

(0)
Compatible with all embedded systems platforms. Supports field updates and troubleshooting. Pins: 10. Cable length: 200mm. Cable size: 28 AWG.
BDT 99.00
BDT 99.00 tax incl.
BDT 99.00 tax excl.
BDT 99.00 tax excl.
BDT 99.00 tax incl.
BDT 99.00 tax incl.
BDT 0.00 Tax
BDT 99.00 tax excl.
BDT 99.00 tax excl.
BDT 0.00 Tax
BDT 99.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-1218

Nextion NX8048T050 - 5.0" LCD TFT HMI Touch Display

(0)
Model No.:NX8048T050 Display Type:011R(R:Resitive Touchscreen) Operating Voltage (VDC):4.75 ~ 7 Max. Operating Current (mA):410 Touch Type: Resistive Colors:65K (65536)
BDT 10,590.00
BDT 10,590.00 tax incl.
BDT 10,590.00 tax excl.
BDT 10,590.00 tax excl.
BDT 10,590.00 tax incl.
BDT 10,590.00 tax incl.
BDT 0.00 Tax
BDT 10,590.00 tax excl.
BDT 10,590.00 tax excl.
BDT 0.00 Tax
BDT 10,590.00 tax incl.
More
In-Stock
In stock: 6

Reference: RBD-0950

RS-360 Mini DC 4-12V Water Pump Motor

(0)
Model : RS-360 micro-motors small pump Operating voltage : 4V-12V Current : 0.8A Motor diameter : 27 mm Pump Length : 52 mm Out of the water hole diameter : 4 mm Weight : 70g
BDT 450.00
BDT 450.00 tax incl.
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 450.00 tax incl.
BDT 450.00 tax incl.
BDT 0.00 Tax
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 0.00 Tax
BDT 450.00 tax incl.
More
In-Stock
In stock: 23

Reference: RBD-1369

Micro Limit Switches

(0)
Lifetime: 30 million Rated voltage:125V Rated current: 5A Dissipation Power: IC Supply voltage: IC KW11-3Z bearing microswitch.
BDT 130.00
BDT 130.00 tax incl.
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 130.00 tax incl.
BDT 130.00 tax incl.
BDT 0.00 Tax
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 0.00 Tax
BDT 130.00 tax incl.
More
In-Stock
In stock: 50

Reference: RBD-1219

3.5inch LCD Display Shield for Arduino

(0)
Supports development boards such as Arduino UNO and Mega2560 for plug-in use without wiring 480X320 resolution, clear display Support 16-bit RGB 65K color display, display rich colors 8-bit parallel bus, faster than serial SPI refresh On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V operating voltage Easy to expand the experiment with SD card...
BDT 1,680.00
BDT 1,680.00 tax incl.
BDT 1,680.00 tax excl.
BDT 1,680.00 tax excl.
BDT 1,680.00 tax incl.
BDT 1,680.00 tax incl.
BDT 0.00 Tax
BDT 1,680.00 tax excl.
BDT 1,680.00 tax excl.
BDT 0.00 Tax
BDT 1,680.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-0951

N20 DC 6V 200RPM Mini Metal Gear Motor

(0)
This is a DC Mini Metal Gear Motor, ideal for making robots Lightweight, high torque and low RPM. Fine craftsmanship, durable, not easy to wear. With excellent stall characteristics, can climb hills easily. You can also easily mount a wheel on the motor’s output shaft.
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 200

Reference: RBD-1678

Big Easy Driver - Stepper Motor Driver

(0)
2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-1406

Cable - 30 cm servo extension

(0)
High-Quality cable One male and one female connector. Flat 30cm Servo Lead Extention (JR) Quality wire and connectors used. Great for larger planes with servos that experience high loads.
BDT 135.00
BDT 135.00 tax incl.
BDT 135.00 tax excl.
BDT 135.00 tax excl.
BDT 135.00 tax incl.
BDT 135.00 tax incl.
BDT 0.00 Tax
BDT 135.00 tax excl.
BDT 135.00 tax excl.
BDT 0.00 Tax
BDT 135.00 tax incl.
More
In-Stock
In stock: 101

Reference: RBD-1251

7 Inch TFT IPS Monitor for Raspberry Pi

(0)
Input Voltage: DC 7.4~35V. Input Current: DC 0.5A-1.5A. Power Consumption: ≤8W Watts. Resolution: 1024 x 600. Aspect Ratio: 16:9 & 4:3. Contrast Ratio: 500:1. Monitor Mount is not Available.
BDT 6,390.00
BDT 6,390.00 tax incl.
BDT 6,390.00 tax excl.
BDT 6,390.00 tax excl.
BDT 6,390.00 tax incl.
BDT 6,390.00 tax incl.
BDT 0.00 Tax
BDT 6,390.00 tax excl.
BDT 6,390.00 tax excl.
BDT 0.00 Tax
BDT 6,390.00 tax incl.
More
In-Stock
In stock: 10

Reference: RBD-1056

Double Shaft DC Motor

(0)
Operating Voltage: 3 to 6VDC Shaft Diameter: 2 mm (approx.) Shaft Length: 10mm (approx.) Weight; 15g (approx.)
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
Out-of-Stock
In stock: -1

Reference: RBD-1312

Makeblock XY-Plotter Robot Kit V2

(0)
XY plotter robot kit is a drawing robot Supports Pen and Pencil Supports Laser Engraving
BDT 25,800.00
BDT 25,800.00 tax incl.
BDT 25,800.00 tax excl.
BDT 25,800.00 tax excl.
BDT 25,800.00 tax incl.
BDT 25,800.00 tax incl.
BDT 0.00 Tax
BDT 25,800.00 tax excl.
BDT 25,800.00 tax excl.
BDT 0.00 Tax
BDT 25,800.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-1108

0.56 Inch 3 Digit 7 Segment Red Common Cathode Display

(0)
Bright Red LED chip, which is made from AlGaAs on GaAs substrate Blackface and RED LED segments Type: Common cathode No. of Pins: 12 Low Current Consumption High Brightness
BDT 50.00
BDT 50.00 tax incl.
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 50.00 tax incl.
BDT 50.00 tax incl.
BDT 0.00 Tax
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 0.00 Tax
BDT 50.00 tax incl.
More
In-Stock
In stock: 93

Reference: RBD-1061

6V TT DC Gear BO Motor Dual Shaft

(0)
Low density: lightweight, low inertia. Capability to absorb shock and vibration as a result of elastic compliance. Ability to operate with minimum or no lubrication, due to inherent lubricity. The relatively low coefficient of friction. Operating Voltage(VDC): 3~12 Shaft Length (mm): 8.5 Shaft Diameter (mm): 5.5 (Double D-type) No Load Current: 40-180mA....
BDT 85.00
BDT 85.00 tax incl.
BDT 85.00 tax excl.
BDT 85.00 tax excl.
BDT 85.00 tax incl.
BDT 85.00 tax incl.
BDT 0.00 Tax
BDT 85.00 tax excl.
BDT 85.00 tax excl.
BDT 0.00 Tax
BDT 85.00 tax incl.
More
In-Stock
In stock: 185

Reference: RBD-0941

Servo Extension Cable Male to Female 300mm

(0)
High-Quality cable One male and one female connector. Flat 25 cm Servo Lead Extension (Futaba) Quality wire and connectors used. Great for larger planes with servos that experience high loads.
BDT 95.00
BDT 95.00 tax incl.
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 95.00 tax incl.
BDT 95.00 tax incl.
BDT 0.00 Tax
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 0.00 Tax
BDT 95.00 tax incl.
More
In-Stock
In stock: 66

Reference: RBD-1068

N20 12V 100 RPM Micro Metal DC Gear Motor

(0)
This is a DC Mini Metal Gear Motor, ideal for making robots Lightweight, high torque and low RPM. Fine craftsmanship, durable, not easy to wear. With excellent stall characteristics, can climb hills easily. You can also easily mount a wheel on the motor’s output shaft.
BDT 295.00
BDT 295.00 tax incl.
BDT 295.00 tax excl.
BDT 295.00 tax excl.
BDT 295.00 tax incl.
BDT 295.00 tax incl.
BDT 0.00 Tax
BDT 295.00 tax excl.
BDT 295.00 tax excl.
BDT 0.00 Tax
BDT 295.00 tax incl.
More
In-Stock
In stock: 13

Reference: RBD-0914

MAX7219 4 Channel Dot Matrix Display Panel

(0)
Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 320 mA Display Dimensions: 32x32x6 (LxWxH) mm PCB Dimensions: 128×32 (LxW) mm
BDT 650.00
BDT 650.00 tax incl.
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 650.00 tax incl.
BDT 650.00 tax incl.
BDT 0.00 Tax
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 0.00 Tax
BDT 650.00 tax incl.
More
In-Stock
In stock: 27

Reference: RBD-0710

10mm - 12mm U-Shaped Solderless Breadboard Jumper Cable (Pack of 5)

(0)
10mm - 12mm U Shape Solderless Breadboard Jumper Cable Designed for solderless breadboarding Helps keep projects neat and organized Eliminates the need for stripping cables
BDT 15.00
BDT 15.00 tax incl.
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 15.00 tax incl.
BDT 15.00 tax incl.
BDT 0.00 Tax
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 0.00 Tax
BDT 15.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-1752

Ortur Laser Master 2 20W with STM32 MCU High Speed Ortur Laser Engraver and Cutter Kit

(0)
Ortur Laser Master 2 Model: Ortur OLM2-LU1-4 20W Year: 2021 Engrave Area: 400mm x 430m Available Laser Modules: 20W Model – Laser Power: 5000-5500 MW Laser Engraver and Cutter Kit
BDT 41,000.00
BDT 41,000.00 tax incl.
BDT 41,000.00 tax excl.
BDT 41,000.00 tax excl.
BDT 41,000.00 tax incl.
BDT 41,000.00 tax incl.
BDT 0.00 Tax
BDT 41,000.00 tax excl.
BDT 41,000.00 tax excl.
BDT 0.00 Tax
BDT 41,000.00 tax incl.
More
Out-of-Stock
In stock: 0

Follow us on Facebook