• Banner

Active filters
  • Categories: 3D Printed
  • Categories: Arduino Boards
  • Categories: Display
  • Categories: Motor
  • Categories: Power Module & Adapter

Reference: RBD-0494

Actiontec Genuine 12V 2A AC Adapter

(0)
Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz. Input current (mA): 100. Output Power: 12V 2A. Input Plug: 2-Pin USA type. Output Plug: 5.5mm DC plug. RoboticsBD Model: STD-120200
BDT 650.00
BDT 650.00 tax incl.
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 650.00 tax incl.
BDT 650.00 tax incl.
BDT 0.00 Tax
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 0.00 Tax
BDT 650.00 tax incl.
More
In-Stock
In stock: 66

Reference: RBD-0390

37GB 12V High Torque Gear Motor - 60 RPM

(0)
DC 12V 60 RPM 37GB-550 Gear Reducer Motor Consumes less current  Higher durability 
BDT 2,200.00
BDT 2,200.00 tax incl.
BDT 2,200.00 tax excl.
BDT 2,200.00 tax excl.
BDT 2,200.00 tax incl.
BDT 2,200.00 tax incl.
BDT 0.00 Tax
BDT 2,200.00 tax excl.
BDT 2,200.00 tax excl.
BDT 0.00 Tax
BDT 2,200.00 tax incl.
More
In-Stock
In stock: 36

Reference: RBD-0274

Brand: Waveshare

Raspberry Pi 5inch Resistive Touch HDMI LCD

(0)
5 inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi Installation Instruction: http://www.waveshare.com/wiki/5inch_HDMI_LCD Raspbian Image for 5 inch HDMI Diplay with Touch :  Raspbian 5 inch HDMI with Touch Download Link    
BDT 4,850.00
BDT 4,850.00 tax incl.
BDT 4,850.00 tax excl.
BDT 4,850.00 tax excl.
BDT 4,850.00 tax incl.
BDT 4,850.00 tax incl.
BDT 0.00 Tax
BDT 4,850.00 tax excl.
BDT 4,850.00 tax excl.
BDT 0.00 Tax
BDT 4,850.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0268

Brand: RoboticsBD

3D Printed Robotics claw with servo motor

(0)
Description: Material: PLA (3D Printed)Claw max angle: 55mmLength: 108mmWidth: 98mm (streched)Color: Golden, Blue, Red Servo Motor: MG996R
BDT 1,500.00
BDT 1,500.00 tax incl.
BDT 1,500.00 tax excl.
BDT 1,500.00 tax excl.
BDT 1,500.00 tax incl.
BDT 1,500.00 tax incl.
BDT 0.00 Tax
BDT 1,500.00 tax excl.
BDT 1,500.00 tax excl.
BDT 0.00 Tax
BDT 1,500.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0286

Arduino Uno R3 Bumper

(0)
3D Printed Arduino Uno R3 Bumper or base.Short Circuit Prevention: Safeguard your microcontroller against the risk of short circuits when placing it on a flat conductive surface. The bumper acts as a protective barrier, reducing the chances of accidental electrical contact. Note: Arduino Uno is not included
BDT 30.00 BDT 50.00
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax incl.
More
In stock
In stock: 14

Reference: RBD-0218

High Torque Gear Motor 12V, 50 RPM

(0)
High Torque Gear Motor 12V, 50 RPM Volt: DC 12V RPM: 50 Torque 13KG/CM
BDT 750.00
BDT 750.00 tax incl.
BDT 750.00 tax excl.
BDT 750.00 tax excl.
BDT 750.00 tax incl.
BDT 750.00 tax incl.
BDT 0.00 Tax
BDT 750.00 tax excl.
BDT 750.00 tax excl.
BDT 0.00 Tax
BDT 750.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0159

LCD Keypad Shield for Arduino

(0)
Provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 6 keys select, up, right, down, left and reset. To save the digital IO pins, the keypad interface only uses one ADC channel. The key value is read out through a 5 stage voltage...
BDT 550.00
BDT 550.00 tax incl.
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 550.00 tax incl.
BDT 550.00 tax incl.
BDT 0.00 Tax
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 0.00 Tax
BDT 550.00 tax incl.
More
In-Stock
In stock: 33

Reference: RBD-0110

Raspberry Pi Power Adapter Micro USB

(0)
রাস্পবেরি পাই এর জন্য একটি স্ট্যাবল পাওয়ার সাপ্লাই এর প্রয়োজনীয়তা অনেক।  আমরা অনেক পাওয়ার সাপ্লাই টেস্ট করে এর এই পাওয়ার সাপ্লাইটির ক্যাপাসিটি সন্তোষজনক পেয়েছি। যদিও মেনশন করা  5V,3A. আমরা আমাদের টেস্ট এ  5V, 1.5Amp+ কনস্ট্যান্ট কারেন্ট পেয়েছি। যদি আপনার খুব বেশি পেরিফেরাল না দরকার হয় তবে এটি ব্যবহার করতে পারেন।  এছাড়া আমাদের কাছে অরজিনাল রাস্পবেরি পাই এর...
BDT 390.00
BDT 390.00 tax incl.
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 390.00 tax incl.
BDT 390.00 tax incl.
BDT 0.00 Tax
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 0.00 Tax
BDT 390.00 tax incl.
More
Out-of-Stock
In stock: -2

Reference: RBD-0094

Arduino Uno R3

(0)
The Arduino Uno R3 High-Quality Edition Arduino UNO in Bangladesh Micro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6. The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...
BDT 1,050.00
BDT 1,050.00 tax incl.
BDT 1,050.00 tax excl.
BDT 1,050.00 tax excl.
BDT 1,050.00 tax incl.
BDT 1,050.00 tax incl.
BDT 0.00 Tax
BDT 1,050.00 tax excl.
BDT 1,050.00 tax excl.
BDT 0.00 Tax
BDT 1,050.00 tax incl.
More
In-Stock
In stock: 163

Reference: RBD-0815

3D Pen 2nd Generation LED Display Screen with (6 Color Filament)

(0)
Input Voltage: 100-240 V AC. Temp: 160~230 Deg settable. Filament: 1.75 mm PLA or ABS. This 3D Pen is designed for the freehand drawing of 3-Dimensional objects Adjustable output speed, temperature Create projects horizontally or vertically Every 3d pen will be checked and tested on our lab before shipping, so you will not received "intact" package. No...
BDT 2,499.00
BDT 2,499.00 tax incl.
BDT 2,499.00 tax excl.
BDT 2,499.00 tax excl.
BDT 2,499.00 tax incl.
BDT 2,499.00 tax incl.
BDT 0.00 Tax
BDT 2,499.00 tax excl.
BDT 2,499.00 tax excl.
BDT 0.00 Tax
BDT 2,499.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0573

DC 5V Stepper Motor with ULN2003 Driver Board 28BYJ-48

(0)
Rated voltage: 5V DC Reduction Ratio: 64:1 Step Angle: 5.625° /64 Frequency: 100Hz Self-positioning Torque: >34.3mN.m Friction torque: 600-1200 gf.cm Pull in torque: 300 gf.cm
BDT 199.00
BDT 199.00 tax incl.
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 199.00 tax incl.
BDT 199.00 tax incl.
BDT 0.00 Tax
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 0.00 Tax
BDT 199.00 tax incl.
More
In-Stock
In stock: 104

Reference: RBD-0549

Breadboard Power Supply Module 3.3V 5V

(0)
Breadboard power supply module, compatible with 5V, 3.3V. RoboticsBD Apply to MB102 breadboard Input voltage: 6.5-12 V (DC) or USB power supply Output voltage: 3.3V/5V can switch over Maximum output current: <700 ma Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V On-board two groups of 3.3V, 5V DC output plug pin, convenient...
BDT 95.00
BDT 95.00 tax incl.
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 95.00 tax incl.
BDT 95.00 tax incl.
BDT 0.00 Tax
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 0.00 Tax
BDT 95.00 tax incl.
More
In-Stock
In stock: 58

Reference: RBD-0340

Brand: Waveshare

5inch HDMI Touch Screen (B) + Bicolor Case (Original Waveshare)

(0)
Size: 5″ Resolution: 800×480 Display Port: HDMI Resistive touch control. Support backlight control, more power saving. RoboticsBD
BDT 6,300.00
BDT 6,300.00 tax incl.
BDT 6,300.00 tax excl.
BDT 6,300.00 tax excl.
BDT 6,300.00 tax incl.
BDT 6,300.00 tax incl.
BDT 0.00 Tax
BDT 6,300.00 tax excl.
BDT 6,300.00 tax excl.
BDT 0.00 Tax
BDT 6,300.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-0323

Arduino Uno R3 SMD

(0)
Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital I / O Pins 14 (of which 6 provide PWM output) RoboticsBD Analog Input Pins: 6 A programming cable is included.
BDT 574.00
BDT 574.00 tax incl.
BDT 574.00 tax excl.
BDT 574.00 tax excl.
BDT 574.00 tax incl.
BDT 574.00 tax incl.
BDT 0.00 Tax
BDT 574.00 tax excl.
BDT 574.00 tax excl.
BDT 0.00 Tax
BDT 574.00 tax incl.
More
In-Stock
In stock: 151

Reference: RBD-2335

Arduino Uno R3

(0)
The Arduino Uno R3 Standard-Quality Edition Micro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6 We are pleased to present a more cost-effective version of the Arduino Uno R3, a widely acclaimed and versatile platform for electronics...
BDT 710.00
BDT 710.00 tax incl.
BDT 710.00 tax excl.
BDT 710.00 tax excl.
BDT 710.00 tax incl.
BDT 710.00 tax incl.
BDT 0.00 Tax
BDT 710.00 tax excl.
BDT 710.00 tax excl.
BDT 0.00 Tax
BDT 710.00 tax incl.
More
In-Stock
In stock: 465

Reference: RBD-1163

Robotics Arm EEZYbotARM MK1

(0)
The design intent was to make something "easy" to make robotics arm It uses Mini servos for driving the kinematics linkage and you can use Arduino and a decent power supply (2A) to program and drive it. All the pieces are 3DPrinted in PLA.
BDT 6,599.00
BDT 6,599.00 tax incl.
BDT 6,599.00 tax excl.
BDT 6,599.00 tax excl.
BDT 6,599.00 tax incl.
BDT 6,599.00 tax incl.
BDT 0.00 Tax
BDT 6,599.00 tax excl.
BDT 6,599.00 tax excl.
BDT 0.00 Tax
BDT 6,599.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0623

DC-DC 9V/12V/24V to 5V USB Step Down Power Module 2A

(0)
Input voltage range: 6-26V Output voltage: 5.2V (consider the charge line loss, the output is 5.2V or so, the load side is about 5V) Output current: 3A (in the absence of a heat sink device, the stable output current is 2A) Two output Port can charge two devices simultaneously. RoboticsBD
BDT 400.00
BDT 400.00 tax incl.
BDT 400.00 tax excl.
BDT 400.00 tax excl.
BDT 400.00 tax incl.
BDT 400.00 tax incl.
BDT 0.00 Tax
BDT 400.00 tax excl.
BDT 400.00 tax excl.
BDT 0.00 Tax
BDT 400.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-0339

Brand: Waveshare

3.5inch Resistive Touch Display (B) for Raspberry Pi

(0)
3.5inch Resistive Touch Display (B) For Raspberry Pi 480×320 IPS Screen SPI Check out New Product 3.5inch HDMI Display-B
BDT 3,900.00
BDT 3,900.00 tax incl.
BDT 3,900.00 tax excl.
BDT 3,900.00 tax excl.
BDT 3,900.00 tax incl.
BDT 3,900.00 tax incl.
BDT 0.00 Tax
BDT 3,900.00 tax excl.
BDT 3,900.00 tax excl.
BDT 0.00 Tax
BDT 3,900.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0309

3650 Brushless Motor 3930KV + 60A Waterproof BEAST Series ESC

(0)
4 poles 12 slot Hi-torque motor design CNC machined 6061 T6 windings maximizes efficiency High RPM ABEC5 oversize bearings Universal fit, fit all 1/10 brushless cars-multi-mounting system for M3 screws Precision balanced rotor, smoothness for best reliability and maximum RPM
BDT 8,000.00
BDT 8,000.00 tax incl.
BDT 8,000.00 tax excl.
BDT 8,000.00 tax excl.
BDT 8,000.00 tax incl.
BDT 8,000.00 tax incl.
BDT 0.00 Tax
BDT 8,000.00 tax excl.
BDT 8,000.00 tax excl.
BDT 0.00 Tax
BDT 8,000.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-1683

PLA Filament for 3D Pen

(0)
Compatible with 3D pen 15gram-17gram 1.75mm Random Color
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 175

Reference: RBD-0696

USB DC 5V to DC 12V Step up Cable Module Converter

(0)
Voltage : Input through (USB) DC 5V Output via (DC Round Pin) : DC 12V Color: BLACK Input / Output Current: Maximum Input 0.6 Easier for installation save time and money Easy to use.
BDT 390.00
BDT 390.00 tax incl.
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 390.00 tax incl.
BDT 390.00 tax incl.
BDT 0.00 Tax
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 0.00 Tax
BDT 390.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-0235

Brand: SparkFun Electronics

Graphic LCD 128x64 STN LED Backlight

(0)
Description: This is a framed graphical LCD 64x128 with  LED backlight. This unit is a very clear STN type LCD with  a simple command interface. This new module includes the negative voltage circuitry on board!
BDT 2,300.00
BDT 2,300.00 tax incl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax incl.
BDT 2,300.00 tax incl.
BDT 0.00 Tax
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 0.00 Tax
BDT 2,300.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0217

Servo Motor Micro MG90S 180 Degree Rotation

(0)
Model: MG90S Weight: 13 gm Operating voltage: 4.8V~ 6.6V Servo Plug: JR Stall torque @4.8V : 1.8kg-cm Stall torque @6.6V : 2.2kg-cm Note: The component, colour & shape of the motor may vary depending on our stock rotation.
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 330

Reference: RBD-0009

Arduino Mega 2560 R3

(0)
54 Digital I/O terminals (14 of which have programmable PWM outputs). 16 Analog Inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock. RoboticsBD Operating voltage: 6 ~ 12v. Dimensions: 110 x 53 x 15 mm.
BDT 1,895.00
BDT 1,895.00 tax incl.
BDT 1,895.00 tax excl.
BDT 1,895.00 tax excl.
BDT 1,895.00 tax incl.
BDT 1,895.00 tax incl.
BDT 0.00 Tax
BDT 1,895.00 tax excl.
BDT 1,895.00 tax excl.
BDT 0.00 Tax
BDT 1,895.00 tax incl.
More
In-Stock
In stock: 35

Reference: RBD-1397

Arduino Mega 2560 CH340

(0)
Programmer: CH340 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader
BDT 1,345.00
BDT 1,345.00 tax incl.
BDT 1,345.00 tax excl.
BDT 1,345.00 tax excl.
BDT 1,345.00 tax incl.
BDT 1,345.00 tax incl.
BDT 0.00 Tax
BDT 1,345.00 tax excl.
BDT 1,345.00 tax excl.
BDT 0.00 Tax
BDT 1,345.00 tax incl.
More
In-Stock
In stock: 65

Reference: RBD-0732

9V Battery to 2.1mm for Arduino Uno

(0)
Excellent material It is an environmental 9V battery buckle The Cable Length: 12cm Approx. Convenient for connecting a battery to your application. Save power and protect the environment Good electrical conductivity and comfortable sense of touch
BDT 22.00
BDT 22.00 tax incl.
BDT 22.00 tax excl.
BDT 22.00 tax excl.
BDT 22.00 tax incl.
BDT 22.00 tax incl.
BDT 0.00 Tax
BDT 22.00 tax excl.
BDT 22.00 tax excl.
BDT 0.00 Tax
BDT 22.00 tax incl.
More
In-Stock
In stock: 22

Reference: RBD-0356

Abs Material 2 Axis Pan Tilt Camera Mount With MG90

(0)
PV Nylon Head Two Axial plastic Two axial platform Anti-vibration lightweight Good design and shape Net weight 20g Color : Black Material: Plastic.
BDT 1,200.00
BDT 1,200.00 tax incl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax incl.
BDT 1,200.00 tax incl.
BDT 0.00 Tax
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 0.00 Tax
BDT 1,200.00 tax incl.
More
In-Stock
In stock: 10

Reference: RBD-0234

Brand: SparkFun Electronics

LCD Cape - pcDuino V3 (1024x600 7" LVDS)

(0)
Description: This is a 7" LVDS LCD Cape for the pcDuino V3  with a 1024x600 screen resolution and capacitive touch from  LinkSprite. This massive screen is a great addition for the  pcDuino V3 that compliments its extreme versatility as a mini  PC development platform. 
BDT 7,500.00
BDT 7,500.00 tax incl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax incl.
BDT 7,500.00 tax incl.
BDT 0.00 Tax
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 0.00 Tax
BDT 7,500.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0020

Servo Motor Micro SG90 180 Degree Rotation

(0)
Model: SG90 Weight: 9 gm Operating voltage: 3.0V~ 7.2V Servo Plug: JR Stall torque @4.8V : 1.2kg-cm Stall torque @6.6V : 1.6kg-cm Note: Product images/ Components brand may vary from actual product as our stock rotates.
BDT 149.00
BDT 149.00 tax incl.
BDT 149.00 tax excl.
BDT 149.00 tax excl.
BDT 149.00 tax incl.
BDT 149.00 tax incl.
BDT 0.00 Tax
BDT 149.00 tax excl.
BDT 149.00 tax excl.
BDT 0.00 Tax
BDT 149.00 tax incl.
More
In-Stock
In stock: 417

Reference: RBD-1364

Holder for 10 mm LED light strip

(0)
10 mm LED light strips. Attached with a nail or a screw.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
Out-of-Stock
In stock: -2

Reference: RBD-1214

Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU

(0)
The board is compatible with Mega 2560.  excellent solution for developing projects based on ATmega2560. The board can be powered directly through the Micro USB connector The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.
BDT 1,590.00
BDT 1,590.00 tax incl.
BDT 1,590.00 tax excl.
BDT 1,590.00 tax excl.
BDT 1,590.00 tax incl.
BDT 1,590.00 tax incl.
BDT 0.00 Tax
BDT 1,590.00 tax excl.
BDT 1,590.00 tax excl.
BDT 0.00 Tax
BDT 1,590.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-0258

Brand: SparkFun Electronics

SparkFun Micro OLED Breakout

(0)
SparkFun Micro OLED Breakout
BDT 1,800.00
BDT 1,800.00 tax incl.
BDT 1,800.00 tax excl.
BDT 1,800.00 tax excl.
BDT 1,800.00 tax incl.
BDT 1,800.00 tax incl.
BDT 0.00 Tax
BDT 1,800.00 tax excl.
BDT 1,800.00 tax excl.
BDT 0.00 Tax
BDT 1,800.00 tax incl.
More
Out-of-Stock
In stock: 0

Follow us on Facebook