Reference: RBD-1640
Banner

The HLK-LD2410C 24GHz mmWave Radar Sensor is a cutting-edge module designed for high-sensitivity human presence detection. Utilizing FMCW radar technology, it identifies motion, micro-movements, and stationary states within a 5-meter range. This versatile sensor is optimized for indoor applications, providing real-time detection and customizable sensitivity through visual tools or Bluetooth. Its compact size, wide-angle detection, and robust signal processing make it perfect for smart lighting, security systems, and energy-efficient home automation projects. Featured By RoboticsBD.


Product Images are shown for illustrative purposes only and may differ from the actual product.
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD


RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
| General Specifications | |
| Operating Frequency | 24GHz |
| Maximum Detection Range | 5 meters |
| Resolution | 0.75 meters |
| Detection Angle | ±60° |
| Input Voltage | 5-12V |
| Output Interfaces | GPIO, UART |
| Communication | Bluetooth, Serial Port |
| Operating Temperature | -20°C to +60°C |
| Dimensions | 16 x 22 mm |
| Shipment Weight | 0.002 kg |
| Shipment Dimensions | 3 x 2 x 2 cm |
Please allow 5% measuring deviation due to manual measurement.
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD


1. Confirm the minimum installation clearance
If the radar needs to be installed with a casing, the casing must have good wave-transmitting properties at 24GHz, and cannot contain metal materials or materials that have a shielding effect on electromagnetic waves.
2. Installation Environment Requirements
This product needs to be installed in a suitable environment. If it is used in the following environments, the detection effect will be affected:
• There are non-human objects that are continuously moving in the sensing area, such as animals, continuously swinging curtains, large green plants facing the air outlet, etc.
• There is a large area of strong reflectors in the sensing area, and the strong reflectors will cause interference to the radar antenna.
• When installing on a wall, external interference factors such as air conditioners and electric fans at the top of the room need to be considered
3. Precautions during installation
• Try to ensure that the radar antenna is facing the area to be detected, and the surrounding area of the antenna is open and unobstructed
• To ensure that the installation position of the sensor is firm and stable, the shaking of the radar itself will affect the detection effect
• Make sure that there is no movement or vibration on the back of the radar. Due to the penetrating nature of radar waves, the back lobe of the antenna signal may detect moving objects behind the radar. Metal shielding cover or metal backplane can be used to shield the radar back lobe and reduce the influence of objects on the back of the radar
• The theoretical distance accuracy of radar can be accurate to 0.15 meters, which is the result obtained through special algorithm processing based on the physical resolution of 0.75 meters. Due to the differences in the size, state, and RCS of the target, the target distance accuracy will fluctuate; at the same time The maximum distance will also fluctuate slightly
* Install software
Currently the APP supports Android and IOS platforms, you can download it from this link: https://www.pgyer.com/Lq8p (Android) You can also go to major app stores to search for "HLKRadarTools" and install it.
* Instructions
Open the app, and the app searches for nearby radar devices. The broadcast name of the device is "HLK-LD2410B_xxxx" (xxxx is the last four digits of the mac address). After the module is successfully connected, you can view the radar information, or debug and save the parameters.
The use distance of the APP should not exceed the Bluetooth signal range (within 4 meters)
The process of modifying the radar parameters of the Bluetooth APP is the same as that of the PC host computer tool.
* Turn on bluetooth again
The Bluetooth function of LD2410C is enabled by default, and Bluetooth can be turned off or turned on through the serial port protocol (see LD2410B serial port communication protocol.pdf). If the bluetooth has been turned off, or the serial port cannot be used, the bluetooth can be turned on again after the module is powered off and then powered on for more than 5 times within 2~3s.
1 x HLK-LD2410C 24GHz mmWave 5M Human Presence Radar Sensor Motion Module
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Reference: RBD-1640
Reference: RBD-1728
Reference: RBD-0424
Reference: RBD-2326
Brand: DFRobot
Reference: RBD-2762
Reference: RBD-2678
Reference: RBD-0665
Reference: RBD-2227
Brand: Hi-Link
Reference: RBD-4122
Reference: RBD-2330
Reference: RBD-3262
Reference: RBD-3113
Reference: RBD-0319
Reference: RBD-3579
Reference: RBD-1173
Reference: RBD-1348
We'll slide into your inbox when the product is back in stock.
Reference: RBD-0032
Reference: 0245
Reference: RBD-0133
Reference: RBD-0656
Reference: RBD-2640
Reference: RBD-0022
Reference: RBD-0840
We'll slide into your inbox when the product is back in stock.
Reference: RBd-2402
Brand: Hi-Link
Reference: RBD-2352
Brand: Hi-Link
Reference: RBD-3132
Brand: Hi-Link
Reference: RBD-2395
Brand: Hi-Link
Reference: RBD-0622
check_circle
check_circle