Home

  • Banner

    Arduino CNC Shield V3 Robotics Bangladesh
    • Arduino CNC Shield V3 Robotics Bangladesh
    • Arduino CNC Shield V3 Robotics Bangladesh

    Arduino CNC Shield V3

    RBD-1065

    • Latest Arduino CNC Shield Version 3.10
    • GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
    • Coolant enable
    • Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
    • Compact design.
    • 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
    • 2 x End stops for each axis (6 in total)
    BDT 240
    BDT 240 BDT 240 BDT 240 BDT 240
    Tax excluded Tax includedTax excludedTax includedTax excluded
    BDT 240 Tax excluded
    BDT 240 Tax included
    BDT 0 Tax
    BDT 240 Tax excluded
    BDT 0 Tax
    BDT 240 Tax included
    Quantity
    Last items in stock
    3 Items

    97 people have purchased this item
    6 people recently added this item to the cart
    Only 3 items left in stock
    Description

    This expansion board as a driver expansion board, can be used for engraving machines, 3D printers, CNC. It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors.

    The CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board is very convenient to use. RoboticsBD

    After insert Arduino CNC Shield V3.0 into Arduino UNO, and installed GRBL firmware then you can quickly DIY a CNC engraving machine. Featured By RoboticsBD.

    Product Images are shown for illustrative purposes only and may differ from the actual product.

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    To buy A4988 and DRV8825 Stepper Motor Drivers click on the respective name below, RoboticsBD

    A4988
    DRV8825

    Features :

    1. Coolant enable
    2. Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others) (Not Included)
    3. Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
    4. Compact design.
    5. Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
    6. Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
    7. Please note that this is an unassembled kit and needs soldering.
    8. Latest Arduino CNC Shield Version 3.10
    9. GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
    10. PWM Spindle and direction pins
    11. 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
    12. 2 x End stops for each axis (6 in total)

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    General Specification
    Length (mm)68
    Width (mm)52
    Height (mm)18
    Weight (gm)30
    Shipment Weight0.033 kg
    Shipment Dimensions8 × 7 × 3 cm

    Please allow 5% measuring deviation due to manual measurement.

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    Documentation :

    1. CNC Shield Guide
    2. 3-Axis CNC/Stepper Motor Shield for Arduino
    3. CNC Shield & Arduino Laser Upgrade - Wiring Setup

    Package Includes :

    1 x Arduino CNC Shield V3

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

    Product Details
    RBD-1065
    3 Items

    Specific References

    EAN13
    1065
    Comments (0)
    Grade
    No customer reviews for the moment.
    16 other products in the same category:
    HLK-LD1115H 24Ghz Human Presence Sensor mmWave Radar Module Robotics Bangladesh HLK-LD1115H 24Ghz Human Presence Sensor mmWave Radar Module Robotics Bangladesh

    Reference: RBD-2227

    Brand: Hi-Link

    HLK-LD1115H 24Ghz Human Presence Sensor mmWave Radar Module

    (0)
    High sensitivity 24GHz millimeter wave human presence detection radar module Detects and accumulates small movements like human breathing Higher accuracy in presence detection within a certain range Not easy to miss detections Detection distance: > 4m static human presence, > 16m motion Range: Hanging height 3m, static body detection coverage radius...
    BDT 1,850
    BDT 1,850 tax incl.
    BDT 1,850 tax excl.
    BDT 1,850 tax excl.
    BDT 1,850 tax incl.
    BDT 1,850 tax incl.
    BDT 0 Tax
    BDT 1,850 tax excl.
    BDT 1,850 tax excl.
    BDT 0 Tax
    BDT 1,850 tax incl.
    More HLK-LD1115H 24Ghz Human Presence Sensor mmWave Radar Module
    In-Stock
    In stock: 23
    ESP8266 ESP-01 ESP-01S DHT11 Temperature and Humidity WiFi IOT Sensor Node Robotics Bangladesh

    Reference: RBD-2892

    ESP8266 ESP-01 ESP-01S DHT11 Temperature and Humidity WiFi IOT Sensor Node

    (0)
    WiFi-enabled IoT sensor node powered by ESP8266 ESP-01/ESP-01S Integrated DHT11 sensor for temperature and humidity monitoring Supports 3.7V–12V DC power supply (including 3.7V Li-ion battery) Uploads real-time environmental data to a server via WiFi Compact, low-cost, and easy-to-integrate design for smart projects Perfect for IoT, smart home automation,...
    BDT 350
    BDT 350 tax incl.
    BDT 350 tax excl.
    BDT 350 tax excl.
    BDT 350 tax incl.
    BDT 350 tax incl.
    BDT 0 Tax
    BDT 350 tax excl.
    BDT 350 tax excl.
    BDT 0 Tax
    BDT 350 tax incl.
    More ESP8266 ESP-01 ESP-01S DHT11 Temperature and Humidity WiFi IOT Sensor Node
    In-Stock
    In stock: 48
    1.2-34V 5A Dc-dc Step-down CC/CV Xl4015 Battery Charger Led Driver With Volt, Amp & Power Meter Robotics Bangladesh

    Reference: RBD-2466

    1.2-34V 5A Dc-dc Step-down CC/CV Xl4015 Battery Charger Led Driver With Volt, Amp & Power Meter

    (0)
    XL4015 DC-DC step-down buck converter with CV/CC control Adjustable output: 1.2V–34V, up to 5A load (4A continuous) Built-in digital meter for voltage, current & power monitoring High efficiency, low ripple, and stable line/load regulation Ideal for battery charging, LED/laser driving & DIY power supplies Compact module with versatile applications...
    BDT 450
    BDT 450 tax incl.
    BDT 450 tax excl.
    BDT 450 tax excl.
    BDT 450 tax incl.
    BDT 450 tax incl.
    BDT 0 Tax
    BDT 450 tax excl.
    BDT 450 tax excl.
    BDT 0 Tax
    BDT 450 tax incl.
    More 1.2-34V 5A Dc-dc Step-down CC/CV Xl4015 Battery Charger Led Driver With Volt, Amp & Power Meter
    In-Stock
    In stock: 70
    5A Adjustable Step Down CC / CV Module Robotics Bangladesh

    Reference: RBD-2459

    5A Adjustable Step Down CC / CV Module

    (0)
    Compact XL4015-based DC-DC buck converter with current & voltage control Built-in LED display for real-time voltage and current monitoring Adjustable output voltage (0.8V – 29V) and current limit setting Handles up to 5A with cooling (3A without cooling) Wide input voltage range: 5V – 30V, ideal for battery charging, LED driving, or lab supply use...
    BDT 680
    BDT 680 tax incl.
    BDT 680 tax excl.
    BDT 680 tax excl.
    BDT 680 tax incl.
    BDT 680 tax incl.
    BDT 0 Tax
    BDT 680 tax excl.
    BDT 680 tax excl.
    BDT 0 Tax
    BDT 680 tax incl.
    More 5A Adjustable Step Down CC / CV Module
    In-Stock
    In stock: 23
    XH-M203 Automatic Water Level Controller Module Robotics Bangladesh XH-M203 Automatic Water Level Controller Module Robotics Bangladesh

    Reference: RBD-3324

    XH-M203 Automatic Water Level Controller Module

    (0)
    XH-M203 Automatic Water Level Controller for tanks, pools, and reservoirs Fully automatic pump control — switches ON/OFF based on water level detection Dual-probe system for accurate high and low-level sensing Built-in 10A relay output compatible with AC/DC pumps and valves Operates on a wide voltage range (12V–40V) for flexible applications LED...
    BDT 450
    BDT 450 tax incl.
    BDT 450 tax excl.
    BDT 450 tax excl.
    BDT 450 tax incl.
    BDT 450 tax incl.
    BDT 0 Tax
    BDT 450 tax excl.
    BDT 450 tax excl.
    BDT 0 Tax
    BDT 450 tax incl.
    More XH-M203 Automatic Water Level Controller Module
    In-Stock
    In stock: 19
    Nextion NX3224T024 - Generic 2.4" TFT LCD Touch Display Robotics Bangladesh

    Reference: RBD-1217

    Nextion NX3224T024 - Generic 2.4" TFT LCD Touch Display

    (0)
    Nextion is a seamless Human Machine Interface (HMI) solution. Nextion provides a control and visualization interface between a human and a process, machine, application or appliance.  Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field.
    BDT 3,099
    BDT 3,099 tax incl.
    BDT 3,099 tax excl.
    BDT 3,099 tax excl.
    BDT 3,099 tax incl.
    BDT 3,099 tax incl.
    BDT 0 Tax
    BDT 3,099 tax excl.
    BDT 3,099 tax excl.
    BDT 0 Tax
    BDT 3,099 tax incl.
    More Nextion NX3224T024 - Generic 2.4" TFT LCD Touch Display
    In-Stock
    In stock: 8
    Vibration Switch Module Robotics Bangladesh Vibration Switch Module Robotics Bangladesh

    Reference: RBD-2078

    Vibration Switch Module

    (0)
    No direction, any angle can trigger the work. Sensitivity switches can be selected for the trigger sensitivity according to circuit requirements. This switch is suitable for the trigger of the small current circuit. Component Type: SW-18015P Maximum voltage: 12V Rated Heating Current: 20mA
    BDT 45
    BDT 45 tax incl.
    BDT 45 tax excl.
    BDT 45 tax excl.
    BDT 45 tax incl.
    BDT 45 tax incl.
    BDT 0 Tax
    BDT 45 tax excl.
    BDT 45 tax excl.
    BDT 0 Tax
    BDT 45 tax incl.
    More Vibration Switch Module
    In-Stock
    In stock: 63
    2.42 inch OLED Screen LCD Display Module 128x64 SSD1309 SPI 7Pin White Robotics Bangladesh 2.42 inch OLED Screen LCD Display Module 128x64 SSD1309 SPI 7Pin White Robotics Bangladesh

    Reference: RBD-2920

    2.42 inch OLED Screen LCD Display Module 128x64 SSD1309 SPI 7Pin White

    (0)
    2.42-inch OLED display module with sharp 128×64 pixel resolution Powered by the SSD1309 driver IC with SPI communication (7-pin interface) Wide compatibility with Arduino, Raspberry Pi, STM32, ESP32, Jetson Nano Ultra-narrow bezel and compact design, ideal for graphical projects Onboard voltage translator ensures stable performance at 3.3V Crisp white...
    BDT 1,690
    BDT 1,690 tax incl.
    BDT 1,690 tax excl.
    BDT 1,690 tax excl.
    BDT 1,690 tax incl.
    BDT 1,690 tax incl.
    BDT 0 Tax
    BDT 1,690 tax excl.
    BDT 1,690 tax excl.
    BDT 0 Tax
    BDT 1,690 tax incl.
    More 2.42 inch OLED Screen LCD Display Module 128x64 SSD1309 SPI 7Pin White
    In-Stock
    In stock: 7
    INA219 DC Current Measurement Module Robotics Bangladesh

    Reference: RBD-2735

    INA219 DC Current Measurement Module

    (0)
    INA219 DC current and voltage measurement module with I2C interface Measures high-side current up to 3.2A with 0.8mA resolution Supports load voltages from 0–26VDC Powered by 3–5V, compatible with both 3.3V and 5V logic MCUs Integrated 0.1Ω shunt resistor ensures accurate measurements Adjustable I2C address for multiple modules on the same bus
    BDT 219
    BDT 219 tax incl.
    BDT 219 tax excl.
    BDT 219 tax excl.
    BDT 219 tax incl.
    BDT 219 tax incl.
    BDT 0 Tax
    BDT 219 tax excl.
    BDT 219 tax excl.
    BDT 0 Tax
    BDT 219 tax incl.
    More INA219 DC Current Measurement Module
    In-Stock
    In stock: 56
    USB Load Resistance Current Voltage Tester - 5W to 10W Discharge Resistor Robotics Bangladesh

    Reference: RBD-3137

    USB Load Resistance Current Voltage Tester - 5W to 10W Discharge Resistor

    (0)
    USB load tester designed for checking charger and power bank output performance Adjustable discharge current between 1A and 2A for flexible testing needs Rated power 5W to 10W, simulating real load conditions Plug-and-play USB interface with convenient on/off switch control Durable ceramic resistor design ensures stable and long-term use Ideal for...
    BDT 190
    BDT 190 tax incl.
    BDT 190 tax excl.
    BDT 190 tax excl.
    BDT 190 tax incl.
    BDT 190 tax incl.
    BDT 0 Tax
    BDT 190 tax excl.
    BDT 190 tax excl.
    BDT 0 Tax
    BDT 190 tax incl.
    More USB Load Resistance Current Voltage Tester - 5W to 10W Discharge Resistor
    In-Stock
    In stock: 4
    LilyPad Coin Cell CR2032 Battery Holder Switched - 20mm Robotics Bangladesh

    Reference: RBD-2042

    LilyPad Coin Cell CR2032 Battery Holder Switched - 20mm

    (0)
    Model: LilyPad Color: Purple Material: CCL Dimensions: 30 x 30 x 6 (LxWxH) mm. Weight: 3 gm.
    BDT 180
    BDT 180 tax incl.
    BDT 180 tax excl.
    BDT 180 tax excl.
    BDT 180 tax incl.
    BDT 180 tax incl.
    BDT 0 Tax
    BDT 180 tax excl.
    BDT 180 tax excl.
    BDT 0 Tax
    BDT 180 tax incl.
    More LilyPad Coin Cell CR2032 Battery Holder Switched - 20mm
    In-Stock
    In stock: 15
    MAX7219 8 Digit Led Tube Display Control Module Robotics Bangladesh

    Reference: RBD-2454

    MAX7219 8 Digit Led Tube Display Control Module

    (0)
    MAX7219 8-Digit 7-Segment LED display driver module for Arduino & microcontrollers Serial input/output common-cathode driver with 8-digit LED display control Requires only 3 I/O pins (DIN, CS, CLK) to control full 8-digit display Compatible with both 5V and 3.3V microcontrollers (Arduino, ESP32, STM32, etc.) Supports flicker-free display and cascading...
    BDT 220
    BDT 220 tax incl.
    BDT 220 tax excl.
    BDT 220 tax excl.
    BDT 220 tax incl.
    BDT 220 tax incl.
    BDT 0 Tax
    BDT 220 tax excl.
    BDT 220 tax excl.
    BDT 0 Tax
    BDT 220 tax incl.
    More MAX7219 8 Digit Led Tube Display Control Module
    In-Stock
    In stock: 5
    - BDT 10 Reduced price Digispark Pro - ATtiny167 with Micro USB Robotics Bangladesh Digispark Pro - ATtiny167 with Micro USB Robotics Bangladesh

    Reference: RBD-1809

    Digispark Pro - ATtiny167 with Micro USB

    (0)
    Digispark Pro  ATtiny167  Micro USB 16MHz
    BDT 539 BDT 549
    BDT 549 BDT 539 tax incl.
    BDT 549 BDT 539 tax excl.
    BDT 549 BDT 539 tax excl.
    BDT 549 BDT 539 tax incl.
    BDT 549 BDT 539 tax incl.
    BDT 0 BDT 0 Tax
    BDT 549 BDT 539 tax excl.
    BDT 549 BDT 539 tax excl.
    BDT 0 BDT 0 Tax
    BDT 549 BDT 539 tax incl.
    More Digispark Pro - ATtiny167 with Micro USB
    In-Stock
    In stock: 24
    Dry Reed Pipe Magnetron Magnetic switch Module Robotics Bangladesh Dry Reed Pipe Magnetron Magnetic switch Module Robotics Bangladesh

    Reference: RBD-2080

    Dry Reed Pipe Magnetron Magnetic switch Module

    (0)
    Clean, good waveform driving ability, more than 15mA. Working voltage 3.3V-5 Output format: digital switching output (0 and 1) A  fixed bolt holes for easy installation
    BDT 99
    BDT 99 tax incl.
    BDT 99 tax excl.
    BDT 99 tax excl.
    BDT 99 tax incl.
    BDT 99 tax incl.
    BDT 0 Tax
    BDT 99 tax excl.
    BDT 99 tax excl.
    BDT 0 Tax
    BDT 99 tax incl.
    More Dry Reed Pipe Magnetron Magnetic switch Module
    In-Stock
    In stock: 67
    Sold-out Raspberry Pi 3 Robot Shield Expansion Board Pioneer 600 Robotics Bangladesh Raspberry Pi 3 Robot Shield Expansion Board Pioneer 600 Robotics Bangladesh

    Reference: RBD-0270

    Raspberry Pi 3 Robot Shield Expansion Board Pioneer 600

    (0)
    AD/DA IO interface : screw terminal 1-WIRE interface : for connecting 1-WIRE devices like DS18B20 Sensor interface : for connecting various sensors 0.96inch OLED : SSD1306 driver, 128×64 resolution, SPI interface Buzzer CP2102 : USB TO UART converter PCF8591 : 8-bit AD/DA converter, I2C interface
    BDT 3,400
    BDT 3,400 tax incl.
    BDT 3,400 tax excl.
    BDT 3,400 tax excl.
    BDT 3,400 tax incl.
    BDT 3,400 tax incl.
    BDT 0 Tax
    BDT 3,400 tax excl.
    BDT 3,400 tax excl.
    BDT 0 Tax
    BDT 3,400 tax incl.
    More Raspberry Pi 3 Robot Shield Expansion Board Pioneer 600
    Sold-out
    In stock: 0
    CNC Shield V4 Engraving Machine Expansion Board for Arduino Nano Robotics Bangladesh CNC Shield V4 Engraving Machine Expansion Board for Arduino Nano Robotics Bangladesh

    Reference: RBD-3104

    CNC Shield V4 Engraving Machine Expansion Board for Arduino Nano

    (0)
    CNC Shield V4 expansion board designed for Arduino Nano Supports 3-axis stepper motor control with A4988 driver modules (not included) GRBL compatible, ideal for engraving machines and 3D printers Works with two-phase four-wire stepper motors up to 2A Provides easy connection for endstops, I2C modules, and LCDs Compact design with 7.5–12V input and DC 5V...
    BDT 450
    BDT 450 tax incl.
    BDT 450 tax excl.
    BDT 450 tax excl.
    BDT 450 tax incl.
    BDT 450 tax incl.
    BDT 0 Tax
    BDT 450 tax excl.
    BDT 450 tax excl.
    BDT 0 Tax
    BDT 450 tax incl.
    More CNC Shield V4 Engraving Machine Expansion Board for Arduino Nano
    In-Stock
    In stock: 21
    - BDT 60 Reduced price A4988 StepStick Stepper Motor Driver Module Robotics Bangladesh A4988 StepStick Stepper Motor Driver Module Robotics Bangladesh

    Reference: RBD-0435

    A4988 StepStick Stepper Motor Driver Module

    (0)
    Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
    BDT 105 BDT 165
    BDT 165 BDT 105 tax incl.
    BDT 165 BDT 105 tax excl.
    BDT 165 BDT 105 tax excl.
    BDT 165 BDT 105 tax incl.
    BDT 165 BDT 105 tax incl.
    BDT 0 BDT 0 Tax
    BDT 165 BDT 105 tax excl.
    BDT 165 BDT 105 tax excl.
    BDT 0 BDT 0 Tax
    BDT 165 BDT 105 tax incl.
    More A4988 StepStick Stepper Motor Driver Module
    In-Stock
    In stock: 18
    Arduino Uno R3 Robotics Bangladesh Arduino Uno R3 Robotics Bangladesh

    Reference: RBD-0094

    Arduino Uno R3

    (0)
    The Arduino Uno R3 High-Quality Edition Arduino UNO in BangladeshMicro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6. The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...
    BDT 988
    BDT 988 tax incl.
    BDT 988 tax excl.
    BDT 988 tax excl.
    BDT 988 tax incl.
    BDT 988 tax incl.
    BDT 0 Tax
    BDT 988 tax excl.
    BDT 988 tax excl.
    BDT 0 Tax
    BDT 988 tax incl.
    More Arduino Uno R3
    In-Stock
    In stock: 480
    Nema 17 Stepper Motor 17HS4401S Robotics Bangladesh

    Reference: RBD-1390

    Nema 17 Stepper Motor 17HS4401S

    (0)
    Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.
    BDT 1,390
    BDT 1,390 tax incl.
    BDT 1,390 tax excl.
    BDT 1,390 tax excl.
    BDT 1,390 tax incl.
    BDT 1,390 tax incl.
    BDT 0 Tax
    BDT 1,390 tax excl.
    BDT 1,390 tax excl.
    BDT 0 Tax
    BDT 1,390 tax incl.
    More Nema 17 Stepper Motor 17HS4401S
    In-Stock
    In stock: 13
    - BDT 35 Reduced price DRV8825 Stepper Motor Driver Module Robotics Bangladesh DRV8825 Stepper Motor Driver Module Robotics Bangladesh

    Reference: RBD-0434

    DRV8825 Stepper Motor Driver Module

    (0)
    Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm. RoboticsBD
    BDT 159 BDT 194
    BDT 194 BDT 159 tax incl.
    BDT 194 BDT 159 tax excl.
    BDT 194 BDT 159 tax excl.
    BDT 194 BDT 159 tax incl.
    BDT 194 BDT 159 tax incl.
    BDT 0 BDT 0 Tax
    BDT 194 BDT 159 tax excl.
    BDT 194 BDT 159 tax excl.
    BDT 0 BDT 0 Tax
    BDT 194 BDT 159 tax incl.
    More DRV8825 Stepper Motor Driver Module
    In-Stock
    In stock: 67
    - BDT 14 Reduced price Servo Motor Micro SG90 180 Degree Rotation Robotics Bangladesh Servo Motor Micro SG90 180 Degree Rotation Robotics Bangladesh

    Reference: RBD-0020

    Servo Motor Micro SG90 180 Degree Rotation

    (0)
    Model: SG90 Weight: 9 gm Operating voltage: 3.0V~ 7.2V Servo Plug: JR Stall torque @4.8V : 1.2kg-cm Stall torque @6.6V : 1.6kg-cm Note: Product images/ Components brand may vary from actual product as our stock rotates.
    BDT 129 BDT 143
    BDT 143 BDT 129 tax incl.
    BDT 143 BDT 129 tax excl.
    BDT 143 BDT 129 tax excl.
    BDT 143 BDT 129 tax incl.
    BDT 143 BDT 129 tax incl.
    BDT 0 BDT 0 Tax
    BDT 143 BDT 129 tax excl.
    BDT 143 BDT 129 tax excl.
    BDT 0 BDT 0 Tax
    BDT 143 BDT 129 tax incl.
    More Servo Motor Micro SG90 180 Degree Rotation
    In-Stock
    In stock: 1505
    - BDT 91 On sale! Reduced price Arduino Uno R3 Robotics Bangladesh Arduino Uno R3 Robotics Bangladesh

    Reference: RBD-2335

    Arduino Uno R3

    (0)
    The Arduino Uno R3 Standard-Quality Edition Micro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6 We are pleased to present a more cost-effective version of the Arduino Uno R3, a widely acclaimed and versatile platform for electronics...
    BDT 599 BDT 690
    BDT 690 BDT 599 tax incl.
    BDT 690 BDT 599 tax excl.
    BDT 690 BDT 599 tax excl.
    BDT 690 BDT 599 tax incl.
    BDT 690 BDT 599 tax incl.
    BDT 0 BDT 0 Tax
    BDT 690 BDT 599 tax excl.
    BDT 690 BDT 599 tax excl.
    BDT 0 BDT 0 Tax
    BDT 690 BDT 599 tax incl.
    More Arduino Uno R3
    In-Stock
    In stock: 345
    - BDT 41 Reduced price Sold-out Servo Motor Micro MG90S 180 Degree Rotation Robotics Bangladesh Servo Motor Micro MG90S 180 Degree Rotation Robotics Bangladesh

    Reference: RBD-0217

    Servo Motor Micro MG90S 180 Degree Rotation

    (0)
    Model: MG90S Weight: 13 gm Operating voltage: 4.8V~ 6.6V Servo Plug: JR Stall torque @4.8V : 1.8kg-cm Stall torque @6.6V : 2.2kg-cm Note: The component, colour & shape of the motor may vary depending on our stock rotation.
    BDT 209 BDT 250
    BDT 250 BDT 209 tax incl.
    BDT 250 BDT 209 tax excl.
    BDT 250 BDT 209 tax excl.
    BDT 250 BDT 209 tax incl.
    BDT 250 BDT 209 tax incl.
    BDT 0 BDT 0 Tax
    BDT 250 BDT 209 tax excl.
    BDT 250 BDT 209 tax excl.
    BDT 0 BDT 0 Tax
    BDT 250 BDT 209 tax incl.
    More Servo Motor Micro MG90S 180 Degree Rotation
    Sold-out
    In stock: 0
    Servo Motor Micro MG90S 360 Degree Continuous Rotation Robotics Bangladesh Servo Motor Micro MG90S 360 Degree Continuous Rotation Robotics Bangladesh

    Reference: RBD-2360

    Servo Motor Micro MG90S 360 Degree Continuous Rotation

    (0)
    360° Continuous rotation servo for speed control and direction-based movement. Compact and lightweight design with integrated motor driver for robotic applications. Operates within 4.8V-6.6V range, providing a torque of up to 2.2kg-cm at 6.6V. Note: The component, colour & shape of the motor may vary depending on our stock rotation.Continuous...
    BDT 220
    BDT 220 tax incl.
    BDT 220 tax excl.
    BDT 220 tax excl.
    BDT 220 tax incl.
    BDT 220 tax incl.
    BDT 0 Tax
    BDT 220 tax excl.
    BDT 220 tax excl.
    BDT 0 Tax
    BDT 220 tax incl.
    More Servo Motor Micro MG90S 360 Degree Continuous Rotation
    In-Stock
    In stock: 171
    You might also like
    - BDT 30 Reduced price 3D Printer Controller for RAMPS 1.4 REPRAP MENDEL PRUSA Robotics Bangladesh 3D Printer Controller for RAMPS 1.4 REPRAP MENDEL PRUSA Robotics Bangladesh

    Reference: RBD-0436

    3D Printer Controller for RAMPS 1.4 REPRAP MENDEL PRUSA

    (0)
    Supply Voltage: 12V Standard interfaces (as that of the extruder) Reserved GCI like I2C and RS232 3 MOSFET’s are applied to the heater/ fan and thermistor circuit. Another 5A added to protect the component parts. An 11A fuse is added to the hotbed. Support 5 stepper drive board
    BDT 670 BDT 700
    BDT 700 BDT 670 tax incl.
    BDT 700 BDT 670 tax excl.
    BDT 700 BDT 670 tax excl.
    BDT 700 BDT 670 tax incl.
    BDT 700 BDT 670 tax incl.
    BDT 0 BDT 0 Tax
    BDT 700 BDT 670 tax excl.
    BDT 700 BDT 670 tax excl.
    BDT 0 BDT 0 Tax
    BDT 700 BDT 670 tax incl.
    More 3D Printer Controller for RAMPS 1.4 REPRAP MENDEL PRUSA
    In-Stock
    In stock: 7
    5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3 Robotics Bangladesh 5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3 Robotics Bangladesh

    Reference: RBD-0565

    5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3

    (0)
    Compatible with MACH3, Linux CNC (EMC2) etc. parallel-control CNC software. USB power supply and peripherals power phase are separate to protect computer security. All the signals are to-isolate which can protect your computer security. 5-input interface to define the Limit, Emergence-Stop, Cutter alignment, etc. Wide input voltage range: 12-24V, and with...
    BDT 3,500
    BDT 3,500 tax incl.
    BDT 3,500 tax excl.
    BDT 3,500 tax excl.
    BDT 3,500 tax incl.
    BDT 3,500 tax incl.
    BDT 0 Tax
    BDT 3,500 tax excl.
    BDT 3,500 tax excl.
    BDT 0 Tax
    BDT 3,500 tax incl.
    More 5 axis CNC Breakout Board with optical coupler For Stepper Motor Driver MACH3
    In-Stock
    In stock: 11
    - BDT 60 Reduced price A4988 StepStick Stepper Motor Driver Module Robotics Bangladesh A4988 StepStick Stepper Motor Driver Module Robotics Bangladesh

    Reference: RBD-0435

    A4988 StepStick Stepper Motor Driver Module

    (0)
    Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
    BDT 105 BDT 165
    BDT 165 BDT 105 tax incl.
    BDT 165 BDT 105 tax excl.
    BDT 165 BDT 105 tax excl.
    BDT 165 BDT 105 tax incl.
    BDT 165 BDT 105 tax incl.
    BDT 0 BDT 0 Tax
    BDT 165 BDT 105 tax excl.
    BDT 165 BDT 105 tax excl.
    BDT 0 BDT 0 Tax
    BDT 165 BDT 105 tax incl.
    More A4988 StepStick Stepper Motor Driver Module
    In-Stock
    In stock: 18
    - BDT 100 Reduced price Arduino Mega 2560 R3 Robotics Bangladesh Arduino Mega 2560 R3 Robotics Bangladesh

    Reference: RBD-0009

    Arduino Mega 2560 R3

    (0)
    54 Digital I/O terminals (14 of which have programmable PWM outputs). 16 Analog Inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock. RoboticsBD Operating voltage: 6 ~ 12v. Dimensions: 110 x 53 x 15 mm.
    BDT 1,788 BDT 1,888
    BDT 1,888 BDT 1,788 tax incl.
    BDT 1,888 BDT 1,788 tax excl.
    BDT 1,888 BDT 1,788 tax excl.
    BDT 1,888 BDT 1,788 tax incl.
    BDT 1,888 BDT 1,788 tax incl.
    BDT 0 BDT 0 Tax
    BDT 1,888 BDT 1,788 tax excl.
    BDT 1,888 BDT 1,788 tax excl.
    BDT 0 BDT 0 Tax
    BDT 1,888 BDT 1,788 tax incl.
    More Arduino Mega 2560 R3
    In-Stock
    In stock: 6
    Arduino Uno R3 Robotics Bangladesh Arduino Uno R3 Robotics Bangladesh

    Reference: RBD-0094

    Arduino Uno R3

    (0)
    The Arduino Uno R3 High-Quality Edition Arduino UNO in BangladeshMicro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6. The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...
    BDT 988
    BDT 988 tax incl.
    BDT 988 tax excl.
    BDT 988 tax excl.
    BDT 988 tax incl.
    BDT 988 tax incl.
    BDT 0 Tax
    BDT 988 tax excl.
    BDT 988 tax excl.
    BDT 0 Tax
    BDT 988 tax incl.
    More Arduino Uno R3
    In-Stock
    In stock: 480
    - BDT 35 Reduced price DRV8825 Stepper Motor Driver Module Robotics Bangladesh DRV8825 Stepper Motor Driver Module Robotics Bangladesh

    Reference: RBD-0434

    DRV8825 Stepper Motor Driver Module

    (0)
    Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm. RoboticsBD
    BDT 159 BDT 194
    BDT 194 BDT 159 tax incl.
    BDT 194 BDT 159 tax excl.
    BDT 194 BDT 159 tax excl.
    BDT 194 BDT 159 tax incl.
    BDT 194 BDT 159 tax incl.
    BDT 0 BDT 0 Tax
    BDT 194 BDT 159 tax excl.
    BDT 194 BDT 159 tax excl.
    BDT 0 BDT 0 Tax
    BDT 194 BDT 159 tax incl.
    More DRV8825 Stepper Motor Driver Module
    In-Stock
    In stock: 67
    Nema 17 Stepper Motor 17HS4401S Robotics Bangladesh

    Reference: RBD-1390

    Nema 17 Stepper Motor 17HS4401S

    (0)
    Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.
    BDT 1,390
    BDT 1,390 tax incl.
    BDT 1,390 tax excl.
    BDT 1,390 tax excl.
    BDT 1,390 tax incl.
    BDT 1,390 tax incl.
    BDT 0 Tax
    BDT 1,390 tax excl.
    BDT 1,390 tax excl.
    BDT 0 Tax
    BDT 1,390 tax incl.
    More Nema 17 Stepper Motor 17HS4401S
    In-Stock
    In stock: 13

    Follow us on Facebook

    Facebook