Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 3.00 - BDT 28,900.00

Categories

Categories

Jumper Wire Type

Jumper Wire Type

Brand

Brand

Weight

Weight

  • 0 kg - 2,078 kg

Resistor Pack of 5

Resistor Pack of 5

  • Banner

Active filters
  • Categories: Arduino Boards
  • Categories: Arduino Shield & Module
  • Categories: Back in Stock
  • Categories: Enclosure

Reference: RBD-0334

9 Degrees of Freedom Breakout- MPU9150

(0)
The 9DOF MPU-9150 is the world’s first 9-axis MotionTracking MEMS device designed for the low power, low cost, and high performance requirements of consumer electronics equipment including smartphones, tablets and wearable sensors. And guess what? You get to play with it.
BDT 2,000.00
BDT 2,000.00 tax incl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax incl.
BDT 2,000.00 tax incl.
BDT 0.00 Tax
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 0.00 Tax
BDT 2,000.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-1828

Argon ONE M.2 Case for Raspberry Pi 4

(0)
Sleek aluminum alloy enclosure Plastic base for excellent Wi-Fi signal strength Easy installation with magnetic removable top Easily accessible GPIO with color-coded pinouts M.2 SATA SSD NOT INCLUDED
BDT 6,990.00
BDT 6,990.00 tax incl.
BDT 6,990.00 tax excl.
BDT 6,990.00 tax excl.
BDT 6,990.00 tax incl.
BDT 6,990.00 tax incl.
BDT 0.00 Tax
BDT 6,990.00 tax excl.
BDT 6,990.00 tax excl.
BDT 0.00 Tax
BDT 6,990.00 tax incl.
More
Out-of-Stock
In stock: -7

Reference: RBD-1542

A2212 1400KV Brushless Outrunner BLDC Motor

(0)
Model: A2212/10T Motor KV: 1400 Max. Efficiency Current: 6-12A No Load Current: 0.7A @10V Current Capacity: 16A/60S LiPO Batteries: 2S-3S
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
In-Stock
In stock: 37

Reference: RBD-0987

Arduino NANO I/O Extension Shield

(0)
Compatible with Arduino NANO All digital and analog pins breakout Compact size; External power supply current support Leads all pins out, convenient for wiring and doing experiments.
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 37

Reference: RBD-0337

Brand: Waveshare

Liquid Level Sensor for Arduino (WaveShare)

(0)
Detection depth: 48mm Power: 2.0V ~ 5.0V Dimension: 19.0mm * 63.0mm Mounting holes size: 2.0mm
BDT 499.00
BDT 499.00 tax incl.
BDT 499.00 tax excl.
BDT 499.00 tax excl.
BDT 499.00 tax incl.
BDT 499.00 tax incl.
BDT 0.00 Tax
BDT 499.00 tax excl.
BDT 499.00 tax excl.
BDT 0.00 Tax
BDT 499.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-2159

Thermoelectric Peltier Refrigeration Cooling System DIY Kit

(0)
Using GL style of the refrigerator, effectively release the thermal deformation ability of the refrigerator produce at work. Small volume, does not occupy space, installation is simple. It can be used as a Pet Air Conditioner (chicken, little dog, etc.) or a little fridge. Lightweight, small size and easier to install. The kit does not include...
BDT 1,190.00
BDT 1,190.00 tax incl.
BDT 1,190.00 tax excl.
BDT 1,190.00 tax excl.
BDT 1,190.00 tax incl.
BDT 1,190.00 tax incl.
BDT 0.00 Tax
BDT 1,190.00 tax excl.
BDT 1,190.00 tax excl.
BDT 0.00 Tax
BDT 1,190.00 tax incl.
More
In-Stock
In stock: 17

Reference: RBD-2126

Arduino Micro R3

(0)
Manufacturer: China Support TWI and SPI communication Input voltage (recommended) range from 7V to 12V Input Voltage (limit) range from 6V to 20V 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs) Onboard ATmega32u4 microcontroller with 32KB flash memory, 2.5KB SRAM and 1KB EEPROM
BDT 1,380.00
BDT 1,380.00 tax incl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax incl.
BDT 1,380.00 tax incl.
BDT 0.00 Tax
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 0.00 Tax
BDT 1,380.00 tax incl.
More
In-Stock
In stock: 24

Reference: RBD-0346

PN532 NFC RFID Read / Write Module V3 Kit

(0)
The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at...
BDT 820.00
BDT 820.00 tax incl.
BDT 820.00 tax excl.
BDT 820.00 tax excl.
BDT 820.00 tax incl.
BDT 820.00 tax incl.
BDT 0.00 Tax
BDT 820.00 tax excl.
BDT 820.00 tax excl.
BDT 0.00 Tax
BDT 820.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-1746

Neodymium Disc Magnet N35 - 10 x 1 mm

(0)
Neodymium Magnet Shape: Disc Actual Size - 10 x 1 mm Note: Magnet size may deviate by up to 5%. If you require precise dimensions, please contact our customer support for exact measurements.
BDT 15.00
BDT 15.00 tax incl.
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 15.00 tax incl.
BDT 15.00 tax incl.
BDT 0.00 Tax
BDT 15.00 tax excl.
BDT 15.00 tax excl.
BDT 0.00 Tax
BDT 15.00 tax incl.
More
In-Stock
In stock: 430

Reference: RBD-0348

Heart Rate Pulse Sensor Module For Arduino

(0)
A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required. The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything. Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting....
BDT 309.00
BDT 309.00 tax incl.
BDT 309.00 tax excl.
BDT 309.00 tax excl.
BDT 309.00 tax incl.
BDT 309.00 tax incl.
BDT 0.00 Tax
BDT 309.00 tax excl.
BDT 309.00 tax excl.
BDT 0.00 Tax
BDT 309.00 tax incl.
More
In-Stock
In stock: 100

Reference: RBD-0286

Arduino Uno R3 Bumper

(0)
3D Printed Arduino Uno R3 Bumper or base.Short Circuit Prevention: Safeguard your microcontroller against the risk of short circuits when placing it on a flat conductive surface. The bumper acts as a protective barrier, reducing the chances of accidental electrical contact. Note: Arduino Uno is not included
BDT 30.00 BDT 50.00
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax incl.
More
In stock
In stock: 14

Reference: RBD-0155

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328 Circuit Operating Voltage: 5V Clock frequency: 16MHz. Digital I/O Pins: 14 8 analog input port: A0 ~ A7. A pair of TTL level serial port transceiver : RX / TX. 6 PWM port: D3, D5, D6, D9, D10, D11. Support serial download.
BDT 680.00
BDT 680.00 tax incl.
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 680.00 tax incl.
BDT 680.00 tax incl.
BDT 0.00 Tax
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 0.00 Tax
BDT 680.00 tax incl.
More
In-Stock
In stock: 88

Reference: RBD-1745

Neodymium Bar Magnet N52 - 48.5 x 24 x 9 mm

(0)
Neodymium Magnet Grade N52 Actual Size - 48.5 x 24 x 9 mm Note: Magnet size may deviate by up to 5%. If you require precise dimensions, please contact our customer support for exact measurements.
BDT 620.00
BDT 620.00 tax incl.
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 620.00 tax incl.
BDT 620.00 tax incl.
BDT 0.00 Tax
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 0.00 Tax
BDT 620.00 tax incl.
More
In-Stock
In stock: 43

Reference: RBD-1523

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328P Circuit Operating Voltage: 5V Clock frequency: 16MHz. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. A pair of TTL level serial port transceiver : RX / TX.
BDT 430.00
BDT 430.00 tax incl.
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 430.00 tax incl.
BDT 430.00 tax incl.
BDT 0.00 Tax
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 0.00 Tax
BDT 430.00 tax incl.
More
In-Stock
In stock: 25

Reference: RBD-0353

0.96" Inch I2C OLED Display Yellow

(0)
Driver IC: SSD1306 Support wide voltage: 3.3V-5V DC Communication: IIC Working temperature: -30-80 degrees. RoboticsBD
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 22

Reference: RBD-0838

Arduino Pro Micro 5V/16MHz

(0)
ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD
BDT 870.00
BDT 870.00 tax incl.
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 870.00 tax incl.
BDT 870.00 tax incl.
BDT 0.00 Tax
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 0.00 Tax
BDT 870.00 tax incl.
More
In-Stock
In stock: 41

Reference: RBD-0493

RTD PT-100 Temperature Sensor 100mm Probe 0‑400℃

(0)
Temperature Range : 0C-400C Shield Material : Metal Total Length(Approx.) : 2M / 6.6 Ft; Weight : 46g;
BDT 1,150.00
BDT 1,150.00 tax incl.
BDT 1,150.00 tax excl.
BDT 1,150.00 tax excl.
BDT 1,150.00 tax incl.
BDT 1,150.00 tax incl.
BDT 0.00 Tax
BDT 1,150.00 tax excl.
BDT 1,150.00 tax excl.
BDT 0.00 Tax
BDT 1,150.00 tax incl.
More
In-Stock
In stock: 18

Reference: RBD-0384

MAX7219 Red Dot Matrix Module MCU Control Display Module DIY Kit For Arduino

(0)
Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 320 mA Display Dimensions: 32x32x6 (LxWxH) mm PCD Dimensions: 50×32 (LxW) mm Soldering is required
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 10

Reference: RBD-2053

Arduino Pro Micro 5V/16MHz Type-C

(0)
ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD
BDT 755.00
BDT 755.00 tax incl.
BDT 755.00 tax excl.
BDT 755.00 tax excl.
BDT 755.00 tax incl.
BDT 755.00 tax incl.
BDT 0.00 Tax
BDT 755.00 tax excl.
BDT 755.00 tax excl.
BDT 0.00 Tax
BDT 755.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-1577

KWSIC Folding Cordless Electric Drill Screwdriver Power Drill with 45 Bits Tool Set

(0)
45pcs in 1 electric screwdriver. RoboticsBD Non-slip rubber design of handle for comfortable to operate. Forward/reverse slide-driving to screw-removal.  Led working / charge indicator / battery capacity indicator light.  Foldable 180°  Torque: 3n.m  Comes with plastic storage box for easy transport.  Ideal for the iron, wood, steel and other materials of...
BDT 2,821.00
BDT 2,821.00 tax incl.
BDT 2,821.00 tax excl.
BDT 2,821.00 tax excl.
BDT 2,821.00 tax incl.
BDT 2,821.00 tax incl.
BDT 0.00 Tax
BDT 2,821.00 tax excl.
BDT 2,821.00 tax excl.
BDT 0.00 Tax
BDT 2,821.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-0386

Precision Real Time Clock Module DS3231 AT24C32 I2C

(0)
1 Hz output pin SQW. 32 KHz output pin 32K. RoboticsBD Voltage Supply: 2.2 V ~ 5.5 V (for RTC). Time Format: HH: MM: SS (12/24 hr). Date Format: YY-MM-DD-dd. DS 3231 based RTC with 2032 Battery Holder. RoboticsBD Battery is not included Note: Batteries not included.
BDT 260.00
BDT 260.00 tax incl.
BDT 260.00 tax excl.
BDT 260.00 tax excl.
BDT 260.00 tax incl.
BDT 260.00 tax incl.
BDT 0.00 Tax
BDT 260.00 tax excl.
BDT 260.00 tax excl.
BDT 0.00 Tax
BDT 260.00 tax incl.
More
In-Stock
In stock: 121

Reference: RBD-1972

Brand: DFRobot

Gravity: Analog AC Current Sensor (20A)

(0)
Brand Gravity Analog AC Current Sensor 20A AC Current Signal Conversion Module Open Type AC Transformer Probe Included Non-contact Measurement
BDT 3,250.00
BDT 3,250.00 tax incl.
BDT 3,250.00 tax excl.
BDT 3,250.00 tax excl.
BDT 3,250.00 tax incl.
BDT 3,250.00 tax incl.
BDT 0.00 Tax
BDT 3,250.00 tax excl.
BDT 3,250.00 tax excl.
BDT 0.00 Tax
BDT 3,250.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0387

Arduino SD card Module

(0)
All SD SPI pins output, MOSI, SCK, MISO, and CS. Support 5V/3.3V input. This module can handle 2GB SD cards. Size:4.7  x 3.1 cm. LED indicator. SD Card Holder. RoboticsBD Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output.
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0136

Arduino Due

(0)
Microcontroller: AT91SAM3X8E Operating Voltage: 3.3V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-16V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 (DAC) A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. CPU clock at 84Mhz 96KBytes of SRAM
BDT 3,990.00
BDT 3,990.00 tax incl.
BDT 3,990.00 tax excl.
BDT 3,990.00 tax excl.
BDT 3,990.00 tax incl.
BDT 3,990.00 tax incl.
BDT 0.00 Tax
BDT 3,990.00 tax excl.
BDT 3,990.00 tax excl.
BDT 0.00 Tax
BDT 3,990.00 tax incl.
More
In-Stock
In stock: 19

Reference: RBD-1809

Digispark Pro - ATtiny167 with Micro USB

(0)
Digispark Pro  ATtiny167  Micro USB 16MHz
BDT 539.00 BDT 549.00
BDT 549.00 BDT 539.00 tax incl.
BDT 549.00 BDT 539.00 tax excl.
BDT 549.00 BDT 539.00 tax excl.
BDT 549.00 BDT 539.00 tax incl.
BDT 549.00 BDT 539.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 549.00 BDT 539.00 tax excl.
BDT 549.00 BDT 539.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 549.00 BDT 539.00 tax incl.
More
In-Stock
In stock: 29

Reference: RBD-0389

PL2303 USB to TTL Serial Converter

(0)
Adopt imported controller PL2303HX, which can stabilize the flash with high speed 500mA self-recovery fuse for protection Two data transmission indicator can monitor data transfer status in real time Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power The entire board is coated by the high quality transparent...
BDT 98.00
BDT 98.00 tax incl.
BDT 98.00 tax excl.
BDT 98.00 tax excl.
BDT 98.00 tax incl.
BDT 98.00 tax incl.
BDT 0.00 Tax
BDT 98.00 tax excl.
BDT 98.00 tax excl.
BDT 0.00 Tax
BDT 98.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-0351

MIFARE Classic 1K RFID NFC Smart Card 13.56MHz Printable

(0)
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...
BDT 35.00
BDT 35.00 tax incl.
BDT 35.00 tax excl.
BDT 35.00 tax excl.
BDT 35.00 tax incl.
BDT 35.00 tax incl.
BDT 0.00 Tax
BDT 35.00 tax excl.
BDT 35.00 tax excl.
BDT 0.00 Tax
BDT 35.00 tax incl.
More
In-Stock
In stock: 3850

Reference: RBD-0270

Raspberry Pi 3 Robot Shield Expansion Board Pioneer 600

(0)
AD/DA IO interface : screw terminal 1-WIRE interface : for connecting 1-WIRE devices like DS18B20 Sensor interface : for connecting various sensors 0.96inch OLED : SSD1306 driver, 128×64 resolution, SPI interface Buzzer CP2102 : USB TO UART converter PCF8591 : 8-bit AD/DA converter, I2C interface
BDT 3,400.00
BDT 3,400.00 tax incl.
BDT 3,400.00 tax excl.
BDT 3,400.00 tax excl.
BDT 3,400.00 tax incl.
BDT 3,400.00 tax incl.
BDT 0.00 Tax
BDT 3,400.00 tax excl.
BDT 3,400.00 tax excl.
BDT 0.00 Tax
BDT 3,400.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0154

Arduino Leonardo R3

(0)
Microcontroller: ATmega32u4 Operating Voltage: 5V Input Voltage (Recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 20 PWM Channels: 7 Analog Input Channels: 12
BDT 790.00
BDT 790.00 tax incl.
BDT 790.00 tax excl.
BDT 790.00 tax excl.
BDT 790.00 tax incl.
BDT 790.00 tax incl.
BDT 0.00 Tax
BDT 790.00 tax excl.
BDT 790.00 tax excl.
BDT 0.00 Tax
BDT 790.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-2418

Professional Diamond Tester - Genuine

(0)
Professional diamond tester Fast and safe Intuitive design Simple to use
BDT 1,890.00
BDT 1,890.00 tax incl.
BDT 1,890.00 tax excl.
BDT 1,890.00 tax excl.
BDT 1,890.00 tax incl.
BDT 1,890.00 tax incl.
BDT 0.00 Tax
BDT 1,890.00 tax excl.
BDT 1,890.00 tax excl.
BDT 0.00 Tax
BDT 1,890.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0682

Arduino LilyPad 328 ATmega328P

(0)
Microcontroller: ATmega168 or ATmega328V Operating Voltage: 2.7-5.5 V Digital I/O Pins: 14 PWM Channels: 6 Analog Input Channels: 6 DC Current per I/O Pin: 40 mA Board will run from 2V to 5V. The latest version of the LilyPad supports automatic reset for even easier programming. The back side of the LilyPad is now completely flat! RoboticsBD
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 55

Follow us on Facebook