• Banner

Active filters
  • Categories: Arduino Boards
  • Categories: Display
  • Categories: Keypad /Touch/ Human Interface
  • Categories: RFID/ NFC

Reference: RBD-2281

13.56MHz RFID IC Key Tag

(0)
Material: ABS Dimension(LxWxH): 43.7×30.5×5.3mm Response Frequency: 13.56MHz Chip type: FM1108 Fudan Chip Memory capacity: 8 kbit Designed for the RFID 13.56MHz duplicator. can copy all the ID card, such as Access Card, District Card, Parking etc.
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 149

Reference: RBD-2199

NANO V3.0 Upgraded MH-Tiny ATTINY88 Micro Development Board 16MHz

(0)
Compatible with the Arduino IDE, making it easy for beginners to start using Smaller and cheaper than traditional Arduino boards Powered by a 16.0 MHz microcontroller Fully assembled except for headers, allowing for easy soldering Great for projects where size and cost are a concern Perfect for beginners to jump into electronics Can be used for a variety...
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 17

Reference: RBD-0305

3.5 inch RPi Display

(0)
LCD Type: TFT LCD Interface: SPI Touch Screen Type: Resistive Touch Screen Controller: XPT2046 Colors: 65536 Backlight: LED Resolution: 480*320 (Pixel) Dimensions: 84.91×56.54 (MM) Compatible with Raspberry Pi B, Raspberry Pi B+, Raspberry Pi 2 & Raspberry Pi 3
BDT 3,800.00
BDT 3,800.00 tax incl.
BDT 3,800.00 tax excl.
BDT 3,800.00 tax excl.
BDT 3,800.00 tax incl.
BDT 3,800.00 tax incl.
BDT 0.00 Tax
BDT 3,800.00 tax excl.
BDT 3,800.00 tax excl.
BDT 0.00 Tax
BDT 3,800.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-2372

RFID Reader Module 125KHz TK4100 RF UART IO Output Board For Access Control

(0)
This product is an ID card decoding module. After sensing the ID card, it will actively decode and output the 10-digit card number. It also has an output port that can output high and low levels, which can meet the requirements of general ID cards, such as reading, deleting, and registering. Card operation!
BDT 890.00
BDT 890.00 tax incl.
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 890.00 tax incl.
BDT 890.00 tax incl.
BDT 0.00 Tax
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 0.00 Tax
BDT 890.00 tax incl.
More
In stock
In stock: 27

Reference: RBD-0987

Arduino NANO I/O Extension Shield

(0)
Compatible with Arduino NANO All digital and analog pins breakout Compact size; External power supply current support Leads all pins out, convenient for wiring and doing experiments.
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 37

Reference: RBD-0353

0.96" Inch I2C OLED Display Yellow

(0)
Driver IC: SSD1306 Support wide voltage: 3.3V-5V DC Communication: IIC Working temperature: -30-80 degrees. RoboticsBD
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 22

Reference: RBD-2535

ZKTeco JC-880 Face Recognition Attendance Machine

(0)
Face recognition attendance machine Fingerprint recognition attendance machine Access control system Multi-language 2.8-inch color screen
BDT 19,799.00
BDT 19,799.00 tax incl.
BDT 19,799.00 tax excl.
BDT 19,799.00 tax excl.
BDT 19,799.00 tax incl.
BDT 19,799.00 tax incl.
BDT 0.00 Tax
BDT 19,799.00 tax excl.
BDT 19,799.00 tax excl.
BDT 0.00 Tax
BDT 19,799.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-2126

Arduino Micro R3

(0)
Manufacturer: China Support TWI and SPI communication Input voltage (recommended) range from 7V to 12V Input Voltage (limit) range from 6V to 20V 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs) Onboard ATmega32u4 microcontroller with 32KB flash memory, 2.5KB SRAM and 1KB EEPROM
BDT 1,380.00
BDT 1,380.00 tax incl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax incl.
BDT 1,380.00 tax incl.
BDT 0.00 Tax
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 0.00 Tax
BDT 1,380.00 tax incl.
More
In-Stock
In stock: 24

Reference: RBD-0384

MAX7219 Red Dot Matrix Module MCU Control Display Module DIY Kit For Arduino

(0)
Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 320 mA Display Dimensions: 32x32x6 (LxWxH) mm PCD Dimensions: 50×32 (LxW) mm Soldering is required
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 10

Reference: RBD-1347

TTP223 Capacitive Touch switch Digital Touch Sensor Module For Arduino

(0)
TTP223 Capacitive Touch switch Digital Touch Sensor Module for Arduino UNO DUE MEGA TTP223 capacitive touch single IC. Onboard level indicator. Working voltage: 2.0V to 5.5V.
BDT 120.00
BDT 120.00 tax incl.
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 120.00 tax incl.
BDT 120.00 tax incl.
BDT 0.00 Tax
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 0.00 Tax
BDT 120.00 tax incl.
More
In-Stock
In stock: 53

Reference: RBD-0399

Graphic LCD 84x48 (Nokia 5110) Black on White for Arduino

(0)
Power supply voltage: 2.7 V-3.3 V/5 V Data interface level: 2.7-5V. Resolution: 84 x 48 pixel Backlight power supply voltage: highest 3.3 V. Backlight: Blue. RoboticsBD Note: Current stock is tested by us. 
BDT 260.00
BDT 260.00 tax incl.
BDT 260.00 tax excl.
BDT 260.00 tax excl.
BDT 260.00 tax incl.
BDT 260.00 tax incl.
BDT 0.00 Tax
BDT 260.00 tax excl.
BDT 260.00 tax excl.
BDT 0.00 Tax
BDT 260.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0155

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328 Circuit Operating Voltage: 5V Clock frequency: 16MHz. Digital I/O Pins: 14 8 analog input port: A0 ~ A7. A pair of TTL level serial port transceiver : RX / TX. 6 PWM port: D3, D5, D6, D9, D10, D11. Support serial download.
BDT 680.00
BDT 680.00 tax incl.
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 680.00 tax incl.
BDT 680.00 tax incl.
BDT 0.00 Tax
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 0.00 Tax
BDT 680.00 tax incl.
More
In-Stock
In stock: 88

Reference: RBD-1523

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328P Circuit Operating Voltage: 5V Clock frequency: 16MHz. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. A pair of TTL level serial port transceiver : RX / TX.
BDT 430.00
BDT 430.00 tax incl.
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 430.00 tax incl.
BDT 430.00 tax incl.
BDT 0.00 Tax
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 0.00 Tax
BDT 430.00 tax incl.
More
In-Stock
In stock: 25

Reference: RBD-0401

LCD Module 8x2 Characters Display

(0)
Display: 8×2 character Outline: 58.0x32.0x10.0 VA: 37.8x16.0 Controller: SPLC780D Character: 2.96x5.56 Driver: 1/16
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 46

Reference: RBD-0838

Arduino Pro Micro 5V/16MHz

(0)
ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD
BDT 870.00
BDT 870.00 tax incl.
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 870.00 tax incl.
BDT 870.00 tax incl.
BDT 0.00 Tax
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 0.00 Tax
BDT 870.00 tax incl.
More
In-Stock
In stock: 41

Reference: RBD-0661

Standard LCD 16x2 Display Yellow Backlight

(0)
For Standard LCD 16x2 with Male Header. Press here For Standard LCD 16x2 with Female Header. Press here For Standard LCD 16x2 with I2C adapter board soldered. Press here. For Standard LCD 16x2 with White Background. Press here. For Standard LCD 16x2 with Blue Background. Press here.
BDT 240.00
BDT 240.00 tax incl.
BDT 240.00 tax excl.
BDT 240.00 tax excl.
BDT 240.00 tax incl.
BDT 240.00 tax incl.
BDT 0.00 Tax
BDT 240.00 tax excl.
BDT 240.00 tax excl.
BDT 0.00 Tax
BDT 240.00 tax incl.
More
In-Stock
In stock: 307

Reference: RBD-2053

Arduino Pro Micro 5V/16MHz Type-C

(0)
ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD
BDT 755.00
BDT 755.00 tax incl.
BDT 755.00 tax excl.
BDT 755.00 tax excl.
BDT 755.00 tax incl.
BDT 755.00 tax incl.
BDT 0.00 Tax
BDT 755.00 tax excl.
BDT 755.00 tax excl.
BDT 0.00 Tax
BDT 755.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-0699

1.8" inch TFT LCD Display module ST7735S 128x160

(0)
Display Size: 1.8″ Driver IC: ST7735 Input Voltage (V): 3.3 to 5 Pixel Resolution: 128 x 160 Interface Type: SPI
BDT 590.00
BDT 590.00 tax incl.
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 590.00 tax incl.
BDT 590.00 tax incl.
BDT 0.00 Tax
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 0.00 Tax
BDT 590.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-0924

TM1637 LED Display Module for Arduino

(0)
Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 30 mA Display Dimensions: 42x24x12 (LxWxH) mm
BDT 120.00
BDT 120.00 tax incl.
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 120.00 tax incl.
BDT 120.00 tax incl.
BDT 0.00 Tax
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 0.00 Tax
BDT 120.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0136

Arduino Due

(0)
Microcontroller: AT91SAM3X8E Operating Voltage: 3.3V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-16V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 (DAC) A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. CPU clock at 84Mhz 96KBytes of SRAM
BDT 3,990.00
BDT 3,990.00 tax incl.
BDT 3,990.00 tax excl.
BDT 3,990.00 tax excl.
BDT 3,990.00 tax incl.
BDT 3,990.00 tax incl.
BDT 0.00 Tax
BDT 3,990.00 tax excl.
BDT 3,990.00 tax excl.
BDT 0.00 Tax
BDT 3,990.00 tax incl.
More
In-Stock
In stock: 19

Reference: RBD-1809

Digispark Pro - ATtiny167 with Micro USB

(0)
Digispark Pro  ATtiny167  Micro USB 16MHz
BDT 539.00 BDT 549.00
BDT 549.00 BDT 539.00 tax incl.
BDT 549.00 BDT 539.00 tax excl.
BDT 549.00 BDT 539.00 tax excl.
BDT 549.00 BDT 539.00 tax incl.
BDT 549.00 BDT 539.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 549.00 BDT 539.00 tax excl.
BDT 549.00 BDT 539.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 549.00 BDT 539.00 tax incl.
More
In-Stock
In stock: 29

Reference: RBD-1064

1.3 Inch I2C OLED Display Module 4pin- Blue

(0)
Size: 1.3 inch Resolution: 128 x 64 Controlling Chip: SSH1106 Driving Voltage: 3.3-5V Operating Temperature: -40~70 celsius Interface Type: IIC Light Color: Blue If you want to purchase White color 1.3 inch OLED display module click here
BDT 630.00
BDT 630.00 tax incl.
BDT 630.00 tax excl.
BDT 630.00 tax excl.
BDT 630.00 tax incl.
BDT 630.00 tax incl.
BDT 0.00 Tax
BDT 630.00 tax excl.
BDT 630.00 tax excl.
BDT 0.00 Tax
BDT 630.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0939

Mini Wireless 2.4GHz Keyboard with Mouse Touchpad Remote Control, Backlight

(0)
RGB Backlight Keys Onboard trackpad with all mouse function Left+Right click Gaming keys Operate on inbuilt Rechargeable battery Navigation, Volume Rockers and Home key Portable Pocket Size Plug and Play operation, No drivers needed to install Compatible with all Devices and operating Systems
BDT 899.00
BDT 899.00 tax incl.
BDT 899.00 tax excl.
BDT 899.00 tax excl.
BDT 899.00 tax incl.
BDT 899.00 tax incl.
BDT 0.00 Tax
BDT 899.00 tax excl.
BDT 899.00 tax excl.
BDT 0.00 Tax
BDT 899.00 tax incl.
More
In-Stock
In stock: 10

Reference: RBD-1107

0.56 Inch 4 Digit 7 Segment Red Common Cathode Display

(0)
Bright Red LED chip, which is made from AlGaAs on GaAs substrate Blackface and RED LED segments Type: Common cathode No. of Pins: 12 Low Current Consumption High Brightness Easy to Use with PCB Mounting as well as on Breadboard
BDT 50.00
BDT 50.00 tax incl.
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 50.00 tax incl.
BDT 50.00 tax incl.
BDT 0.00 Tax
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 0.00 Tax
BDT 50.00 tax incl.
More
In-Stock
In stock: 77

Reference: RBD-0752

Mini Wireless Keyboard with Touchpad Mouse for Raspberry pi and windows

(0)
Onboard trackpad with all mouse function Left+Right click Gaming keys Operate on inbuilt Rechargeable battery Navigation, Volume Rockers and Home key Portable Pocket Size Plug and Play operation, No drivers needed to install Compatible with all Devices and operating Systems. RoboticsBD
BDT 900.00
BDT 900.00 tax incl.
BDT 900.00 tax excl.
BDT 900.00 tax excl.
BDT 900.00 tax incl.
BDT 900.00 tax incl.
BDT 0.00 Tax
BDT 900.00 tax excl.
BDT 900.00 tax excl.
BDT 0.00 Tax
BDT 900.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0154

Arduino Leonardo R3

(0)
Microcontroller: ATmega32u4 Operating Voltage: 5V Input Voltage (Recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 20 PWM Channels: 7 Analog Input Channels: 12
BDT 790.00
BDT 790.00 tax incl.
BDT 790.00 tax excl.
BDT 790.00 tax excl.
BDT 790.00 tax incl.
BDT 790.00 tax incl.
BDT 0.00 Tax
BDT 790.00 tax excl.
BDT 790.00 tax excl.
BDT 0.00 Tax
BDT 790.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-1109

10 Digit LED Bar Graph Display

(0)
Bright Red LED chip, which is made from AlGaAs on GaAs substrate Blackface and RED LED segments Type: Common cathode No. of Pins: 20 Low Current Consumption High Brightness
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 98

Reference: RBD-0682

Arduino LilyPad 328 ATmega328P

(0)
Microcontroller: ATmega168 or ATmega328V Operating Voltage: 2.7-5.5 V Digital I/O Pins: 14 PWM Channels: 6 Analog Input Channels: 6 DC Current per I/O Pin: 40 mA Board will run from 2V to 5V. The latest version of the LilyPad supports automatic reset for even easier programming. The back side of the LilyPad is now completely flat! RoboticsBD
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 55

Reference: RBD-0663

TTP223B Digital Touch Sensor Capacitive Touch

(0)
Power supply voltage(VCC): 2.0, 3, 5.5 V. Output high VOH: 0.8VCC V Output low VOL: 0.3VCC V Response time (touch mode) : 60 mS Response time (low power mode) : 220 mS Can replace the traditional touch of a button Four M2 screws positioning holes for easy installation RoboticsBD
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 471

Reference: RBD-1541

37 In 1 Sensor Module Board Set Kit For Arduino with Box

(0)
For beginners who are interested in Arduino A complete set of Arduino’s most common and useful electronic components Infrared sensor receiving module Laser sensor module Temperature and humidity sensor module Infrared sensor module 5v relay module Obstacle avoidance sensor module.
BDT 1,990.00
BDT 1,990.00 tax incl.
BDT 1,990.00 tax excl.
BDT 1,990.00 tax excl.
BDT 1,990.00 tax incl.
BDT 1,990.00 tax incl.
BDT 0.00 Tax
BDT 1,990.00 tax excl.
BDT 1,990.00 tax excl.
BDT 0.00 Tax
BDT 1,990.00 tax incl.
More
In-Stock
In stock: 24

Reference: RBD-1164

LCD Display 16X2 with Header

(0)
For Standard LCD 16x2 with Male Header. Press here For Standard LCD 16x2 with Female Header. Press here For Standard LCD 16x2 with I2C adapter board soldered. Press here. For Standard LCD 16x2 with White Background. Press here. For Standard LCD 16x2 with Blue Background. Press here.
BDT 255.00
BDT 255.00 tax incl.
BDT 255.00 tax excl.
BDT 255.00 tax excl.
BDT 255.00 tax incl.
BDT 255.00 tax incl.
BDT 0.00 Tax
BDT 255.00 tax excl.
BDT 255.00 tax excl.
BDT 0.00 Tax
BDT 255.00 tax incl.
More
In-Stock
In stock: 6

Reference: RBD-0416

TTP229 8 Channel Digital Capacitive Switch Touch Sensor Module for Arduino

(0)
Onboard 8 key TTP226 capacitive touch induction IC. RoboticsBD Onboard 8-way level indicator. Working voltage: 2.4 to 5.5 V. Modules, you can set the output mode, key output mode, the longest time and fast/low power output
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 20

Follow us on Facebook