Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 12.00 - BDT 204,035.00

Categories

Categories

Brand

Brand

Weight

Weight

  • 0 kg - 28,800 kg

  • Banner

Active filters
  • Categories: 3D Printed
  • Categories: 3D Printer
  • Categories: Arduino Boards
  • Categories: Display
  • Categories: Learning Kit
  • Categories: Motor
  • Categories: Raspberry Pi

Reference: RBD-0353

0.96" Inch I2C OLED Display Yellow

(0)
Driver IC: SSD1306 Support wide voltage: 3.3V-5V DC Communication: IIC Working temperature: -30-80 degrees. RoboticsBD
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 22

Reference: RBD-0262

Jumper Wire housing 6 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 6 jumper wires (6-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-2126

Arduino Micro R3

(0)
Manufacturer: China Support TWI and SPI communication Input voltage (recommended) range from 7V to 12V Input Voltage (limit) range from 6V to 20V 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs) Onboard ATmega32u4 microcontroller with 32KB flash memory, 2.5KB SRAM and 1KB EEPROM
BDT 1,380.00
BDT 1,380.00 tax incl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 1,380.00 tax incl.
BDT 1,380.00 tax incl.
BDT 0.00 Tax
BDT 1,380.00 tax excl.
BDT 1,380.00 tax excl.
BDT 0.00 Tax
BDT 1,380.00 tax incl.
More
In-Stock
In stock: 24

Reference: RBD-1666

Brand: RoboticsBD

Advanced Kit with Arduino Uno R3

(0)
All-in-one kit, a great starter kit for learning to code. Model Type: UNO Rev R3 Microcontroller Chip: ATmega328 Input Voltage(Recommended): 7-12V Operating Voltage: 5 Analog I/O Pins: 6 Digital I/O Pins: 14 (of which 6 provide PWM output)
BDT 4,999.00
BDT 4,999.00 tax incl.
BDT 4,999.00 tax excl.
BDT 4,999.00 tax excl.
BDT 4,999.00 tax incl.
BDT 4,999.00 tax incl.
BDT 0.00 Tax
BDT 4,999.00 tax excl.
BDT 4,999.00 tax excl.
BDT 0.00 Tax
BDT 4,999.00 tax incl.
More
Last items in stock
In stock: 2

Reference: 1317

TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 2,300.00
BDT 2,300.00 tax incl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax incl.
BDT 2,300.00 tax incl.
BDT 0.00 Tax
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 0.00 Tax
BDT 2,300.00 tax incl.
More
Out-of-Stock
In stock: -9

Reference: RBD-0740

Brand: Raspberry Pi Official

Raspberry Pi Zero W

(0)
Fully HAT compatible 40pin GPIO (Unpopulated) Stream and watch Hi-definition video output at 1080P 512MB RAM and Micro SD Slot for OS Tiny Current Draw ~ 140mA at 5V! Mini-HDMI for Video Micro-USB OTG Host for Data and Power Micro-CSI Camera Port On-Board Bluetooth and WiFi. RoboticsBD
BDT 4,175.00
BDT 4,175.00 tax incl.
BDT 4,175.00 tax excl.
BDT 4,175.00 tax excl.
BDT 4,175.00 tax incl.
BDT 4,175.00 tax incl.
BDT 0.00 Tax
BDT 4,175.00 tax excl.
BDT 4,175.00 tax excl.
BDT 0.00 Tax
BDT 4,175.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0727

12V Mini Cooling Fan 40x40x10mm

(0)
Operating Voltage: 12VDC Power Consumption: 1.42 W Body and Blade Constructed from Thermoplastic PBT of UL 94V-0 Single Phase 4 Pole Brushless DC Motor Precise Vapo Bearing Counterclockwise Rotation Direction if Viewed from front of Fan Blade
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In-Stock
In stock: 95

Reference: RBD-0384

MAX7219 Red Dot Matrix Module MCU Control Display Module DIY Kit For Arduino

(0)
Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 320 mA Display Dimensions: 32x32x6 (LxWxH) mm PCD Dimensions: 50×32 (LxW) mm Soldering is required
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 10

Reference: RBD-0263

Jumper Wire housing 7 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 7 jumper wires (7-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-2393

Brand: Raspberry Pi Official

Raspberry Pi Pico W with Soldered Headers

(0)
The Raspberry Pi Pico W builds upon the great cost-for-performance metrics of the Pico and add WiFi to the board. The Pico W features the same attributes as the Raspberry Pi Pico and also incorporates an Infineon CYW43439 wireless chip. CYW43439 supports IEEE 802.11 b/g/n wireless LAN, and Bluetooth® 5.2. (6/30/2022: Only Wireless LAN is supported on the...
BDT 1,549.00
BDT 1,549.00 tax incl.
BDT 1,549.00 tax excl.
BDT 1,549.00 tax excl.
BDT 1,549.00 tax incl.
BDT 1,549.00 tax incl.
BDT 0.00 Tax
BDT 1,549.00 tax excl.
BDT 1,549.00 tax excl.
BDT 0.00 Tax
BDT 1,549.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-1662

Brand: RoboticsBD

Learning kit for Arduino Uno SMD

(0)
All-in-one kit, a great starter kit for learning coding. Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 5-20V Digital I / O Pins 14 (of which 6 provide PWM output) Analog Input Pins: 6
BDT 1,300.00
BDT 1,300.00 tax incl.
BDT 1,300.00 tax excl.
BDT 1,300.00 tax excl.
BDT 1,300.00 tax incl.
BDT 1,300.00 tax incl.
BDT 0.00 Tax
BDT 1,300.00 tax excl.
BDT 1,300.00 tax excl.
BDT 0.00 Tax
BDT 1,300.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-1386

Brand: Anycubic

Colored UV Resin 500mL Black

(0)
Wavelength(nm): 395-405 Color: Black Density(g/m^3): 1.08-1.13 Hardness(Shore D):79.0 Tensile Strength(MPa): 46-67 Elongation at Break(%):28-35
BDT 2,990.00
BDT 2,990.00 tax incl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax incl.
BDT 2,990.00 tax incl.
BDT 0.00 Tax
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 0.00 Tax
BDT 2,990.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0736

7x20mm Coreless Motor with 55mm Propeller Pair

(0)
Model: 720 Shaft Size: 1.0 mm Rated Voltage: 3.7 V. Current: 0.1 A. Rated RPM: 48000. Max Speed: 50000 RPM. Wire Length: 5cm Prop. Length: 55mm
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 97

Reference: RBD-0399

Graphic LCD 84x48 (Nokia 5110) Black on White for Arduino

(0)
Power supply voltage: 2.7 V-3.3 V/5 V Data interface level: 2.7-5V. Resolution: 84 x 48 pixel Backlight power supply voltage: highest 3.3 V. Backlight: Blue. RoboticsBD Note: Current stock is tested by us. 
BDT 260.00
BDT 260.00 tax incl.
BDT 260.00 tax excl.
BDT 260.00 tax excl.
BDT 260.00 tax incl.
BDT 260.00 tax incl.
BDT 0.00 Tax
BDT 260.00 tax excl.
BDT 260.00 tax excl.
BDT 0.00 Tax
BDT 260.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0269

Jumper Wire housing 8 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 8 jumper wires (8-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-0155

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328 Circuit Operating Voltage: 5V Clock frequency: 16MHz. Digital I/O Pins: 14 8 analog input port: A0 ~ A7. A pair of TTL level serial port transceiver : RX / TX. 6 PWM port: D3, D5, D6, D9, D10, D11. Support serial download.
BDT 680.00
BDT 680.00 tax incl.
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 680.00 tax incl.
BDT 680.00 tax incl.
BDT 0.00 Tax
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 0.00 Tax
BDT 680.00 tax incl.
More
In-Stock
In stock: 88

Reference: RBD-2386

Brand: Raspberry Pi Official

Raspberry Pi Pico W

(0)
The Raspberry Pi Pico W builds upon the great cost-for-performance metrics of the Pico and add WiFi to the board. The Pico W features the same attributes as the Raspberry Pi Pico and also incorporates an Infineon CYW43439 wireless chip. CYW43439 supports IEEE 802.11 b/g/n wireless LAN, and Bluetooth® 5.2. (6/30/2022: Only Wireless LAN is supported on the...
BDT 1,449.00
BDT 1,449.00 tax incl.
BDT 1,449.00 tax excl.
BDT 1,449.00 tax excl.
BDT 1,449.00 tax incl.
BDT 1,449.00 tax incl.
BDT 0.00 Tax
BDT 1,449.00 tax excl.
BDT 1,449.00 tax excl.
BDT 0.00 Tax
BDT 1,449.00 tax incl.
More
In stock
In stock: 117

Reference: RBD-1523

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328P Circuit Operating Voltage: 5V Clock frequency: 16MHz. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. A pair of TTL level serial port transceiver : RX / TX.
BDT 430.00
BDT 430.00 tax incl.
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 430.00 tax incl.
BDT 430.00 tax incl.
BDT 0.00 Tax
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 0.00 Tax
BDT 430.00 tax incl.
More
In-Stock
In stock: 25

Reference: RBD-1227

3D Scanner Laser Desktop- DIY Red

(0)
Object Scanning Device with USB 2.0 Interface / CMOS Sensor
BDT 18,999.00
BDT 18,999.00 tax incl.
BDT 18,999.00 tax excl.
BDT 18,999.00 tax excl.
BDT 18,999.00 tax incl.
BDT 18,999.00 tax incl.
BDT 0.00 Tax
BDT 18,999.00 tax excl.
BDT 18,999.00 tax excl.
BDT 0.00 Tax
BDT 18,999.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-0750

85mm Antiskid Shockproof Wheels, Smart Car Robot Tires with 37GB Motor

(0)
Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor Diameter: 85 mm Width : 38 mm The material of Wheel: High-strength plastic The material of Tyre: Rubber Color: Black Tyre + Blue Rim
BDT 2,350.00
BDT 2,350.00 tax incl.
BDT 2,350.00 tax excl.
BDT 2,350.00 tax excl.
BDT 2,350.00 tax incl.
BDT 2,350.00 tax incl.
BDT 0.00 Tax
BDT 2,350.00 tax excl.
BDT 2,350.00 tax excl.
BDT 0.00 Tax
BDT 2,350.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0401

LCD Module 8x2 Characters Display

(0)
Display: 8×2 character Outline: 58.0x32.0x10.0 VA: 37.8x16.0 Controller: SPLC780D Character: 2.96x5.56 Driver: 1/16
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 46

Reference: RBD-0127

Obstacle Avoiding Robot Kit

(0)
Obstacle Avoiding Robot Kit
BDT 2,500.00
BDT 2,500.00 tax incl.
BDT 2,500.00 tax excl.
BDT 2,500.00 tax excl.
BDT 2,500.00 tax incl.
BDT 2,500.00 tax incl.
BDT 0.00 Tax
BDT 2,500.00 tax excl.
BDT 2,500.00 tax excl.
BDT 0.00 Tax
BDT 2,500.00 tax incl.
More
Out-of-Stock
In stock: -1

Reference: RBD-1681

Jumper Wire housing 4Pin

(0)
3D printed Dupont connector for Jumper cable 4pin
BDT 60.00
BDT 60.00 tax incl.
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 60.00 tax incl.
BDT 60.00 tax incl.
BDT 0.00 Tax
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 0.00 Tax
BDT 60.00 tax incl.
More
In-Stock
In stock: 17

Reference: RBD-1664

Brand: RoboticsBD

OTTO Programmable Robot Kit DIY

(0)
Open Source Design Compatible With Arduino IDE DIY Kit Easy to Assemble This is the DIY Kit, It comes with no coding, if you want Complete OTTO bot click here.
BDT 6,999.00
BDT 6,999.00 tax incl.
BDT 6,999.00 tax excl.
BDT 6,999.00 tax excl.
BDT 6,999.00 tax incl.
BDT 6,999.00 tax incl.
BDT 0.00 Tax
BDT 6,999.00 tax excl.
BDT 6,999.00 tax excl.
BDT 0.00 Tax
BDT 6,999.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-1599

Brand: Raspberry Pi Official

Raspberry Pi Pico

(0)
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Temperature sensor
BDT 870.00 BDT 930.00
BDT 930.00 BDT 870.00 tax incl.
BDT 930.00 BDT 870.00 tax excl.
BDT 930.00 BDT 870.00 tax excl.
BDT 930.00 BDT 870.00 tax incl.
BDT 930.00 BDT 870.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 930.00 BDT 870.00 tax excl.
BDT 930.00 BDT 870.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 930.00 BDT 870.00 tax incl.
More
In-Stock
In stock: 116

Reference: RBD-0838

Arduino Pro Micro 5V/16MHz

(0)
ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD
BDT 870.00
BDT 870.00 tax incl.
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 870.00 tax incl.
BDT 870.00 tax incl.
BDT 0.00 Tax
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 0.00 Tax
BDT 870.00 tax incl.
More
In-Stock
In stock: 41

Reference: RBD-0817

Nema 23 23HS5628 Stepper Motor

(0)
Step Angle Step Angle: 1.8 ° Current: 2.8 A/Phase Holding Torque: 10.1 N-cm Detent torque: 3.6 N.cm (Maximum) Lead Wires: 4 Shaft diameter: 8.00 mm
BDT 2,990.00
BDT 2,990.00 tax incl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax incl.
BDT 2,990.00 tax incl.
BDT 0.00 Tax
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 0.00 Tax
BDT 2,990.00 tax incl.
More
In-Stock
In stock: 20

Reference: RBD-0661

Standard LCD 16x2 Display Yellow Backlight

(0)
For Standard LCD 16x2 with Male Header. Press here For Standard LCD 16x2 with Female Header. Press here For Standard LCD 16x2 with I2C adapter board soldered. Press here. For Standard LCD 16x2 with White Background. Press here. For Standard LCD 16x2 with Blue Background. Press here.
BDT 240.00
BDT 240.00 tax incl.
BDT 240.00 tax excl.
BDT 240.00 tax excl.
BDT 240.00 tax incl.
BDT 240.00 tax incl.
BDT 0.00 Tax
BDT 240.00 tax excl.
BDT 240.00 tax excl.
BDT 0.00 Tax
BDT 240.00 tax incl.
More
In-Stock
In stock: 307

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-2053

Arduino Pro Micro 5V/16MHz Type-C

(0)
ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD
BDT 755.00
BDT 755.00 tax incl.
BDT 755.00 tax excl.
BDT 755.00 tax excl.
BDT 755.00 tax incl.
BDT 755.00 tax incl.
BDT 0.00 Tax
BDT 755.00 tax excl.
BDT 755.00 tax excl.
BDT 0.00 Tax
BDT 755.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-2012

Brand: Raspberry Pi Official

Raspberry Pi Pico With Soldered Headers

(0)
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Onboard temperature sensor
BDT 970.00 BDT 1,070.00
BDT 1,070.00 BDT 970.00 tax incl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax incl.
BDT 1,070.00 BDT 970.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 1,070.00 BDT 970.00 tax incl.
More
In-Stock
In stock: 6

Reference: RBD-1111

Geiger Counter Kit Nuclear Radiation Detector Gamma Ray Build Radiation Monitoring Station

(0)
This is one open-source Geiger Counter project which could be used to detect nuclear radiation. The schematic and code and other helpful files are listed in this package. All the codes are designed and tested on this kit, these materials are useful for DIY Geiger Counter Kit Nuclear Radiation Detectors or Radiation Monitoring Stations. Note: The kit comes...
BDT 5,890.00
BDT 5,890.00 tax incl.
BDT 5,890.00 tax excl.
BDT 5,890.00 tax excl.
BDT 5,890.00 tax incl.
BDT 5,890.00 tax incl.
BDT 0.00 Tax
BDT 5,890.00 tax excl.
BDT 5,890.00 tax excl.
BDT 0.00 Tax
BDT 5,890.00 tax incl.
More
In-Stock
In stock: 8

Follow us on Facebook