Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 0.00 - BDT 204,035.00

Categories

Categories

Jumper Wire Type

Jumper Wire Type

Brand

Brand

Weight

Weight

  • 0 kg - 28,800 kg

  • Banner

Active filters
  • Categories: 3D Printer
  • Categories: Connector
  • Categories: Power Module & Adapter
  • Categories: Programmer
  • Categories: Robotics Parts

Reference: RBD-0988

18650 Battery Holder 3S with wire

(0)
Hold 3 standard 18650 batteries. Wire Length: 15 cm. Output: 11.1 V. Dimension (Appro.) : 76 x 60 x 18 mm. Weight: 18 gm. High-quality plastic material
BDT 75.00 BDT 90.00
BDT 90.00 BDT 75.00 tax incl.
BDT 90.00 BDT 75.00 tax excl.
BDT 90.00 BDT 75.00 tax excl.
BDT 90.00 BDT 75.00 tax incl.
BDT 90.00 BDT 75.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 90.00 BDT 75.00 tax excl.
BDT 90.00 BDT 75.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 90.00 BDT 75.00 tax incl.
More
In-Stock
In stock: 350

Reference: RBD-0659

Digital Line Following Sensor - 8 Array

(0)
Operating voltage: 4.5V to 5.0 V Supply current: 150 mA Output format: 8 Digital voltages. Optimal sensing distance: 3 mm. Maximum recommended sensing distance: 6 mm Uses 8 sensors for best resolution Comes with easy to use digital outputs that can be connected directly to microcontrollers Sample Programming Code is available. RoboticsBD
BDT 450.00
BDT 450.00 tax incl.
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 450.00 tax incl.
BDT 450.00 tax incl.
BDT 0.00 Tax
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 0.00 Tax
BDT 450.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2195

50 cm Micro USB Cable for Arduino Leonardo and Node MCU

(0)
Fully compatible with the PC. Moulded strain relief and PVC over moulding to ensure a lifetime of error-free data transmissions. Aluminium under mould shield helps meet FCC requirements on KMI/RFI interference. Foil and braid shield complies with fully rated cable specifications reducing EMI/FRI interference.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 185

Reference: RBD-0989

18650 Battery Holder – 1 Cell

(0)
Hold A standard 18650 batteries Wire : 15cm Output: 3.7v Dimension (Appro.): 76x20x20xmm Weight: 8gm High-quality plastic material
BDT 40.00
BDT 40.00 tax incl.
BDT 40.00 tax excl.
BDT 40.00 tax excl.
BDT 40.00 tax incl.
BDT 40.00 tax incl.
BDT 0.00 Tax
BDT 40.00 tax excl.
BDT 40.00 tax excl.
BDT 0.00 Tax
BDT 40.00 tax incl.
More
In-Stock
In stock: 135

Reference: RBD-0925

18650 Battery Holder 4S with wire

(0)
Hold 4 standard 18650 batteries. Wire Length: 15 cm. Output: 14.8 V. Dimension (Appro.) : 80 x 76 x 18 mm. Weight: 28 gm. High-quality plastic material
BDT 100.00
BDT 100.00 tax incl.
BDT 100.00 tax excl.
BDT 100.00 tax excl.
BDT 100.00 tax incl.
BDT 100.00 tax incl.
BDT 0.00 Tax
BDT 100.00 tax excl.
BDT 100.00 tax excl.
BDT 0.00 Tax
BDT 100.00 tax incl.
More
In-Stock
In stock: 73

Reference: RBD-0727

12V Mini Cooling Fan 40x40x10mm

(0)
Operating Voltage: 12VDC Power Consumption: 1.42 W Body and Blade Constructed from Thermoplastic PBT of UL 94V-0 Single Phase 4 Pole Brushless DC Motor Precise Vapo Bearing Counterclockwise Rotation Direction if Viewed from front of Fan Blade
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In-Stock
In stock: 95

Reference: RBD-0326

4WD Smart Robot Chassis Kit

(0)
Very handy and simple in assembling/disassembling. RoboticsBD Strong components so as to withstand extreme terrain conditions. Transparent Car Chassis. Attractive design. RoboticsBD
BDT 1,090.00
BDT 1,090.00 tax incl.
BDT 1,090.00 tax excl.
BDT 1,090.00 tax excl.
BDT 1,090.00 tax incl.
BDT 1,090.00 tax incl.
BDT 0.00 Tax
BDT 1,090.00 tax excl.
BDT 1,090.00 tax excl.
BDT 0.00 Tax
BDT 1,090.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2196

50 cm Cable For Arduino UNO/MEGA (USB A to B)

(0)
USB Type: Type-A to Type-B Weight: 26 gm. Length: 50 cm Long cable for easy work Fully compatible with the PC. Molded strain relief and PVC over-molding to ensure a lifetime of error-free data transmissions.
BDT 130.00
BDT 130.00 tax incl.
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 130.00 tax incl.
BDT 130.00 tax incl.
BDT 0.00 Tax
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 0.00 Tax
BDT 130.00 tax incl.
More
In-Stock
In stock: 135

Reference: RBD-1309

Raspberry Pi Power Adapter with Switch Micro USB

(0)
Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz. Input current (mA): 100. Output Power: 5V 3A. Load regulation (%): ±5. Input Plug: 2-Pin EU type. Output Plug: Micro USB Plug. Compatible with: Raspberry Pi B+, 2, 2B, 2B+,3 ,3B+, Zero, Zero W. It has a switch so you can easily power off the device without having to unplug it right from the socket.
BDT 525.00
BDT 525.00 tax incl.
BDT 525.00 tax excl.
BDT 525.00 tax excl.
BDT 525.00 tax incl.
BDT 525.00 tax incl.
BDT 0.00 Tax
BDT 525.00 tax excl.
BDT 525.00 tax excl.
BDT 0.00 Tax
BDT 525.00 tax incl.
More
In-Stock
In stock: 27

Reference: RBD-0940

JST connectors (male+female) Pair 95mm

(0)
Good Quality Type: Male-Female Plated Connectors Length: 10 cm Color: Red and Black
BDT 50.00
BDT 50.00 tax incl.
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 50.00 tax incl.
BDT 50.00 tax incl.
BDT 0.00 Tax
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 0.00 Tax
BDT 50.00 tax incl.
More
In-Stock
In stock: 34

Reference: RBD-0684

Motor Driver - Dual TB6612FNG (1A)

(0)
CW/CCW/short break/stop motor control modes Built-in thermal shutdown circuit and a low voltage detecting circuit Standby control to save power CW/CCW/short brake/stop motor control modes Operating Voltage(VDC): 15 Peak Current (A): 3.2 Continuous Current (A): 1.2 No. of Channels: 1
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-2198

CH341 USB Programmer

(0)
Model: CH341 Series Main Chip: CH341B Dimensions in mm (LxWxH): 85 x 28 x 12 Weight (gm): 20 8-bit parallel in EPP or MEM mode
BDT 445.00
BDT 445.00 tax incl.
BDT 445.00 tax excl.
BDT 445.00 tax excl.
BDT 445.00 tax incl.
BDT 445.00 tax incl.
BDT 0.00 Tax
BDT 445.00 tax excl.
BDT 445.00 tax excl.
BDT 0.00 Tax
BDT 445.00 tax incl.
More
In-Stock
In stock: 26

Reference: RBD-1414

NVIDIA Jetson Nano 5V 4A DC Power Adapter

(0)
Input Voltage (V): 100 ~ 270 VAC @50 ~ 60Hz. Input current (mA): 100. Output Power: 5V 4A. Load regulation (%): ±5. Input Plug: 2-Pin US type. Output Plug: DC Jack 5.5mm.
BDT 1,150.00
BDT 1,150.00 tax incl.
BDT 1,150.00 tax excl.
BDT 1,150.00 tax excl.
BDT 1,150.00 tax incl.
BDT 1,150.00 tax incl.
BDT 0.00 Tax
BDT 1,150.00 tax excl.
BDT 1,150.00 tax excl.
BDT 0.00 Tax
BDT 1,150.00 tax incl.
More
In-Stock
In stock: 35

Reference: RBD-0941

Servo Extension Cable Male to Female 300mm

(0)
High-Quality cable One male and one female connector. Flat 25 cm Servo Lead Extension (Futaba) Quality wire and connectors used. Great for larger planes with servos that experience high loads.
BDT 95.00
BDT 95.00 tax incl.
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 95.00 tax incl.
BDT 95.00 tax incl.
BDT 0.00 Tax
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 0.00 Tax
BDT 95.00 tax incl.
More
In-Stock
In stock: 66

Reference: RBD-0434

DRV8825 Stepper Motor Driver Module

(0)
Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm. RoboticsBD
BDT 230.00
BDT 230.00 tax incl.
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 230.00 tax incl.
BDT 230.00 tax incl.
BDT 0.00 Tax
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 0.00 Tax
BDT 230.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-0034

Servo Motor MG996R 180 Degree Rotation

(0)
Weight: 55g Dimension: 40.7×19.7×42.9mm Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v) Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v) Operating voltage: 4.8 ~ 6.6V Gear Type: Metal gear Dead band width: 1us Wire length: 32cm
BDT 445.00
BDT 445.00 tax incl.
BDT 445.00 tax excl.
BDT 445.00 tax excl.
BDT 445.00 tax incl.
BDT 445.00 tax incl.
BDT 0.00 Tax
BDT 445.00 tax excl.
BDT 445.00 tax excl.
BDT 0.00 Tax
BDT 445.00 tax incl.
More
In-Stock
In stock: 165

Reference: RBD-2311

USB To Serial Cable TTL 4 Pin Rs 232 UART Converter Adapter Programming Module

(0)
USB 4 Pin TTL RS 232 UART Serial Converter Adapter Programming Module Cable. The PL-2303HX USB to TTL RS232 Serial converter is a low-cost USB to Serial Adapter.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In stock
In stock: 51

Reference: RBD-1524

LM2596 DC DC Step Down Buck Converter with Digital Tube Display

(0)
Input Voltage(VDC): 4 ~ 40. Output Voltage(VDC): 1.3 ~ 37. Output Current: 2A Rated, ( 3A maximum with heat sink). Switching Frequency: 150 kHz. Input reverse polarity protection. Built-in output short protection function.
BDT 259.00
BDT 259.00 tax incl.
BDT 259.00 tax excl.
BDT 259.00 tax excl.
BDT 259.00 tax incl.
BDT 259.00 tax incl.
BDT 0.00 Tax
BDT 259.00 tax excl.
BDT 259.00 tax excl.
BDT 0.00 Tax
BDT 259.00 tax incl.
More
In stock
In stock: 175

Reference: RBD-0796

18 DOF Aluminium Metal Hexapod Robot Spider Six Foot/Feet Robotic Frame/Chassis Kit

(0)
Three DOF (degree of freedom) leg  Can walk in any direction.  Maximum torque of 13kg for the legs.
BDT 7,500.00
BDT 7,500.00 tax incl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax incl.
BDT 7,500.00 tax incl.
BDT 0.00 Tax
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 0.00 Tax
BDT 7,500.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

(0)
Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 65

Reference: RBD-2315

Pogo Pin Probe Clip - 6 Pins with 2.54mm

(0)
Pin Pitch: 2.54mm Probe model: P75-E2 (pointed tip) Needle diameter: 1.3mm Needle sleeve model R75-3W Row pin number: 6Pin Row Number: Single row space between: 2.54mm
BDT 990.00
BDT 990.00 tax incl.
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 990.00 tax incl.
BDT 990.00 tax incl.
BDT 0.00 Tax
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 0.00 Tax
BDT 990.00 tax incl.
More
In stock
In stock: 19

Reference: RBD-1535

WGP Mini UPS - Router + ONU Backup Output 5V, 12V, 12V

(0)
Multiple Outputs: 5V+12V+12V Constant DC output, long backup time up to 6 hours Intelligent circuit design with over-charging, over-discharging and short circuit protections Suitable for 95% DC/USB digital products, such as: modem, router, CCTV camera, mobile phone etc.
BDT 2,499.00
BDT 2,499.00 tax incl.
BDT 2,499.00 tax excl.
BDT 2,499.00 tax excl.
BDT 2,499.00 tax incl.
BDT 2,499.00 tax incl.
BDT 0.00 Tax
BDT 2,499.00 tax excl.
BDT 2,499.00 tax excl.
BDT 0.00 Tax
BDT 2,499.00 tax incl.
More
In-Stock
In stock: 10

Reference: RBD-0942

XT60 Connector 3.5mm Male and Female pair

(0)
Manufacturer: AMASS Type of connector:  DC supply Connector series:  XT60H Kind of connector:  Female Number of pins:  2
BDT 60.00
BDT 60.00 tax incl.
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 60.00 tax incl.
BDT 60.00 tax incl.
BDT 0.00 Tax
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 0.00 Tax
BDT 60.00 tax incl.
More
In-Stock
In stock: 151

Reference: RBD-0020

Servo Motor Micro SG90 180 Degree Rotation

(0)
Model: SG90 Weight: 9 gm Operating voltage: 3.0V~ 7.2V Servo Plug: JR Stall torque @4.8V : 1.2kg-cm Stall torque @6.6V : 1.6kg-cm Note: Product images/ Components brand may vary from actual product as our stock rotates.
BDT 149.00
BDT 149.00 tax incl.
BDT 149.00 tax excl.
BDT 149.00 tax excl.
BDT 149.00 tax incl.
BDT 149.00 tax incl.
BDT 0.00 Tax
BDT 149.00 tax excl.
BDT 149.00 tax excl.
BDT 0.00 Tax
BDT 149.00 tax incl.
More
In-Stock
In stock: 417

Reference: RBD-2362

CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi

(0)
Built-in USB to TTL Transfer chip. Designed to be used for USB to TTL electronic projects. TTL interface output, easy to connect to your MCU. Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device. The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit...
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In stock
In stock: 18

Reference: RBD-1545

9-40V to 5V 3A Step Down Power Supply Buck Converter

(0)
Input voltage 9~40V Output: 5V Maximum output current 2A Efficiency: 76-90% Material: electronic component
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 6

Reference: RBD-1379

Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor With TB6600 Stepper Motor Driver

(0)
Nema 23 23HS5628 2.8A Two Phase 6.35mm Shaft Stepper Motor  TB6600 Stepper Motor Driver CNC and 3D Printer
BDT 7,420.00
BDT 7,420.00 tax incl.
BDT 7,420.00 tax excl.
BDT 7,420.00 tax excl.
BDT 7,420.00 tax incl.
BDT 7,420.00 tax incl.
BDT 0.00 Tax
BDT 7,420.00 tax excl.
BDT 7,420.00 tax excl.
BDT 0.00 Tax
BDT 7,420.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-0999

AA Battery Holder 4S with Barrel Jack Connector

(0)
Holds 4 AA batteries The standard 5.5×2.1mm barrel jack at the output. Easy install, convenient to use. Dimensions mm (LxWxH): 62 x 58 x 15 Weight: 15 gm Material: Plastic Internal Connection: Series
BDT 95.00
BDT 95.00 tax incl.
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 95.00 tax incl.
BDT 95.00 tax incl.
BDT 0.00 Tax
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 0.00 Tax
BDT 95.00 tax incl.
More
In-Stock
In stock: 8

Reference: 0031

Jumper Wire 40 Pcs Set 20cm

(0)
3 Types Available (Please select from option) 1. Male to Male  2. Male to Female 3. Female-Female
BDT 100.00
BDT 100.00 tax incl.
BDT 100.00 tax excl.
BDT 100.00 tax excl.
BDT 100.00 tax incl.
BDT 100.00 tax incl.
BDT 0.00 Tax
BDT 100.00 tax excl.
BDT 100.00 tax excl.
BDT 0.00 Tax
BDT 100.00 tax incl.
More
In-Stock
In stock: 215

Reference: RBD-2412

USB ASP AVR Programming Device for ATMEL Processors Arduino

(0)
Compatible Chips:ATMega Series Tiny Series Classic Series CAN Series PWM Series You can also use this to recover your Arduino Bootloader
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In stock
In stock: 9

Reference: RBD-1390

Nema 17 Stepper Motor 17HS4401S

(0)
Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.
BDT 1,350.00
BDT 1,350.00 tax incl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax incl.
BDT 1,350.00 tax incl.
BDT 0.00 Tax
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 0.00 Tax
BDT 1,350.00 tax incl.
More
In-Stock
In stock: 43

Follow us on Facebook