Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 3.00 - BDT 70,000.00

Categories

Categories

Jumper Wire Type

Jumper Wire Type

Brand

Brand

Condition

Condition

Weight

Weight

  • 0 kg - 13,200 kg

  • Banner

Active filters
  • Categories: Cables - Wire
  • Categories: HMI
  • Categories: Mini Computer/ PC
  • Categories: Robotics Parts
  • Categories: Sensors
  • Condition: New

Reference: RBD-0150

5mW Adjustable Laser Dot Diode Module

(0)
Output Power: 5mW Working Voltage: 3-3.3V DC Working temperature: -10 ℃~+40 ℃ Housing material: Copper Working life: more than 2000 hours Spot mode: Dot Facula (continuous output) Laser wavelength: 650nm red-colored. Operating current: <40mA Power lead length: 120mm. 5V could damage the laser
BDT 26.00
BDT 26.00 tax incl.
BDT 26.00 tax excl.
BDT 26.00 tax excl.
BDT 26.00 tax incl.
BDT 26.00 tax incl.
BDT 0.00 Tax
BDT 26.00 tax excl.
BDT 26.00 tax excl.
BDT 0.00 Tax
BDT 26.00 tax incl.
More
In-Stock
In stock: 164

Reference: RBD-2399

4 Pin JST-XH 2.54mm Cable–Female/Female - 150mm/6" Long

(0)
This 4-wire cable is a little over 150mm / 6" long and fitted with JST-XH female 4-pin connectors on each end. These types of JST cables are commonly found on small rechargeable battery packs, RC receivers and transmitters, tiny cameras, and other small electronic devices
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In stock
In stock: 148

Reference: RBD-0159

LCD Keypad Shield for Arduino

(0)
Provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 6 keys select, up, right, down, left and reset. To save the digital IO pins, the keypad interface only uses one ADC channel. The key value is read out through a 5 stage voltage...
BDT 550.00
BDT 550.00 tax incl.
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 550.00 tax incl.
BDT 550.00 tax incl.
BDT 0.00 Tax
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 0.00 Tax
BDT 550.00 tax incl.
More
In-Stock
In stock: 33

Reference: RBD-2425

Shielded Blue USB Type-C Cable 30cm for Arduino

(0)
Now you can connect your Arduino boards, ESP or any other development platform with the Type-C USB Cable. Through a USB-C to USB-A connection, this data USB cable can easily connect your Arduino boards with your chosen programming device.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In stock
In stock: 87

Reference: RBD-0161

20x4 Character LCD

(0)
Model: LCD2004 Character Color: White Backlight: Blue Supply voltage: 5V Dimensions(L x W x H) mm: 98 x 60 x 12
BDT 343.00
BDT 343.00 tax incl.
BDT 343.00 tax excl.
BDT 343.00 tax excl.
BDT 343.00 tax incl.
BDT 343.00 tax incl.
BDT 0.00 Tax
BDT 343.00 tax excl.
BDT 343.00 tax excl.
BDT 0.00 Tax
BDT 343.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-2427

USB Type-C Cable 1meter for Arduino

(0)
Now you can connect your Arduino boards, ESP or any other development platform with the Type-C USB Cable. Through a USB-C to USB-A connection, this data USB cable can easily connect your Arduino boards with your chosen programming device.
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In stock
In stock: 89

Reference: RBD-0166

XBee 1mW Trace Antenna - Series 1 (802.15.4)

(0)
Description: This is the very popular 2.4GHz XBee module from Digi. These modules take the 802.15.4 stack (the basis for Zigbee) and wrap it into a simple to use serial command set. These modules allow very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point...
BDT 2,350.00
BDT 2,350.00 tax incl.
BDT 2,350.00 tax excl.
BDT 2,350.00 tax excl.
BDT 2,350.00 tax incl.
BDT 2,350.00 tax incl.
BDT 0.00 Tax
BDT 2,350.00 tax excl.
BDT 2,350.00 tax excl.
BDT 0.00 Tax
BDT 2,350.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2430

6 Pin JST XH Cable Connector Female to Open - 2.54mm Pitch 20cm

(0)
This 6-wire cable has a length of slightly over 20cm and is equipped with JST-PH female 6-pin connectors at one ends. Such JST cables are frequently used with compact rechargeable battery packs, RC receivers and transmitters, miniature cameras, and other small electronic devices.
BDT 50.00
BDT 50.00 tax incl.
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 50.00 tax incl.
BDT 50.00 tax incl.
BDT 0.00 Tax
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 0.00 Tax
BDT 50.00 tax incl.
More
In stock
In stock: 28

Reference: RBD-0169

Flex Sensor 2.2"

(0)
Flex length: 5.6 cm. Total Length: 2.2″ (7 cm). Life Cycle : >1 million. Height : 0.43mm (0.017″), Flat Resistance: 10K Ohms ±30%. Power Rating: 0.5 Watts.
BDT 1,250.00
BDT 1,250.00 tax incl.
BDT 1,250.00 tax excl.
BDT 1,250.00 tax excl.
BDT 1,250.00 tax incl.
BDT 1,250.00 tax incl.
BDT 0.00 Tax
BDT 1,250.00 tax excl.
BDT 1,250.00 tax excl.
BDT 0.00 Tax
BDT 1,250.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-0904

Solderable Cable Red and Black Pair

(0)
Pair of wires for soldering with DC motors DC applications, breadboards, electronics, and robotics DIY projects Length: 120mm
BDT 12.00
BDT 12.00 tax incl.
BDT 12.00 tax excl.
BDT 12.00 tax excl.
BDT 12.00 tax incl.
BDT 12.00 tax incl.
BDT 0.00 Tax
BDT 12.00 tax excl.
BDT 12.00 tax excl.
BDT 0.00 Tax
BDT 12.00 tax incl.
More
In Stock
In stock: 2265

Reference: RBD-0391

AD8232 ECG Measurement Module Kit

(0)
Designed to extract, amplify, and filter small biopotential signals. Leads-Off Detection. Shutdown Pin. LED Indicator. Analog Output. 3.5 mm Jack for Biomedical Pad Connection. RoboticsBD
BDT 790.00
BDT 790.00 tax incl.
BDT 790.00 tax excl.
BDT 790.00 tax excl.
BDT 790.00 tax incl.
BDT 790.00 tax incl.
BDT 0.00 Tax
BDT 790.00 tax excl.
BDT 790.00 tax excl.
BDT 0.00 Tax
BDT 790.00 tax incl.
More
In-Stock
In stock: 13

Reference: RBD-0176

Brand: SparkFun Electronics

Rover 5 Robot Platform 4 Motors 4 Encoders

(0)
Arduino Compatible Easy to assemble Adjustable gear box angles 4 independent DC motors 4 independent hall-effect encoders Thick rubber tank treads 10Kg/cm stall torque per motor
BDT 5,999.00
BDT 5,999.00 tax incl.
BDT 5,999.00 tax excl.
BDT 5,999.00 tax excl.
BDT 5,999.00 tax incl.
BDT 5,999.00 tax incl.
BDT 0.00 Tax
BDT 5,999.00 tax excl.
BDT 5,999.00 tax excl.
BDT 0.00 Tax
BDT 5,999.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-2615

1 Meter Twisted Electrical Flexible Wire - Red Black

(0)
Flexible-SC(FR) cable with 1x0.4 rm gauge size, red & black color, and flame-retardant insulation material. Designed for electrical use in a variety of applications.
BDT 45.00
BDT 45.00 tax incl.
BDT 45.00 tax excl.
BDT 45.00 tax excl.
BDT 45.00 tax incl.
BDT 45.00 tax incl.
BDT 0.00 Tax
BDT 45.00 tax excl.
BDT 45.00 tax excl.
BDT 0.00 Tax
BDT 45.00 tax incl.
More
In-Stock
In stock: 74

Reference: RBD-0180

Brand: SparkFun Electronics

Makey Makey Kit

(0)
Description: This is the same product as the Makey Makey Standard Kit. The difference is this version comes in fancy clamshell packaging meant for our distributors that need it. Regular customers are welcome to order, but we want to limit the amount of extra packaging finding its way into the trash heap.
BDT 5,500.00
BDT 5,500.00 tax incl.
BDT 5,500.00 tax excl.
BDT 5,500.00 tax excl.
BDT 5,500.00 tax incl.
BDT 5,500.00 tax incl.
BDT 0.00 Tax
BDT 5,500.00 tax excl.
BDT 5,500.00 tax excl.
BDT 0.00 Tax
BDT 5,500.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-2639

Male to Male Jumper Wires 20 Pcs 20cm

(0)
Connect components on breadboards and PCBs easily. 20 pre-crimped jumper wires for versatile use. 20cm length for convenient connections. Male-to-male connector design for simple use. Colorful for easy identification and organization.
BDT 55.00
BDT 55.00 tax incl.
BDT 55.00 tax excl.
BDT 55.00 tax excl.
BDT 55.00 tax incl.
BDT 55.00 tax incl.
BDT 0.00 Tax
BDT 55.00 tax excl.
BDT 55.00 tax excl.
BDT 0.00 Tax
BDT 55.00 tax incl.
More
In-Stock
In stock: 7

Reference: RBD-0117

Line Following Robot Kit 2021

(0)
Package Name: Line Following Kit Year: 2021 Arduino Uno  L298n motor shield Line Following Sensor 5 Array Breadboard medium Tp4056 with 1 cell holder (Charger)
BDT 2,899.00
BDT 2,899.00 tax incl.
BDT 2,899.00 tax excl.
BDT 2,899.00 tax excl.
BDT 2,899.00 tax incl.
BDT 2,899.00 tax incl.
BDT 0.00 Tax
BDT 2,899.00 tax excl.
BDT 2,899.00 tax excl.
BDT 0.00 Tax
BDT 2,899.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-2640

Male to Female Jumper Wires 20 Pcs 20cm

(0)
Connect components on breadboards and PCBs with ease. 20 pre-crimped jumper wires for versatile use. 20cm length for convenient connections. Male-to-female connector design for flexible connections. Colorful for easy identification and organization.
BDT 55.00
BDT 55.00 tax incl.
BDT 55.00 tax excl.
BDT 55.00 tax excl.
BDT 55.00 tax incl.
BDT 55.00 tax incl.
BDT 0.00 Tax
BDT 55.00 tax excl.
BDT 55.00 tax excl.
BDT 0.00 Tax
BDT 55.00 tax incl.
More
In-Stock
In stock: 27

Reference: RBD-0189

Brand: DFRobot

Xbee Shield for Arduino (without Xbee)

(0)
Xbee Shield for Arduino (without Xbee) INTRODUCTION: The XBee Expansion Board is a compliant solution designed to meet low-cost, low-power wireless sensor networks with special needs.The module is easy to use, low power consumption, and the provision of critical data between devices reliable transmission.
BDT 1,200.00
BDT 1,200.00 tax incl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax incl.
BDT 1,200.00 tax incl.
BDT 0.00 Tax
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 0.00 Tax
BDT 1,200.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-2641

Female to Female Jumper Wires 20 Pcs 20cm

(0)
Connect components on breadboards and PCBs with ease. 20 pre-crimped jumper wires for versatile use. 20cm length for convenient connections. Female-to-female connector design for flexible connections. Colorful for easy identification and organization.
BDT 55.00
BDT 55.00 tax incl.
BDT 55.00 tax excl.
BDT 55.00 tax excl.
BDT 55.00 tax incl.
BDT 55.00 tax incl.
BDT 0.00 Tax
BDT 55.00 tax excl.
BDT 55.00 tax excl.
BDT 0.00 Tax
BDT 55.00 tax incl.
More
In-Stock
In stock: 112

Reference: RBD-0032

Arduino Nano

(0)
USB Driver: CH340 Operating Voltage (logic level): 5V With Mini USB 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please select...
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In-Stock
In stock: 549

Reference: RBD-2648

Jumper Wire - 4 pin Ribbon Cable 10cm

(0)
Jumper Wire - 4 pin Ribbon Cable 10cm Medium quality 4-wire cable Length: 4" (10cm) Features a 4-pin tin-plated JST female connector with 0.1" spacing on both ends Versatile for various board-to-board connections Color may vary
BDT 30.00
BDT 30.00 tax incl.
BDT 30.00 tax excl.
BDT 30.00 tax excl.
BDT 30.00 tax incl.
BDT 30.00 tax incl.
BDT 0.00 Tax
BDT 30.00 tax excl.
BDT 30.00 tax excl.
BDT 0.00 Tax
BDT 30.00 tax incl.
More
In-Stock
In stock: 45

Reference: RBD-0195

Brand: RoboticsBD

25mW Infrared Line Laser Light

(0)
25mW Infrared Line Laser Light
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
In-stock
In stock: 22

Reference: RBD-2705

Micro USB Data Cable - 1 Meter

(0)
Micro USB data cable with an 8mm extended connector for phones and tablets with deep ports. Supports both charging and data transfer for versatile use. Tangle-free cable material ensures easy use and prevents knots. 1-meter length provides convenient reach for charging and data syncing.
BDT 199.00
BDT 199.00 tax incl.
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 199.00 tax incl.
BDT 199.00 tax incl.
BDT 0.00 Tax
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 0.00 Tax
BDT 199.00 tax incl.
More
In-Stock
In stock: 25

Reference: RBD-0208

Off-Road Wheels - 130x60mm (Pair)

(0)
"Take on any terrain with our burly off-road wheels." "Get the grip and stability you need with our deep-treaded tires." "Easy-to-mount and built to last - our off-road wheels won't let you down."
BDT 1,450.00
BDT 1,450.00 tax incl.
BDT 1,450.00 tax excl.
BDT 1,450.00 tax excl.
BDT 1,450.00 tax incl.
BDT 1,450.00 tax incl.
BDT 0.00 Tax
BDT 1,450.00 tax excl.
BDT 1,450.00 tax excl.
BDT 0.00 Tax
BDT 1,450.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0416

TTP229 8 Channel Digital Capacitive Switch Touch Sensor Module for Arduino

(0)
Onboard 8 key TTP226 capacitive touch induction IC. RoboticsBD Onboard 8-way level indicator. Working voltage: 2.4 to 5.5 V. Modules, you can set the output mode, key output mode, the longest time and fast/low power output
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 20

Reference: RBD-0332

Jumper Wire - 3 pin Ribbon Cable 10cm

(0)
Jumper Wire - 3 pin Ribbon Cable 10cm Medium quality 3-wire cable Length: 4" (10cm) Features a 3-pin tin-plated JST female connector with 0.1" spacing on both ends Versatile for various board-to-board connections Color may vary
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-0217

Servo Motor Micro MG90S 180 Degree Rotation

(0)
Model: MG90S Weight: 13 gm Operating voltage: 4.8V~ 6.6V Servo Plug: JR Stall torque @4.8V : 1.8kg-cm Stall torque @6.6V : 2.2kg-cm Note: The component, colour & shape of the motor may vary depending on our stock rotation.
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 330

Reference: RBD-0333

Jumper Wire - 5 pin Ribbon Cable 10cm

(0)
Jumper Wire - 5 pin Ribbon Cable 10cm Medium quality 5-wire cable Length: 4" (10cm) Features a 5-pin tin-plated JST female connector with 0.1" spacing on both ends Versatile for various board-to-board connections Color may vary
BDT 35.00
BDT 35.00 tax incl.
BDT 35.00 tax excl.
BDT 35.00 tax excl.
BDT 35.00 tax incl.
BDT 35.00 tax incl.
BDT 0.00 Tax
BDT 35.00 tax excl.
BDT 35.00 tax excl.
BDT 0.00 Tax
BDT 35.00 tax incl.
More
In-Stock
In stock: 7

Reference: RBD-0226

Brand: SparkFun Electronics

Camera Module - pcDuino V3 (2MP)

(0)
Camera Module - pcDuino V3 (2MP)
BDT 2,000.00
BDT 2,000.00 tax incl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax incl.
BDT 2,000.00 tax incl.
BDT 0.00 Tax
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 0.00 Tax
BDT 2,000.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0234

Brand: SparkFun Electronics

LCD Cape - pcDuino V3 (1024x600 7" LVDS)

(0)
Description: This is a 7" LVDS LCD Cape for the pcDuino V3  with a 1024x600 screen resolution and capacitive touch from  LinkSprite. This massive screen is a great addition for the  pcDuino V3 that compliments its extreme versatility as a mini  PC development platform. 
BDT 7,500.00
BDT 7,500.00 tax incl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax incl.
BDT 7,500.00 tax incl.
BDT 0.00 Tax
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 0.00 Tax
BDT 7,500.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0163

HSM-20G Analog Temperature & Humidity Sensor

(0)
Product Type: Humidity Module Sensor Working voltage range DC 5.0±0.2V    Output voltage range (corresponding to 0-100%RH) DC 1-3.19V    Test accuracy 5% RH
BDT 950.00
BDT 950.00 tax incl.
BDT 950.00 tax excl.
BDT 950.00 tax excl.
BDT 950.00 tax incl.
BDT 950.00 tax incl.
BDT 0.00 Tax
BDT 950.00 tax excl.
BDT 950.00 tax excl.
BDT 0.00 Tax
BDT 950.00 tax incl.
More
In-Stock
In stock: 50

Reference: RBD-0153

Solderable Cable Red and Black Pair - 20cm

(0)
Pair of wires for soldering with DC motors DC applications, breadboards, electronics, and robotics DIY projects Length: 200mm
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
Out-of-Stock
In stock: -78

Follow us on Facebook