Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 2.00 - BDT 204,035.00

Categories

Categories

Brand

Brand

Condition

Condition

Weight

Weight

  • 0 kg - 28,800 kg

Resistor Pack of 5

Resistor Pack of 5

  • Banner

Active filters
  • Categories: 3D Printer
  • Categories: Components
  • Categories: Display
  • Categories: HMI
  • Categories: Motor Driver
  • Categories: Raspberry Pi
  • Categories: Sensors

Reference: RBD-1386

Brand: Anycubic

Colored UV Resin 500mL Black

(0)
Wavelength(nm): 395-405 Color: Black Density(g/m^3): 1.08-1.13 Hardness(Shore D):79.0 Tensile Strength(MPa): 46-67 Elongation at Break(%):28-35
BDT 2,990.00
BDT 2,990.00 tax incl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax incl.
BDT 2,990.00 tax incl.
BDT 0.00 Tax
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 0.00 Tax
BDT 2,990.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0684

Motor Driver - Dual TB6612FNG (1A)

(0)
CW/CCW/short break/stop motor control modes Built-in thermal shutdown circuit and a low voltage detecting circuit Standby control to save power CW/CCW/short brake/stop motor control modes Operating Voltage(VDC): 15 Peak Current (A): 3.2 Continuous Current (A): 1.2 No. of Channels: 1
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-0399

Graphic LCD 84x48 (Nokia 5110) Black on White for Arduino

(0)
Power supply voltage: 2.7 V-3.3 V/5 V Data interface level: 2.7-5V. Resolution: 84 x 48 pixel Backlight power supply voltage: highest 3.3 V. Backlight: Blue. RoboticsBD Note: Current stock is tested by us. 
BDT 260.00
BDT 260.00 tax incl.
BDT 260.00 tax excl.
BDT 260.00 tax excl.
BDT 260.00 tax incl.
BDT 260.00 tax incl.
BDT 0.00 Tax
BDT 260.00 tax excl.
BDT 260.00 tax excl.
BDT 0.00 Tax
BDT 260.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0226

Brand: SparkFun Electronics

Camera Module - pcDuino V3 (2MP)

(0)
Camera Module - pcDuino V3 (2MP)
BDT 2,000.00
BDT 2,000.00 tax incl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax incl.
BDT 2,000.00 tax incl.
BDT 0.00 Tax
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 0.00 Tax
BDT 2,000.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0152

SW-420 NC Type Vibration Sensor Module

(0)
Using SW-420 normally closed type vibration sensor Comparator output, clean signal, good waveform, strong driving ability, >15mA Operating voltage 3.3V ~ 5V Output format: digital switching output (0 and 1) Using a wide voltage LM393 comparator With bolt holes for easy installation
BDT 90.00
BDT 90.00 tax incl.
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 90.00 tax incl.
BDT 90.00 tax incl.
BDT 0.00 Tax
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 0.00 Tax
BDT 90.00 tax incl.
More
In-Stock
In stock: 195

Reference: RBD-2386

Brand: Raspberry Pi Official

Raspberry Pi Pico W

(0)
The Raspberry Pi Pico W builds upon the great cost-for-performance metrics of the Pico and add WiFi to the board. The Pico W features the same attributes as the Raspberry Pi Pico and also incorporates an Infineon CYW43439 wireless chip. CYW43439 supports IEEE 802.11 b/g/n wireless LAN, and Bluetooth® 5.2. (6/30/2022: Only Wireless LAN is supported on the...
BDT 1,449.00
BDT 1,449.00 tax incl.
BDT 1,449.00 tax excl.
BDT 1,449.00 tax excl.
BDT 1,449.00 tax incl.
BDT 1,449.00 tax incl.
BDT 0.00 Tax
BDT 1,449.00 tax excl.
BDT 1,449.00 tax excl.
BDT 0.00 Tax
BDT 1,449.00 tax incl.
More
In stock
In stock: 117

Reference: RBD-0703

SSC-32 32Ch Servo Controller Lynxmotion Compatible

(0)
Controls up to 32 servo motors Comes preassembled USB interface (cable included), Xbee socket, and TTL serial Bidirectional communication with Query commands Large capacitors to prevent brownouts
BDT 3,400.00
BDT 3,400.00 tax incl.
BDT 3,400.00 tax excl.
BDT 3,400.00 tax excl.
BDT 3,400.00 tax incl.
BDT 3,400.00 tax incl.
BDT 0.00 Tax
BDT 3,400.00 tax excl.
BDT 3,400.00 tax excl.
BDT 0.00 Tax
BDT 3,400.00 tax incl.
More
In-Stock
In stock: 7

Reference: RBD-0401

LCD Module 8x2 Characters Display

(0)
Display: 8×2 character Outline: 58.0x32.0x10.0 VA: 37.8x16.0 Controller: SPLC780D Character: 2.96x5.56 Driver: 1/16
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 46

Reference: RBD-0156

TCS230 TCS3200 Color Sensor Recognition Module

(0)
Operating Voltage: 3V-5V High-resolution conversion of light intensity to frequency. Chip pins all has drawn for standard 100. Put the needle (2.54 mm). Mil-convenient for bitmap board. Programmable color and full-scale output frequency. Communicate directly with a microcontroller. Low-profile surface mount package.
BDT 515.00 BDT 550.00
BDT 550.00 BDT 515.00 tax incl.
BDT 550.00 BDT 515.00 tax excl.
BDT 550.00 BDT 515.00 tax excl.
BDT 550.00 BDT 515.00 tax incl.
BDT 550.00 BDT 515.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 550.00 BDT 515.00 tax excl.
BDT 550.00 BDT 515.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 550.00 BDT 515.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-1599

Brand: Raspberry Pi Official

Raspberry Pi Pico

(0)
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Temperature sensor
BDT 870.00 BDT 930.00
BDT 930.00 BDT 870.00 tax incl.
BDT 930.00 BDT 870.00 tax excl.
BDT 930.00 BDT 870.00 tax excl.
BDT 930.00 BDT 870.00 tax incl.
BDT 930.00 BDT 870.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 930.00 BDT 870.00 tax excl.
BDT 930.00 BDT 870.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 930.00 BDT 870.00 tax incl.
More
In-Stock
In stock: 116

Reference: RBD-0815

3D Pen 2nd Generation LED Display Screen with (6 Color Filament)

(0)
Input Voltage: 100-240 V AC. Temp: 160~230 Deg settable. Filament: 1.75 mm PLA or ABS. This 3D Pen is designed for the freehand drawing of 3-Dimensional objects Adjustable output speed, temperature Create projects horizontally or vertically Every 3d pen will be checked and tested on our lab before shipping, so you will not received "intact" package. No...
BDT 2,499.00
BDT 2,499.00 tax incl.
BDT 2,499.00 tax excl.
BDT 2,499.00 tax excl.
BDT 2,499.00 tax incl.
BDT 2,499.00 tax incl.
BDT 0.00 Tax
BDT 2,499.00 tax excl.
BDT 2,499.00 tax excl.
BDT 0.00 Tax
BDT 2,499.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0742

Motor Driver 43A BTS7960

(0)
Input voltage(V): 6 – 27. Maximum current(A): 43. Input level(V): 3.3 – 5. Duty cycle: 0 – 100%. Path resistance: 16 mΩ at 25°C. Low quiescent current: 7 µA at 25°C.
BDT 670.00
BDT 670.00 tax incl.
BDT 670.00 tax excl.
BDT 670.00 tax excl.
BDT 670.00 tax incl.
BDT 670.00 tax incl.
BDT 0.00 Tax
BDT 670.00 tax excl.
BDT 670.00 tax excl.
BDT 0.00 Tax
BDT 670.00 tax incl.
More
In-Stock
In stock: 44

Reference: RBD-0661

Standard LCD 16x2 Display Yellow Backlight

(0)
For Standard LCD 16x2 with Male Header. Press here For Standard LCD 16x2 with Female Header. Press here For Standard LCD 16x2 with I2C adapter board soldered. Press here. For Standard LCD 16x2 with White Background. Press here. For Standard LCD 16x2 with Blue Background. Press here.
BDT 240.00
BDT 240.00 tax incl.
BDT 240.00 tax excl.
BDT 240.00 tax excl.
BDT 240.00 tax incl.
BDT 240.00 tax incl.
BDT 0.00 Tax
BDT 240.00 tax excl.
BDT 240.00 tax excl.
BDT 0.00 Tax
BDT 240.00 tax incl.
More
In-Stock
In stock: 307

Reference: 0245

Kiloohm (KΩ) 1/4w Resistors - Pack of 5

(0)
Choose your desire Resistor value from below: 
BDT 5.00
BDT 5.00 tax incl.
BDT 5.00 tax excl.
BDT 5.00 tax excl.
BDT 5.00 tax incl.
BDT 5.00 tax incl.
BDT 0.00 Tax
BDT 5.00 tax excl.
BDT 5.00 tax excl.
BDT 0.00 Tax
BDT 5.00 tax incl.
More
In-Stock
In stock: 614

Reference: RBD-0222

35mm Piezo Ceramic Elements Sound Sensor

(0)
Sound pressure level: 85DB 10cm The input voltage: 30vp-p max Ultra-thin and lightweight Low power consumption for voltage type Operating Temperature: -20~70 Storage Temperature: -30-80 Clear sound
BDT 50.00 BDT 65.00
BDT 65.00 BDT 50.00 tax incl.
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax incl.
BDT 65.00 BDT 50.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 65.00 BDT 50.00 tax excl.
BDT 65.00 BDT 50.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 65.00 BDT 50.00 tax incl.
More
In-Stock
In stock: 387

Reference: RBD-2012

Brand: Raspberry Pi Official

Raspberry Pi Pico With Soldered Headers

(0)
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Onboard temperature sensor
BDT 970.00 BDT 1,070.00
BDT 1,070.00 BDT 970.00 tax incl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax incl.
BDT 1,070.00 BDT 970.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 1,070.00 BDT 970.00 tax excl.
BDT 1,070.00 BDT 970.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 1,070.00 BDT 970.00 tax incl.
More
In-Stock
In stock: 6

Reference: RBD-1683

PLA Filament for 3D Pen

(0)
Compatible with 3D pen 15gram-17gram 1.75mm Random Color
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 175

Reference: RBD-1606

L297 Stepper Motor Controller IC

(0)
Supply Voltage Range: 4.75V to 7V Driver Case Style: DIP No. of Pins: 20 Operating Temperature Range: -40°C to +150°C
BDT 96.00
BDT 96.00 tax incl.
BDT 96.00 tax excl.
BDT 96.00 tax excl.
BDT 96.00 tax incl.
BDT 96.00 tax incl.
BDT 0.00 Tax
BDT 96.00 tax excl.
BDT 96.00 tax excl.
BDT 0.00 Tax
BDT 96.00 tax incl.
More
In-Stock
In stock: 46

Reference: RBD-0699

1.8" inch TFT LCD Display module ST7735S 128x160

(0)
Display Size: 1.8″ Driver IC: ST7735 Input Voltage (V): 3.3 to 5 Pixel Resolution: 128 x 160 Interface Type: SPI
BDT 590.00
BDT 590.00 tax incl.
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 590.00 tax incl.
BDT 590.00 tax incl.
BDT 0.00 Tax
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 0.00 Tax
BDT 590.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-0264

Brand: SparkFun Electronics

Lockitron Mechanical Assembly

(0)
Lockitron Mechanical Assembly The Lockitron Mechanical Assembly from SparkFun is a perfect solution for the DIY home automation or Internet of Things (IoT) enthusiast, whether you want to make your life easier by not awkwardly fumbling with keys or add some extra security in your home with three-factor authentication.
BDT 6,000.00
BDT 6,000.00 tax incl.
BDT 6,000.00 tax excl.
BDT 6,000.00 tax excl.
BDT 6,000.00 tax incl.
BDT 6,000.00 tax incl.
BDT 0.00 Tax
BDT 6,000.00 tax excl.
BDT 6,000.00 tax excl.
BDT 0.00 Tax
BDT 6,000.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0150

5mW Adjustable Laser Dot Diode Module

(0)
Output Power: 5mW Working Voltage: 3-3.3V DC Working temperature: -10 ℃~+40 ℃ Housing material: Copper Working life: more than 2000 hours Spot mode: Dot Facula (continuous output) Laser wavelength: 650nm red-colored. Operating current: <40mA Power lead length: 120mm. 5V could damage the laser
BDT 26.00
BDT 26.00 tax incl.
BDT 26.00 tax excl.
BDT 26.00 tax excl.
BDT 26.00 tax incl.
BDT 26.00 tax incl.
BDT 0.00 Tax
BDT 26.00 tax excl.
BDT 26.00 tax excl.
BDT 0.00 Tax
BDT 26.00 tax incl.
More
In-Stock
In stock: 164

Reference: RBD-1734

Dual GPIO Expander for Raspberry Pi Pico, Two Sets of Male Headers

(0)
Center female pin header for direct attaching the Raspberry Pi Pico. Extra USB connector for external power supply. Immersion Gold Process Black Base Panel, White Pinout Labels, Golden Rounded Outline, Stunning Aesthetic *Please make sure there are no pin conflicts between the modules you want to use together before connecting. Raspberry Pi Pico and...
BDT 1,040.00
BDT 1,040.00 tax incl.
BDT 1,040.00 tax excl.
BDT 1,040.00 tax excl.
BDT 1,040.00 tax incl.
BDT 1,040.00 tax incl.
BDT 0.00 Tax
BDT 1,040.00 tax excl.
BDT 1,040.00 tax excl.
BDT 0.00 Tax
BDT 1,040.00 tax incl.
More
In-Stock
In stock: 12

Reference: RBD-1678

Big Easy Driver - Stepper Motor Driver

(0)
2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-0924

TM1637 LED Display Module for Arduino

(0)
Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 30 mA Display Dimensions: 42x24x12 (LxWxH) mm
BDT 120.00
BDT 120.00 tax incl.
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 120.00 tax incl.
BDT 120.00 tax incl.
BDT 0.00 Tax
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 0.00 Tax
BDT 120.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0313

RC522 RFID Card Reader Module Kit Android NFC supported

(0)
Low power consumption, Low cost, and Compact size Read and write chip Fully integrated at 13.56MHz
BDT 195.00
BDT 195.00 tax incl.
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 195.00 tax incl.
BDT 195.00 tax incl.
BDT 0.00 Tax
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 0.00 Tax
BDT 195.00 tax incl.
More
In-Stock
In stock: 239

Reference: RBD-0265

QR701 58mm Embedded Receipt MIni Thermal Printer

(0)
Printing method: Thermal dot printing Printing speed: 50 - 80mm/s Resolution: 8 points/mm, 384 points/line Effective print width: 48mm Character set: ASCII, GB2312-80 (Chinese)
BDT 3,790.00
BDT 3,790.00 tax incl.
BDT 3,790.00 tax excl.
BDT 3,790.00 tax excl.
BDT 3,790.00 tax incl.
BDT 3,790.00 tax incl.
BDT 0.00 Tax
BDT 3,790.00 tax excl.
BDT 3,790.00 tax excl.
BDT 0.00 Tax
BDT 3,790.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-1971

Brand: DFRobot

Gravity: Expansion Board for Raspberry Pi Pico

(0)
Gravity Expansion Board Designed for Raspberry Pi Pico Compatible with a variety of Gravity sensors and modules. Gravity Expansion Board for Pico All pins brought out, no soldering required Additional Communication Ports: Digital IO, Analog IO, I2C, SPI, UART, GDI Note: The product not include Raspberry Pi Pico. Buy Raspberry Pi Pico here. Buy Raspberry...
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-1635

Dual Channel Motor Driver Shield For Arduino

(0)
Logic control, 5V from Arduino main board Polarity protection for External motor power input 2 fast test buttons for each motor channel Motor Driven Voltage:6.5 to 12VDC(VIN Power Supply), 5.0 to 26VDC (External Power Source) Up to 2A current each channel Pin 4, 5,6,7 are used to drive two DC motor Support PWM speed control Support  advance speed control
BDT 1,399.00
BDT 1,399.00 tax incl.
BDT 1,399.00 tax excl.
BDT 1,399.00 tax excl.
BDT 1,399.00 tax incl.
BDT 1,399.00 tax incl.
BDT 0.00 Tax
BDT 1,399.00 tax excl.
BDT 1,399.00 tax excl.
BDT 0.00 Tax
BDT 1,399.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-1064

1.3 Inch I2C OLED Display Module 4pin- Blue

(0)
Size: 1.3 inch Resolution: 128 x 64 Controlling Chip: SSH1106 Driving Voltage: 3.3-5V Operating Temperature: -40~70 celsius Interface Type: IIC Light Color: Blue If you want to purchase White color 1.3 inch OLED display module click here
BDT 630.00
BDT 630.00 tax incl.
BDT 630.00 tax excl.
BDT 630.00 tax excl.
BDT 630.00 tax incl.
BDT 630.00 tax incl.
BDT 0.00 Tax
BDT 630.00 tax excl.
BDT 630.00 tax excl.
BDT 0.00 Tax
BDT 630.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0436

3D Printer Controller for RAMPS 1.4 REPRAP MENDEL PRUSA

(0)
Supply Voltage: 12V Standard interfaces (as that of the extruder) Reserved GCI like I2C and RS232 3 MOSFET’s are applied to the heater/ fan and thermistor circuit. Another 5A added to protect the component parts. An 11A fuse is added to the hotbed. Support 5 stepper drive board
BDT 2,000.00
BDT 2,000.00 tax incl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax incl.
BDT 2,000.00 tax incl.
BDT 0.00 Tax
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 0.00 Tax
BDT 2,000.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-0241

LM35 Temperature Sensor

(0)
Calibrated directly in Degree Celsius (Centigrade) Linear at 10.0 mV/°C scale factor 0.5°C accuracy guarantee-able (at a25°C) Suitable for remote applications Low cost due to wafer-level trimming Operates from 4 to 30 volts Less than 60 mA current drain Low self-heating, 0.08°C in still air Non-linearity only 0.25°C typical  LM35 (working) tested by...
BDT 155.00
BDT 155.00 tax incl.
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 155.00 tax incl.
BDT 155.00 tax incl.
BDT 0.00 Tax
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 0.00 Tax
BDT 155.00 tax incl.
More
In-Stock
In stock: 75

Reference: RBD-1724

DC-5V-35V 5A PWM Motor Speed Controller

(0)
Operating voltage: DC4.5V-35V Output current: 0-5A Output power: 90W (max) PWM duty cycle: 1% -100%. PWM frequency:20khz Wide voltage DC motor speed controller.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In-Stock
In stock: 74

Follow us on Facebook