Home

  • Banner

Active filters
  • Categories: 3D Printer
  • Categories: Display
  • Categories: Enclosure
  • Categories: HMI
  • Categories: Thermal Printer
  • Condition: New
Nema 17 Stepper Motor 17HS4401S Robotics Bangladesh Quick view

Reference: RBD-1390

Nema 17 Stepper Motor 17HS4401S

(0)
Nema17 Bipolar. Number of Phases: 2. Step Angle: 1.8°. Phase Voltage: 2.6Vdc. Phase Current: 1.7A. Resistance: 1.5Ω ±10%. Inductance: 2.8mH ±20% (1KHz). Number of Wire: 4 (100cm Length). Holding Torque: 43N.cm. Shaft Diameter: Ø5mm. Motor Length: 40mm. Mass: 270g.
BDT 1,350.00
BDT 1,350.00 tax incl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax incl.
BDT 1,350.00 tax incl.
BDT 0.00 Tax
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 0.00 Tax
BDT 1,350.00 tax incl.
More
In-Stock
In stock: 43
Nextion NX8048T050 - 5.0" LCD TFT HMI Touch Display Robotics Bangladesh Quick view

Reference: RBD-1218

Nextion NX8048T050 - 5.0" LCD TFT HMI Touch Display

(0)
Model No.:NX8048T050 Display Type:011R(R:Resitive Touchscreen) Operating Voltage (VDC):4.75 ~ 7 Max. Operating Current (mA):410 Touch Type: Resistive Colors:65K (65536)
BDT 10,590.00
BDT 10,590.00 tax incl.
BDT 10,590.00 tax excl.
BDT 10,590.00 tax excl.
BDT 10,590.00 tax incl.
BDT 10,590.00 tax incl.
BDT 0.00 Tax
BDT 10,590.00 tax excl.
BDT 10,590.00 tax excl.
BDT 0.00 Tax
BDT 10,590.00 tax incl.
More
In-Stock
In stock: 6
Micro Limit Switches Robotics Bangladesh Quick view

Reference: RBD-1369

Micro Limit Switches

(0)
Lifetime: 30 million Rated voltage:125V Rated current: 5A Dissipation Power: IC Supply voltage: IC KW11-3Z bearing microswitch.
BDT 130.00
BDT 130.00 tax incl.
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 130.00 tax incl.
BDT 130.00 tax incl.
BDT 0.00 Tax
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 0.00 Tax
BDT 130.00 tax incl.
More
In-Stock
In stock: 50
3.5inch Touch LCD Shield for Arduino Robotics Bangladesh Quick view

Reference: RBD-1219

3.5inch LCD Display Shield for Arduino

(0)
Supports development boards such as Arduino UNO and Mega2560 for plug-in use without wiring 480X320 resolution, clear display Support 16-bit RGB 65K color display, display rich colors 8-bit parallel bus, faster than serial SPI refresh On-board 5V/3.3V level shifting IC, compatible with 5V/3.3V operating voltage Easy to expand the experiment with SD card...
BDT 1,680.00
BDT 1,680.00 tax incl.
BDT 1,680.00 tax excl.
BDT 1,680.00 tax excl.
BDT 1,680.00 tax incl.
BDT 1,680.00 tax incl.
BDT 0.00 Tax
BDT 1,680.00 tax excl.
BDT 1,680.00 tax excl.
BDT 0.00 Tax
BDT 1,680.00 tax incl.
More
In-Stock
In stock: 8
Big Easy Driver - Stepper Motor Driver Robotics Bangladesh Quick view

Reference: RBD-1678

Big Easy Driver - Stepper Motor Driver

(0)
2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 28
7 Inch TFT IPS Monitor for Raspberry Pi Robotics Bangladesh Quick view

Reference: RBD-1251

7 Inch TFT IPS Monitor for Raspberry Pi

(0)
Input Voltage: DC 7.4~35V. Input Current: DC 0.5A-1.5A. Power Consumption: ≤8W Watts. Resolution: 1024 x 600. Aspect Ratio: 16:9 & 4:3. Contrast Ratio: 500:1. Monitor Mount is not Available.
BDT 6,390.00
BDT 6,390.00 tax incl.
BDT 6,390.00 tax excl.
BDT 6,390.00 tax excl.
BDT 6,390.00 tax incl.
BDT 6,390.00 tax incl.
BDT 0.00 Tax
BDT 6,390.00 tax excl.
BDT 6,390.00 tax excl.
BDT 0.00 Tax
BDT 6,390.00 tax incl.
More
In-Stock
In stock: 10
Out-of-Stock Makeblock XY-Plotter Robot Kit V2 Robotics Bangladesh Quick view

Reference: RBD-1312

Makeblock XY-Plotter Robot Kit V2

(0)
XY plotter robot kit is a drawing robot Supports Pen and Pencil Supports Laser Engraving
BDT 25,800.00
BDT 25,800.00 tax incl.
BDT 25,800.00 tax excl.
BDT 25,800.00 tax excl.
BDT 25,800.00 tax incl.
BDT 25,800.00 tax incl.
BDT 0.00 Tax
BDT 25,800.00 tax excl.
BDT 25,800.00 tax excl.
BDT 0.00 Tax
BDT 25,800.00 tax incl.
More
Out-of-Stock
In stock: 0
0.56 Inch 3 Digit 7 Segment Red Common Cathode Display Robotics Bangladesh Quick view

Reference: RBD-1108

0.56 Inch 3 Digit 7 Segment Red Common Cathode Display

(0)
Bright Red LED chip, which is made from AlGaAs on GaAs substrate Blackface and RED LED segments Type: Common cathode No. of Pins: 12 Low Current Consumption High Brightness
BDT 50.00
BDT 50.00 tax incl.
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 50.00 tax incl.
BDT 50.00 tax incl.
BDT 0.00 Tax
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 0.00 Tax
BDT 50.00 tax incl.
More
In-Stock
In stock: 93
Out-of-Stock mDrawbot kit Robotics Bangladesh Quick view

Reference: RBD-1311

mDrawbot kit

(0)
mDrawBot is a 4-in-1 drawing robot kit  it can be assembled into 4 different drawing robots:  mScara. mCar.  mSpider.  mEggBot.
BDT 21,300.00
BDT 21,300.00 tax incl.
BDT 21,300.00 tax excl.
BDT 21,300.00 tax excl.
BDT 21,300.00 tax incl.
BDT 21,300.00 tax incl.
BDT 0.00 Tax
BDT 21,300.00 tax excl.
BDT 21,300.00 tax excl.
BDT 0.00 Tax
BDT 21,300.00 tax incl.
More
Out-of-Stock
In stock: 0
Max7219 4 Channel Dot Matrix Display Panel Quick view

Reference: RBD-0914

MAX7219 4 Channel Dot Matrix Display Panel

(0)
Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 320 mA Display Dimensions: 32x32x6 (LxWxH) mm PCB Dimensions: 128×32 (LxW) mm
BDT 650.00
BDT 650.00 tax incl.
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 650.00 tax incl.
BDT 650.00 tax incl.
BDT 0.00 Tax
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 0.00 Tax
BDT 650.00 tax incl.
More
In-Stock
In stock: 27
Out-of-Stock Ortur Laser Master 2 20W with STM32 MCU High Speed Ortur Laser Engraver and Cutter Kit Robotics Bangladesh Quick view

Reference: RBD-1752

Ortur Laser Master 2 20W with STM32 MCU High Speed Ortur Laser Engraver and Cutter Kit

(0)
Ortur Laser Master 2 Model: Ortur OLM2-LU1-4 20W Year: 2021 Engrave Area: 400mm x 430m Available Laser Modules: 20W Model – Laser Power: 5000-5500 MW Laser Engraver and Cutter Kit
BDT 41,000.00
BDT 41,000.00 tax incl.
BDT 41,000.00 tax excl.
BDT 41,000.00 tax excl.
BDT 41,000.00 tax incl.
BDT 41,000.00 tax incl.
BDT 0.00 Tax
BDT 41,000.00 tax excl.
BDT 41,000.00 tax excl.
BDT 0.00 Tax
BDT 41,000.00 tax incl.
More
Out-of-Stock
In stock: 0
- BDT 3.00 Reduced price 0.56 Inch 1 Digit 7 Segment Red Common Cathode Display Robotics Bangladesh Quick view

Reference: RBD-1305

0.56 Inch 1 Digit 7 Segment Red Common Cathode Display

(0)
Bright Red LED chip, which is made from AlGaAs on GaAs substrate Blackface and RED LED segments Type: Common anode No. of Pins: 10 Low Current Consumption High Brightness
BDT 17.00 BDT 20.00
BDT 20.00 BDT 17.00 tax incl.
BDT 20.00 BDT 17.00 tax excl.
BDT 20.00 BDT 17.00 tax excl.
BDT 20.00 BDT 17.00 tax incl.
BDT 20.00 BDT 17.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 20.00 BDT 17.00 tax excl.
BDT 20.00 BDT 17.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 20.00 BDT 17.00 tax incl.
More
In-Stock
In stock: 99
8*8 LED matrix module common anode of LED matrix Robotics Bangladesh Quick view

Reference: RBD-1306

8*8 LED matrix module common anode of LED matrix

(0)
Easy to Install on Breadboard. Bright LED lights. Compact Design. LED Size: 3mm. Configuration: Common Anode.
BDT 95.00
BDT 95.00 tax incl.
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 95.00 tax incl.
BDT 95.00 tax incl.
BDT 0.00 Tax
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 0.00 Tax
BDT 95.00 tax incl.
More
In-Stock
In stock: 78
Out-of-Stock Anycubic I3 Mega S 3D Printer Robotics Bangladesh Quick view

Reference: 1265

Brand: Anycubic

Anycubic I3 Mega S 3D Printer

(0)
Large build volume: 210 x 210 x 205 mm User-friendly 3.5-inch touch-screen interface Can be assembled in just a few minutes Full Rigid Solid metal frame construction and superior stability High quality Ultrabase
BDT 38,999.00
BDT 38,999.00 tax incl.
BDT 38,999.00 tax excl.
BDT 38,999.00 tax excl.
BDT 38,999.00 tax incl.
BDT 38,999.00 tax incl.
BDT 0.00 Tax
BDT 38,999.00 tax excl.
BDT 38,999.00 tax excl.
BDT 0.00 Tax
BDT 38,999.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock 0.96" Inch I2C OLED Display White Robotics Bangladesh Quick view

Reference: RBD-1328

0.96" Inch I2C OLED Display White

(0)
Size: 0.96 inch Resolution: 128 x 64 Controlling Chip: SSH1106 Display Area: 21.74 x 10.86mm Driving Voltage: 3.3-5V Operating Temperature: -40~70 celsius Interface Type: IIC Light Color: White
BDT 395.00
BDT 395.00 tax incl.
BDT 395.00 tax excl.
BDT 395.00 tax excl.
BDT 395.00 tax incl.
BDT 395.00 tax incl.
BDT 0.00 Tax
BDT 395.00 tax excl.
BDT 395.00 tax excl.
BDT 0.00 Tax
BDT 395.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Anycubic I3 Mega 3D Printer Robotics Bangladesh Quick view

Reference: 1113

Brand: Anycubic

Anycubic I3 Mega 3D Printer

(0)
Large build volume: 210 x 210 x 205 mm User-friendly 3.5-inch touch-screen interface Can be assembled in just a few minutes Full Rigid Solid metal frame construction and superior stability High quality Ultrabase
BDT 30,999.00
BDT 30,999.00 tax incl.
BDT 30,999.00 tax excl.
BDT 30,999.00 tax excl.
BDT 30,999.00 tax incl.
BDT 30,999.00 tax incl.
BDT 0.00 Tax
BDT 30,999.00 tax excl.
BDT 30,999.00 tax excl.
BDT 0.00 Tax
BDT 30,999.00 tax incl.
More
Out-of-Stock
In stock: 0
PLA+ Filament 1.75mm Plastic For 3D Printer 1kg/Roll Robotics Bangladesh Quick view

Reference: RBD-2107

PLA+ Filament 1.75mm Plastic For 3D Printer 1kg/Roll

(0)
Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved
BDT 3,050.00
BDT 3,050.00 tax incl.
BDT 3,050.00 tax excl.
BDT 3,050.00 tax excl.
BDT 3,050.00 tax incl.
BDT 3,050.00 tax incl.
BDT 0.00 Tax
BDT 3,050.00 tax excl.
BDT 3,050.00 tax excl.
BDT 0.00 Tax
BDT 3,050.00 tax incl.
More
In-Stock
In stock: 13
Yellow Red Black Blue Gray Cyan Orange White Green Red Copper
I2C Graphic 128x64 LCD Adapter Robotics Bangladesh Quick view

Reference: RBD-1332

I2C Graphic 128x64 LCD Adapter

(0)
Adapter: Graphic 128x64 Communication: i2c 
BDT 499.00
BDT 499.00 tax incl.
BDT 499.00 tax excl.
BDT 499.00 tax excl.
BDT 499.00 tax incl.
BDT 499.00 tax incl.
BDT 0.00 Tax
BDT 499.00 tax excl.
BDT 499.00 tax excl.
BDT 0.00 Tax
BDT 499.00 tax incl.
More
In-Stock
In stock: 8
3D Printer Nozzle M7 Thread Brass 1. Quick view

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 28
LCD Graphic 128x64 Display ST7920 12864B Robotics Bangladesh Quick view

Reference: RBD-1335

LCD Graphic 128x64 Display ST7920 12864B

(0)
Based on ST7920 Resolution: 128 X 64 pixels Operating voltage: 5V Viewing Area: 72mm x 40mm Display mode TN/STN
BDT 995.00
BDT 995.00 tax incl.
BDT 995.00 tax excl.
BDT 995.00 tax excl.
BDT 995.00 tax incl.
BDT 995.00 tax incl.
BDT 0.00 Tax
BDT 995.00 tax excl.
BDT 995.00 tax excl.
BDT 0.00 Tax
BDT 995.00 tax incl.
More
In-Stock
In stock: 15
Creality K1 Max AI Fast 3D Printer Robotics Bangladesh Quick view

Reference: RBD-2526

Brand: Creality Official

Creality K1 Max AI Fast 3D Printer

(0)
 600mm/s Max Speed  20000mm/s² Acceleration  32mm³/s Max Flow Hotend  Hands-free Auto Leveling  Self-test with One Tap  Solve Ringing with G-sensor  Unibody Die-cast Frame AI-assisted Carefree Printing
BDT 173,525.00
BDT 173,525.00 tax incl.
BDT 173,525.00 tax excl.
BDT 173,525.00 tax excl.
BDT 173,525.00 tax incl.
BDT 173,525.00 tax incl.
BDT 0.00 Tax
BDT 173,525.00 tax excl.
BDT 173,525.00 tax excl.
BDT 0.00 Tax
BDT 173,525.00 tax incl.
More
Pre-Order (Delivery Time 1 month)
In stock: 0
LCD Display 16x2 with Female Header Robotics Bangladesh Quick view

Reference: RBD-1342

LCD Display 16x2 with Female Header

(0)
For Standard LCD 16x2 with Male Header. Press here For Standard LCD 16x2 with Female Header. Press here For Standard LCD 16x2 with I2C adapter board soldered. Press here. For Standard LCD 16x2 with White Background. Press here. For Standard LCD 16x2 with Blue Background. Press here.
BDT 255.00
BDT 255.00 tax incl.
BDT 255.00 tax excl.
BDT 255.00 tax excl.
BDT 255.00 tax incl.
BDT 255.00 tax incl.
BDT 0.00 Tax
BDT 255.00 tax excl.
BDT 255.00 tax excl.
BDT 0.00 Tax
BDT 255.00 tax incl.
More
In-Stock
In stock: 16
Creality CR-M4 3D Printer Robotics Bangladesh Quick view

Reference: RBD-2525

Brand: Creality Official

Creality CR-M4 3D Printer

(0)
Large format build volume (450x450x470mm) Quasi-industrial grade construction Dual Y-axis linear rails 25-point auto-leveling Flexible PC surface
BDT 204,035.00
BDT 204,035.00 tax incl.
BDT 204,035.00 tax excl.
BDT 204,035.00 tax excl.
BDT 204,035.00 tax incl.
BDT 204,035.00 tax incl.
BDT 0.00 Tax
BDT 204,035.00 tax excl.
BDT 204,035.00 tax excl.
BDT 0.00 Tax
BDT 204,035.00 tax incl.
More
Pre-Order (Delivery Time 1 month)
In stock: 0
16x2 Serial LCD Module Display for Arduino Assembled Robotics Bangladesh Quick view

Reference: RBD-1349

16x2 Serial LCD Module Display for Arduino Assembled

(0)
For Standard LCD 16x2. Press here.For Standard LCD 16x2 with Male Header. Press hereFor Standard LCD 16x2 with Female Header. Press hereFor Standard LCD 16x2 with I2C adapter board soldered. Press here.For Standard LCD 16x2 with White Background. Press here.For Standard LCD 16x2 with Blue Background. Press here. Model: LCD1602 Interface: I2C Interface...
BDT 340.00
BDT 340.00 tax incl.
BDT 340.00 tax excl.
BDT 340.00 tax excl.
BDT 340.00 tax incl.
BDT 340.00 tax incl.
BDT 0.00 Tax
BDT 340.00 tax excl.
BDT 340.00 tax excl.
BDT 0.00 Tax
BDT 340.00 tax incl.
More
In-Stock
In stock: 4
Roller Lever Endstop Limit Switch Module Robotics Bangladesh Quick view

Reference: RBD-2832

Roller Lever Endstop Limit Switch Module

(0)
Designed for use as an endstop for 3D printers but it can be used for other contact detection applications as well.
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In stock
In stock: 30
Raspberry Pi 7inch HDMI Touchscreen LCD with Case Robotics Bangladesh Quick view

Reference: RBD-1167

Brand: Waveshare

Raspberry Pi 7inch HDMI Touchscreen LCD with Case

(0)
Resolution:1024 x 600 Display Port: HDMI Touch Type: Capacitive Touch Points:5 points 7-inch IPS screen with a hardware resolution of 1024×600. 5-points capacitive touch control. Using Raspberry Pi, it supports Raspbian / Ubuntu / Kali / Retropie and WIN10 IoT, no need to install any drivers.
BDT 7,990.00
BDT 7,990.00 tax incl.
BDT 7,990.00 tax excl.
BDT 7,990.00 tax excl.
BDT 7,990.00 tax incl.
BDT 7,990.00 tax incl.
BDT 0.00 Tax
BDT 7,990.00 tax excl.
BDT 7,990.00 tax excl.
BDT 0.00 Tax
BDT 7,990.00 tax incl.
More
In-Stock
In stock: 13
Impact Switch Collision Switch Sensor Module Robotics Bangladesh Quick view

Reference: RBD-2833

Impact Switch Collision Switch Sensor Module

(0)
Type: Vibration Sensors Output: Switching Transducer Dimensions: 25 x 14 x 6 (LxWxH) mm Weight: 3 gm
BDT 90.00
BDT 90.00 tax incl.
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 90.00 tax incl.
BDT 90.00 tax incl.
BDT 0.00 Tax
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 0.00 Tax
BDT 90.00 tax incl.
More
In stock
In stock: 50
HDMI Interface 5 Inch 800x480 TFT Display Quick view

Reference: RBD-0947

Raspberry Pi HDMI Touch Display 5 Inch 800x480

(0)
5-inch LCD display. 800×480 screen resolution. 170º viewing angle. HDMI interface for displaying. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch. Raspberry Pi, Windows, Jetson Nano, BB Black, Banana Pi device & system support.
BDT 4,250.00
BDT 4,250.00 tax incl.
BDT 4,250.00 tax excl.
BDT 4,250.00 tax excl.
BDT 4,250.00 tax incl.
BDT 4,250.00 tax incl.
BDT 0.00 Tax
BDT 4,250.00 tax excl.
BDT 4,250.00 tax excl.
BDT 0.00 Tax
BDT 4,250.00 tax incl.
More
Last items in stock
In stock: 3
MAX7219 Dot Led Matrix LED Display Module Robotics Bangladesh Quick view

Reference: RBD-1417

MAX7219 Dot Led Matrix LED Display Module

(0)
SMD-MAX7219-MODULE A single module can drive an 8 * 8 common cathode lattice Module Operating voltage: 5V. Module with input and output interfaces Supports multiple modules cascade Led color: Red
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 30
OLED Display Module 0.91 Inch Robotics Bangladesh Quick view

Reference: RBD-1634

OLED Display Module 0.91 Inch

(0)
Size: 0.91 inch Resolution: 128 x 32 Controlling Chip: SSD1306 Display Area: 22.384 x 5.584mm Driving Voltage: 3-5V Operating Temperature: -40~70 celsius Interface Type: IIC Light Color: White
BDT 320.00
BDT 320.00 tax incl.
BDT 320.00 tax excl.
BDT 320.00 tax excl.
BDT 320.00 tax incl.
BDT 320.00 tax incl.
BDT 0.00 Tax
BDT 320.00 tax excl.
BDT 320.00 tax excl.
BDT 0.00 Tax
BDT 320.00 tax incl.
More
In-Stock
In stock: 7
LCD 16x2 Blue Backlight Robotics Bangladesh Quick view

Reference: RBD-1642

LCD 16x2 Blue Backlight

(0)
For Standard LCD 16x2 with Male Header. Press here For Standard LCD 16x2 with Female Header. Press here For Standard LCD 16x2 with I2C adapter board soldered. Press here. For Standard LCD 16x2 with White Background. Press here. For Standard LCD 16x2 with Blue Background. Press here.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In-Stock
In stock: 753
16x2 Black on White Character LCD with Backlight Robotics Bangladesh Quick view

Reference: RBD-1643

16x2 Black on White Character LCD with Backlight

(0)
For Standard LCD 16x2 with Male Header. Press here For Standard LCD 16x2 with Female Header. Press here For Standard LCD 16x2 with I2C adapter board soldered. Press here. For Standard LCD 16x2 with White Background. Press here. For Standard LCD 16x2 with Blue Background. Press here.
BDT 390.00
BDT 390.00 tax incl.
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 390.00 tax incl.
BDT 390.00 tax incl.
BDT 0.00 Tax
BDT 390.00 tax excl.
BDT 390.00 tax excl.
BDT 0.00 Tax
BDT 390.00 tax incl.
More
Last items in stock
In stock: 1
Back to top

Follow us on Facebook

Facebook