• Banner

Active filters
  • Categories: Display
  • Categories: Motor Driver
  • Categories: Orange Pi
  • Categories: Programmer
  • Categories: Robots

Reference: RBD-2416

WEMOS CH340G Breakout 5V 3.3V USB to Serial Module

(0)
5V (The max current depends on your USB port, usually 500mA) 3.3V (Using LDO, 300mA MAX) Use CH340G with stable performance. Driver: 1. CH340G USB to UART driver
BDT 330.00
BDT 330.00 tax incl.
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 330.00 tax incl.
BDT 330.00 tax incl.
BDT 0.00 Tax
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 0.00 Tax
BDT 330.00 tax incl.
More
In stock
In stock: 29

Reference: RBD-2308

DC 3V-36V 15A Dual H-Bridge DC Motor Driver

(0)
This Dual Dc motor driver focuses on high efficiency and can withstand high current load, the maximum current up to 30A. 
BDT 1,650.00
BDT 1,650.00 tax incl.
BDT 1,650.00 tax excl.
BDT 1,650.00 tax excl.
BDT 1,650.00 tax incl.
BDT 1,650.00 tax incl.
BDT 0.00 Tax
BDT 1,650.00 tax excl.
BDT 1,650.00 tax excl.
BDT 0.00 Tax
BDT 1,650.00 tax incl.
More
In stock
In stock: 16

Reference: RBD-1251

7 Inch TFT IPS Monitor for Raspberry Pi

(0)
Input Voltage: DC 7.4~35V. Input Current: DC 0.5A-1.5A. Power Consumption: ≤8W Watts. Resolution: 1024 x 600. Aspect Ratio: 16:9 & 4:3. Contrast Ratio: 500:1. Monitor Mount is not Available.
BDT 6,390.00
BDT 6,390.00 tax incl.
BDT 6,390.00 tax excl.
BDT 6,390.00 tax excl.
BDT 6,390.00 tax incl.
BDT 6,390.00 tax incl.
BDT 0.00 Tax
BDT 6,390.00 tax excl.
BDT 6,390.00 tax excl.
BDT 0.00 Tax
BDT 6,390.00 tax incl.
More
In-Stock
In stock: 10

Reference: RBD-2425

Shielded Blue USB Type-C Cable 30cm for Arduino

(0)
Now you can connect your Arduino boards, ESP or any other development platform with the Type-C USB Cable. Through a USB-C to USB-A connection, this data USB cable can easily connect your Arduino boards with your chosen programming device.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In stock
In stock: 87

Reference: RBD-2111

DC Motor Speed Controller PWM 12V

(0)
DC Motor Speed Controller PWM 12V Controls the speed of a DC motor using Pulse-Width-Modulation (PWM) Provides continuous current of 3A to the motor or DC load Includes a 3A fuse for protection Supports reverse connection of power supply
BDT 669.00
BDT 669.00 tax incl.
BDT 669.00 tax excl.
BDT 669.00 tax excl.
BDT 669.00 tax incl.
BDT 669.00 tax incl.
BDT 0.00 Tax
BDT 669.00 tax excl.
BDT 669.00 tax excl.
BDT 0.00 Tax
BDT 669.00 tax incl.
More
In-Stock
In stock: 49

Reference: RBD-1108

0.56 Inch 3 Digit 7 Segment Red Common Cathode Display

(0)
Bright Red LED chip, which is made from AlGaAs on GaAs substrate Blackface and RED LED segments Type: Common cathode No. of Pins: 12 Low Current Consumption High Brightness
BDT 50.00
BDT 50.00 tax incl.
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 50.00 tax incl.
BDT 50.00 tax incl.
BDT 0.00 Tax
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 0.00 Tax
BDT 50.00 tax incl.
More
In-Stock
In stock: 93

Reference: RBD-2427

USB Type-C Cable 1meter for Arduino

(0)
Now you can connect your Arduino boards, ESP or any other development platform with the Type-C USB Cable. Through a USB-C to USB-A connection, this data USB cable can easily connect your Arduino boards with your chosen programming device.
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In stock
In stock: 89

Reference: RBD-2067

7-70V 30A PWM DC Motor Speed Controller Switch with 30 Amp Fuse

(0)
7-70V 30A PWM DC Motor Speed Controller Switch Wide voltage input range: 7-70V Maximum output current: 30A Speed control knob with switch function Adjustable potentiometer with flexible cable (15cm length) Includes a 30A fuse for motor interface protection Input power must be 1.5 times greater than the motor's rated power
BDT 1,529.00
BDT 1,529.00 tax incl.
BDT 1,529.00 tax excl.
BDT 1,529.00 tax excl.
BDT 1,529.00 tax incl.
BDT 1,529.00 tax incl.
BDT 0.00 Tax
BDT 1,529.00 tax excl.
BDT 1,529.00 tax excl.
BDT 0.00 Tax
BDT 1,529.00 tax incl.
More
In-Stock
In stock: 10

Reference: RBD-0914

MAX7219 4 Channel Dot Matrix Display Panel

(0)
Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 320 mA Display Dimensions: 32x32x6 (LxWxH) mm PCB Dimensions: 128×32 (LxW) mm
BDT 650.00
BDT 650.00 tax incl.
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 650.00 tax incl.
BDT 650.00 tax incl.
BDT 0.00 Tax
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 0.00 Tax
BDT 650.00 tax incl.
More
In-Stock
In stock: 27

Reference: RBD-2463

Programmer Testing IC Test Clip Black SOIC8/SOP8 Flash Chip IC Test Clamp

(0)
The SOP8 test clip is made of high-quality plastic and copper metal, which is durable and can be reused.When using the SOP8 test clamp, do not force it down, open the clamp and clamp it in from the left and right sides of the chip.The same is true when disassembling, you can't pull it out directly, you must first separate the clip from left to right, and...
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In stock
In stock: 47

Reference: RBD-2369

LSC-6: Hiwonder 6 CH Bluetooth 4.0 Servo Controller Module for Robotics Arm

(0)
Built-in power switch High-performance CPU 16M high-capacity memory Built in Bluetooth 4.0 module Support TTL serial communication
BDT 5,980.00
BDT 5,980.00 tax incl.
BDT 5,980.00 tax excl.
BDT 5,980.00 tax excl.
BDT 5,980.00 tax incl.
BDT 5,980.00 tax incl.
BDT 0.00 Tax
BDT 5,980.00 tax excl.
BDT 5,980.00 tax excl.
BDT 0.00 Tax
BDT 5,980.00 tax incl.
More
In stock
In stock: 10

Reference: RBD-1305

0.56 Inch 1 Digit 7 Segment Red Common Cathode Display

(0)
Bright Red LED chip, which is made from AlGaAs on GaAs substrate Blackface and RED LED segments Type: Common anode No. of Pins: 10 Low Current Consumption High Brightness
BDT 17.00 BDT 20.00
BDT 20.00 BDT 17.00 tax incl.
BDT 20.00 BDT 17.00 tax excl.
BDT 20.00 BDT 17.00 tax excl.
BDT 20.00 BDT 17.00 tax incl.
BDT 20.00 BDT 17.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 20.00 BDT 17.00 tax excl.
BDT 20.00 BDT 17.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 20.00 BDT 17.00 tax incl.
More
In-Stock
In stock: 99

Reference: RBD-2655

ST-LINK/V2 CN In-Circuit Debugger/Programmer for STM8 and STM32

(0)
5V power supplied by a USB connector USB 2.0 full speed compatible interface USB standard A to mini B cable 1.65V to 5.5V application voltage supported on SWIM interface SWIM low speed and high-speed modes supported Made in China To upgrade the programmer using STM32CubeProgrammer you need to enable the "Shared" options. This product is a clone and might...
BDT 1,750.00
BDT 1,750.00 tax incl.
BDT 1,750.00 tax excl.
BDT 1,750.00 tax excl.
BDT 1,750.00 tax incl.
BDT 1,750.00 tax incl.
BDT 0.00 Tax
BDT 1,750.00 tax excl.
BDT 1,750.00 tax excl.
BDT 0.00 Tax
BDT 1,750.00 tax incl.
More
In stock
In stock: 9

Reference: RBD-2389

L298N Dual H-Bridge Motor Driver Module

(0)
This module is ideally suited to motor control to your project. This is the L298N Dual H-Bridge module which allows you to build in 2 controlled motors to your projects, controlling the speed with current. This can be used with a wide range of microcontrollers including Arduino and Raspberry Pi.
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In stock
In stock: 8

Reference: RBD-1306

8*8 LED matrix module common anode of LED matrix

(0)
Easy to Install on Breadboard. Bright LED lights. Compact Design. LED Size: 3mm. Configuration: Common Anode.
BDT 95.00
BDT 95.00 tax incl.
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 95.00 tax incl.
BDT 95.00 tax incl.
BDT 0.00 Tax
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 0.00 Tax
BDT 95.00 tax incl.
More
In-Stock
In stock: 78

Reference: RBD-2714

ST-LINK V2.1 Emulator Debugger Programmer for STM32

(0)
The ST-LINK V2.1 emulator offers comprehensive support for all STM32 models, providing versatile functionality for development and debugging tasks. This product is a clone and might not support STM32Cube.
BDT 1,690.00
BDT 1,690.00 tax incl.
BDT 1,690.00 tax excl.
BDT 1,690.00 tax excl.
BDT 1,690.00 tax incl.
BDT 1,690.00 tax incl.
BDT 0.00 Tax
BDT 1,690.00 tax excl.
BDT 1,690.00 tax excl.
BDT 0.00 Tax
BDT 1,690.00 tax incl.
More
In stock
In stock: 5

Reference: RBD-2390

L298N PCB Driver Module Quad High-Power 4-Channel Smart Auto Motor Driving Board

(0)
Forward and reverse rotating :Forward and reverse rotating motor can be realized, can meet the needs of various working scenarios. Good production performance :Excellent production technology, not easy to cold joint, reliable and safe for you to use. Multiple good ability :With characteristics of strong driving ability, low heat dissipation and strong...
BDT 1,200.00
BDT 1,200.00 tax incl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax incl.
BDT 1,200.00 tax incl.
BDT 0.00 Tax
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 0.00 Tax
BDT 1,200.00 tax incl.
More
In stock
In stock: 9

Reference: RBD-1328

0.96" Inch I2C OLED Display White

(0)
Size: 0.96 inch Resolution: 128 x 64 Controlling Chip: SSH1106 Display Area: 21.74 x 10.86mm Driving Voltage: 3.3-5V Operating Temperature: -40~70 celsius Interface Type: IIC Light Color: White
BDT 395.00
BDT 395.00 tax incl.
BDT 395.00 tax excl.
BDT 395.00 tax excl.
BDT 395.00 tax incl.
BDT 395.00 tax incl.
BDT 0.00 Tax
BDT 395.00 tax excl.
BDT 395.00 tax excl.
BDT 0.00 Tax
BDT 395.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2746

QL2006 USB & RS232 PIC ICSP Programmer Emulator for Microchip MCU Programming

(0)
QL-2006 programmer is the high-speed programmer designed specially for development and production programming of PIC single chip microcomputer (SCM) by QLS Electronic Technology Co., Ltd. The product is featured with small volume, low power consumption, high reliability as well as easy and convenient operation.QL-2006 is applicable for almost all...
BDT 13,900.00
BDT 13,900.00 tax incl.
BDT 13,900.00 tax excl.
BDT 13,900.00 tax excl.
BDT 13,900.00 tax incl.
BDT 13,900.00 tax incl.
BDT 0.00 Tax
BDT 13,900.00 tax excl.
BDT 13,900.00 tax excl.
BDT 0.00 Tax
BDT 13,900.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-2419

TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis

(0)
Input Current: 0~5A Output Current: 0.5~4.0A Control Signal: 3.3~24V Power (MAX): 160W Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32 Temperature: -10~45℃ H bridge bipolar constant current drive.
BDT 990.00
BDT 990.00 tax incl.
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 990.00 tax incl.
BDT 990.00 tax incl.
BDT 0.00 Tax
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 0.00 Tax
BDT 990.00 tax incl.
More
In stock
In stock: 17

Reference: RBD-1332

I2C Graphic 128x64 LCD Adapter

(0)
Adapter: Graphic 128x64 Communication: i2c 
BDT 499.00
BDT 499.00 tax incl.
BDT 499.00 tax excl.
BDT 499.00 tax excl.
BDT 499.00 tax incl.
BDT 499.00 tax incl.
BDT 0.00 Tax
BDT 499.00 tax excl.
BDT 499.00 tax excl.
BDT 0.00 Tax
BDT 499.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-2511

N-channel power MOSFET - 30V / 60A IRLB8721

(0)
Switching a lot of power? N-channel power MOSFET - 30V / 60A  IRLB8721 MOSFETs are just what you need.These TO-220 package power MOSFETs can switch 30V/60A, which is plenty for most makers! They fit straight into a breadboard or even your own PCB with 2.54mm spaced pads.
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In stock
In stock: 24

Reference: RBD-1335

LCD Graphic 128x64 Display ST7920 12864B

(0)
Based on ST7920 Resolution: 128 X 64 pixels Operating voltage: 5V Viewing Area: 72mm x 40mm Display mode TN/STN
BDT 995.00
BDT 995.00 tax incl.
BDT 995.00 tax excl.
BDT 995.00 tax excl.
BDT 995.00 tax incl.
BDT 995.00 tax incl.
BDT 0.00 Tax
BDT 995.00 tax excl.
BDT 995.00 tax excl.
BDT 0.00 Tax
BDT 995.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-2676

PWM Signal Generator Stepper Motor Speed Controller Driver Board

(0)
Suitable for use with a wide range of stepper motors and drivers. Can be integrated into a simple control platform with a stepper motor and DC power supply. Offers three selectable low-frequency signal options: high (5.4k-160kHz), middle (540-16.6kHz), and low (80-2.4kHz), adjustable via jumper settings. Capable of producing both pulse and PWM signals,...
BDT 550.00
BDT 550.00 tax incl.
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 550.00 tax incl.
BDT 550.00 tax incl.
BDT 0.00 Tax
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 0.00 Tax
BDT 550.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-1342

LCD Display 16x2 with Female Header

(0)
For Standard LCD 16x2 with Male Header. Press here For Standard LCD 16x2 with Female Header. Press here For Standard LCD 16x2 with I2C adapter board soldered. Press here. For Standard LCD 16x2 with White Background. Press here. For Standard LCD 16x2 with Blue Background. Press here.
BDT 255.00
BDT 255.00 tax incl.
BDT 255.00 tax excl.
BDT 255.00 tax excl.
BDT 255.00 tax incl.
BDT 255.00 tax incl.
BDT 0.00 Tax
BDT 255.00 tax excl.
BDT 255.00 tax excl.
BDT 0.00 Tax
BDT 255.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-2682

Dual DC Motor Drive Module Industrial Grade PWM Speed Control 7A/160W

(0)
Double H bridge, which can drive two DC motors at the same time, single 7A current, high power; Wide voltage input 6.5V ~ 27V ; Signal optocoupler isolated input, can be directly controlled by IO port, free from interference; Undervoltage protection to prevent instantaneous high current burning of the module; High-power TVS and electrostatic bleeder...
BDT 990.00
BDT 990.00 tax incl.
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 990.00 tax incl.
BDT 990.00 tax incl.
BDT 0.00 Tax
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 0.00 Tax
BDT 990.00 tax incl.
More
In stock
In stock: 10

Reference: RBD-1349

16x2 Serial LCD Module Display for Arduino Assembled

(0)
For Standard LCD 16x2. Press here.For Standard LCD 16x2 with Male Header. Press hereFor Standard LCD 16x2 with Female Header. Press hereFor Standard LCD 16x2 with I2C adapter board soldered. Press here.For Standard LCD 16x2 with White Background. Press here.For Standard LCD 16x2 with Blue Background. Press here. Model: LCD1602 Interface: I2C Interface...
BDT 340.00
BDT 340.00 tax incl.
BDT 340.00 tax excl.
BDT 340.00 tax excl.
BDT 340.00 tax incl.
BDT 340.00 tax incl.
BDT 0.00 Tax
BDT 340.00 tax excl.
BDT 340.00 tax excl.
BDT 0.00 Tax
BDT 340.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-2754

L298N 4WD Motor Driver DC Motor Driver Compatible With 3.3V Support Arduino STM32

(0)
The L298N 4WD Motor Driver is a versatile and robust H-bridge driver module designed for controlling DC motors with ease and precision. With its compatibility with 3.3V microcontrollers and support for popular platforms like Arduino and STM32, this module offers flexibility and convenience in motor control applications.
BDT 795.00
BDT 795.00 tax incl.
BDT 795.00 tax excl.
BDT 795.00 tax excl.
BDT 795.00 tax incl.
BDT 795.00 tax incl.
BDT 0.00 Tax
BDT 795.00 tax excl.
BDT 795.00 tax excl.
BDT 0.00 Tax
BDT 795.00 tax incl.
More
In stock
In stock: 19

Reference: RBD-1167

Brand: Waveshare

Raspberry Pi 7inch HDMI Touchscreen LCD with Case

(0)
Resolution:1024 x 600 Display Port: HDMI Touch Type: Capacitive Touch Points:5 points 7-inch IPS screen with a hardware resolution of 1024×600. 5-points capacitive touch control. Using Raspberry Pi, it supports Raspbian / Ubuntu / Kali / Retropie and WIN10 IoT, no need to install any drivers.
BDT 7,990.00
BDT 7,990.00 tax incl.
BDT 7,990.00 tax excl.
BDT 7,990.00 tax excl.
BDT 7,990.00 tax incl.
BDT 7,990.00 tax incl.
BDT 0.00 Tax
BDT 7,990.00 tax excl.
BDT 7,990.00 tax excl.
BDT 0.00 Tax
BDT 7,990.00 tax incl.
More
In-Stock
In stock: 13

Reference: RBD-2834

A4988 / DRV8825 Stepper Motor Driver Expansion Board

(0)
Enhance your 3D printer's performance with the DRV8825/A4988 Stable 42 Stepper Motor Driver Expansion Board. This expansion board offers advanced features and superior performance to meet your diverse needs in 3D printing and DIY projects.Note: Please ensure correct installation direction of the drive module to prevent module damage.
BDT 155.00
BDT 155.00 tax incl.
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 155.00 tax incl.
BDT 155.00 tax incl.
BDT 0.00 Tax
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 0.00 Tax
BDT 155.00 tax incl.
More
In stock
In stock: 45

Reference: RBD-0947

Raspberry Pi HDMI Touch Display 5 Inch 800x480

(0)
5-inch LCD display. 800×480 screen resolution. 170º viewing angle. HDMI interface for displaying. Supports popular game consoles like Microsoft XBOX360, Sony PS4, and Nintendo Switch. Raspberry Pi, Windows, Jetson Nano, BB Black, Banana Pi device & system support.
BDT 4,250.00
BDT 4,250.00 tax incl.
BDT 4,250.00 tax excl.
BDT 4,250.00 tax excl.
BDT 4,250.00 tax incl.
BDT 4,250.00 tax incl.
BDT 0.00 Tax
BDT 4,250.00 tax excl.
BDT 4,250.00 tax excl.
BDT 0.00 Tax
BDT 4,250.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-1417

MAX7219 Dot Led Matrix LED Display Module

(0)
SMD-MAX7219-MODULE A single module can drive an 8 * 8 common cathode lattice Module Operating voltage: 5V. Module with input and output interfaces Supports multiple modules cascade Led color: Red
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 30

Follow us on Facebook