The Analog Piezoelectric Ceramic Vibration Module is a small, versatile tool that can be used to measure the extent of vibration. The module is based on the piezoelectric effect, which means that it generates an electrical signal when it is subjected to mechanical pressure. The output voltage of the module is proportional to the strength of the vibration, so it can be used to measure the intensity of shaking or impact. Featured By RoboticsBD.
Product Images are shown for illustrative purposes only and may differ from the actual product.
To use a piezoelectric sensor is easy, just connect the positive and negative terminal to your module and press the top of sensor. By pressing, due to mechanical pressure it creates voltage at output which is further feed to the circuit. Connect the piezoelectric sensor, as shown in the video below.
Do not expose the module to high voltage or current.
Do not expose the module to extreme temperatures.
Do not use the module in a wet or humid environment.
The Analog Piezoelectric Ceramic Vibration Module is a great tool for a variety of applications.
The module is easy to use and can be connected to a variety of devices.
The GY-362 ADXL362 Sensor Module is a high-precision accelerometer module designed for a wide range of motion sensing applications. Powered by Analog Devices' ADXL362, this module offers ultra-low power consumption, exceptional accuracy, and versatile functionality.
Sharp GP2Y0A02YK0F IR Range Sensor - 20 cm to 150 cm
Infrared range finder 20cm (~8") to 150cm (~60")
Distance measuring range: 20 cm to 150 cm (8″ to 60″)
Output type: Analog voltage
Output voltage differential over distance range: 2.05 V (typical)
Update period: 38 ± 10 ms
Wide voltage operation: 3.3~5.5V
0~2.3V analog signal output, compatible with 5V, 3.3V two control systems
The excitation source is an AC signal, effectively preventing probe polarization
Waterproof probe for long-term immersion in water
Crystal: the oscillation frequency of 455.
Button: free height is less than 3mm, the force 200-350g, the life of more than 200 000.
Photo-detector and preamplifier in one package.
Internal filter for PCM frequency. RoboticsBD
Improved shielding against EMI.
Don’t forget to add CR2025 Battery to your Cart as this remote does not come with a battery
Surface transducers give you the awesome power to turn almost any surface into a speaker. They're essentially just a speaker except instead of a cone, the coil is attached to a pad that conducts the vibration into whatever you press it against. Hook it up to an audio source and press it against the nearest table, wall or cardboard box. You can even put it...
5Hz position update rate.
The cold start time of 38 s and Hot start time of 1 s.
Configurable from 4800 Baud to 115200 Baud rates. (default 9600).
SuperSense ® Indoor GPS: -162 dBm tracking sensitivity.
Support SBAS (WAAS, EGNOS, MSAS, GAGAN).
Separated 18 x 18mm GPS antenna. RoboticsBD
In recent years 2022, due to a shortage of chips, some of the GPS...
Sharp GP2Y1010AU0F onboard,
Detecting fine particle larger than 0.8μm
Low power consumption
Analog voltage output
The output level is linear with dust density
Check out New Product
Optical Dust Sensor- GP2Y1010AU0F
Dimensions: 40 x 27 x 15 (LxWxH) mm. RoboticsBD
Weight: 10gm (without Hat).
2.54mm pin interface leads.
Operating Voltage: 5V.
Long service life and stable performance.
Standard interface and electronic building blocks.
Widely use in Arduino DIY projects. RoboticsBD
Using high-quality dual-panel design, with power indicator and TTL signal output instructions.
The switching signal having a DO (TTL) output and analog output AO.
TTL output valid signal is low.
The higher the voltage, the concentration of the analog output voltage is higher.
A hydrogen gas detection with good sensitivity.
Has a long life and reliable...
Working Voltage: 5.0V
Maximum Working Current: 100mA
Data Interface Level: L＜0.8V, H>2.7V, maximum voltage level 3.3V
Particle Measurement Range: 0.3 ~ 1.0μm; 1.0 ~ 2.5μm; 2.5 ~ 10μm
Note: Please purchase this adapter board to use it with Arduino and Raspberry Pi.
Add computer vision capabilities to your project, without the coding! The Person Sensor includes a camera module pre-programed and connected over Qwiic...
Person Sensor V1.1 by Useful Sensors
Output Channel: 1
Power Supply: 3.3/5V
Built in a potentiometer for sensitivity control.
Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO.
Detection angle about 60 degrees, the flame spectrum especially sensitive.
The flame of the most...
The Arduino Uno R3 High-Quality Edition
Arduino UNO in Bangladesh
Micro-controller : ATmega328.
Operating Voltage : 5V.
Input Voltage (recommended) : 7-12V.
Digital I/O Pins : 14 (of which 6 provide PWM output).
Analog Input Pins : 6.
The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...
Using SW-420 normally closed type vibration sensor
Comparator output, clean signal, good waveform, strong driving ability, >15mA
Operating voltage 3.3V ~ 5V
Output format: digital switching output (0 and 1)
Using a wide voltage LM393 comparator
With bolt holes for easy installation
Has a signal output instruction
When the output valid signal is high, the light goes out
The sensitivity is adjustable (fine-tuning)
The wide detection range of vibration, no direction
With mounting holes, firmware installation is flexible and convenient. RoboticsBD
Onboard precision microcurrent transformer.
Onboard sampling resistor.
The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA.
Rated input current: 5A
Rated output current: 5mA
Change: 1000: 1
The linear range: 0 ~ 10A (100 ohms)
Linearity: 0.2%
Highly sensitive and reliable Piezoelectric Vibration Sensor Module
Detects vibration and measures acceleration
Analog and digital outputs
Suitable for industrial control systems, robotics, automotive, and consumer electronics
