Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 3.00 - BDT 86,245.00

Categories

Categories

Jumper Wire Type

Jumper Wire Type

Brand

Brand

Weight

Weight

  • 0 kg - 17,170 kg

  • Banner

Active filters
  • Availability: In stock
  • Categories: 3D Printer
  • Categories: PLC Cable
  • Categories: Programmer
  • Categories: RFID/ NFC
  • Categories: Robotics Parts

Reference: RBD-2416

WEMOS CH340G Breakout 5V 3.3V USB to Serial Module

(0)
5V (The max current depends on your USB port, usually 500mA) 3.3V (Using LDO, 300mA MAX) Use CH340G with stable performance. Driver: 1. CH340G USB to UART driver
BDT 330.00
BDT 330.00 tax incl.
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 330.00 tax incl.
BDT 330.00 tax incl.
BDT 0.00 Tax
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 0.00 Tax
BDT 330.00 tax incl.
More
In stock
In stock: 29

Reference: RBD-1678

Big Easy Driver - Stepper Motor Driver

(0)
2A phase 3D Printer Big Easy Driver board V1.2 A4988 stepper motor driver board Module
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-0103

M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module

(0)
This is M177 NRF24L01 2.4GHz Antenna Wireless Transceiver Module. The nRF24L01 is a highly integrated, ultra-low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM (Industrial, Scientific, and Medical) band. With peak RX/TX currents lower than 14mA, a sub μA power down mode, advanced power management, and a 1.9 to 3.6V supply range, the nRF24L01...
BDT 199.00
BDT 199.00 tax incl.
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 199.00 tax incl.
BDT 199.00 tax incl.
BDT 0.00 Tax
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 0.00 Tax
BDT 199.00 tax incl.
More
In-Stock
In stock: 102

Reference: RBD-2425

Shielded Blue USB Type-C Cable 30cm for Arduino

(0)
Now you can connect your Arduino boards, ESP or any other development platform with the Type-C USB Cable. Through a USB-C to USB-A connection, this data USB cable can easily connect your Arduino boards with your chosen programming device.
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In stock
In stock: 87

Reference: RBD-0104

6DOF Accelerometer Gyroscope GY-521 MPU-6050

(0)
Chip built-in 16bit AD converter, 16-bit data output Driver Chip: MPU6050 Operating Voltage: 3-5V DC Communication: I2C/IIC Protocol Gyro Range: ± 250, 500, 1000, 2000 °/s Accelerometer Range: ± 2 ± 4 ± 8 ± 16 g
BDT 208.00
BDT 208.00 tax incl.
BDT 208.00 tax excl.
BDT 208.00 tax excl.
BDT 208.00 tax incl.
BDT 208.00 tax incl.
BDT 0.00 Tax
BDT 208.00 tax excl.
BDT 208.00 tax excl.
BDT 0.00 Tax
BDT 208.00 tax incl.
More
In-Stock
In stock: 392

Reference: RBD-2427

USB Type-C Cable 1meter for Arduino

(0)
Now you can connect your Arduino boards, ESP or any other development platform with the Type-C USB Cable. Through a USB-C to USB-A connection, this data USB cable can easily connect your Arduino boards with your chosen programming device.
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In stock
In stock: 89

Reference: RBD-0108

USB Host Shield For Arduino UNO, MEGA, Compatible with Google Android ADK

(0)
Works with standard (dual 5/3.3V) and 3.3V-only (for example, Pro Arduino) boards. Complies with USB Specification Revision 2.0 (Full-Speed 12Mbps Peripheral, Full-/Low-Speed 12Mbps/1.5Mbps Host) Supports HID devices, such as keyboards, mice, joysticks, etc. Compatible with Mass storage devices, such as USB sticks, memory card readers, external hard...
BDT 1,199.00
BDT 1,199.00 tax incl.
BDT 1,199.00 tax excl.
BDT 1,199.00 tax excl.
BDT 1,199.00 tax incl.
BDT 1,199.00 tax incl.
BDT 0.00 Tax
BDT 1,199.00 tax excl.
BDT 1,199.00 tax excl.
BDT 0.00 Tax
BDT 1,199.00 tax incl.
More
In-Stock
In stock: 12

Reference: RBD-2463

Programmer Testing IC Test Clip Black SOIC8/SOP8 Flash Chip IC Test Clamp

(0)
The SOP8 test clip is made of high-quality plastic and copper metal, which is durable and can be reused.When using the SOP8 test clamp, do not force it down, open the clamp and clamp it in from the left and right sides of the chip.The same is true when disassembling, you can't pull it out directly, you must first separate the clip from left to right, and...
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In stock
In stock: 47

Reference: RBD-0280

Mini Breadboard

(0)
Tie-points: 170 (10×17) Size: 48 x 35 x 10 mm(LxWxH). Use: experimental, testing, robot Matching jumper, diameter 0.8mm Phosphor bronze nickel plated spring clips Accepts a variety of wire sizes (29-20 the AWG) **1 pcs Random Color
BDT 45.00
BDT 45.00 tax incl.
BDT 45.00 tax excl.
BDT 45.00 tax excl.
BDT 45.00 tax incl.
BDT 45.00 tax incl.
BDT 0.00 Tax
BDT 45.00 tax excl.
BDT 45.00 tax excl.
BDT 0.00 Tax
BDT 45.00 tax incl.
More
In-Stock
In stock: 633

Reference: RBD-2655

ST-LINK/V2 CN In-Circuit Debugger/Programmer for STM8 and STM32

(0)
5V power supplied by a USB connector USB 2.0 full speed compatible interface USB standard A to mini B cable 1.65V to 5.5V application voltage supported on SWIM interface SWIM low speed and high-speed modes supported Made in China To upgrade the programmer using STM32CubeProgrammer you need to enable the "Shared" options. This product is a clone and might...
BDT 1,750.00
BDT 1,750.00 tax incl.
BDT 1,750.00 tax excl.
BDT 1,750.00 tax excl.
BDT 1,750.00 tax incl.
BDT 1,750.00 tax incl.
BDT 0.00 Tax
BDT 1,750.00 tax excl.
BDT 1,750.00 tax excl.
BDT 0.00 Tax
BDT 1,750.00 tax incl.
More
In stock
In stock: 9

Reference: RBD-0120

Breadboard (Medium Size)

(0)
400 tie points 2 Power lanes, Total 100 tie points in power lanes 1 Double strip, Total 300 tie points Perfect for Arduino shield prototyping and testing Plastic housing, metal contact clips
BDT 88.00
BDT 88.00 tax incl.
BDT 88.00 tax excl.
BDT 88.00 tax excl.
BDT 88.00 tax incl.
BDT 88.00 tax incl.
BDT 0.00 Tax
BDT 88.00 tax excl.
BDT 88.00 tax excl.
BDT 0.00 Tax
BDT 88.00 tax incl.
More
In-Stock
In stock: 158

Reference: RBD-2714

ST-LINK V2.1 Emulator Debugger Programmer for STM32

(0)
The ST-LINK V2.1 emulator offers comprehensive support for all STM32 models, providing versatile functionality for development and debugging tasks. This product is a clone and might not support STM32Cube.
BDT 1,690.00
BDT 1,690.00 tax incl.
BDT 1,690.00 tax excl.
BDT 1,690.00 tax excl.
BDT 1,690.00 tax incl.
BDT 1,690.00 tax incl.
BDT 0.00 Tax
BDT 1,690.00 tax excl.
BDT 1,690.00 tax excl.
BDT 0.00 Tax
BDT 1,690.00 tax incl.
More
In stock
In stock: 5

Reference: RBD-2746

QL2006 USB & RS232 PIC ICSP Programmer Emulator for Microchip MCU Programming

(0)
QL-2006 programmer is the high-speed programmer designed specially for development and production programming of PIC single chip microcomputer (SCM) by QLS Electronic Technology Co., Ltd. The product is featured with small volume, low power consumption, high reliability as well as easy and convenient operation.QL-2006 is applicable for almost all...
BDT 13,900.00
BDT 13,900.00 tax incl.
BDT 13,900.00 tax excl.
BDT 13,900.00 tax excl.
BDT 13,900.00 tax incl.
BDT 13,900.00 tax incl.
BDT 0.00 Tax
BDT 13,900.00 tax excl.
BDT 13,900.00 tax excl.
BDT 0.00 Tax
BDT 13,900.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-2107

PLA+ Filament 1.75mm Plastic For 3D Printer 1kg/Roll

(0)
Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved
BDT 3,050.00
BDT 3,050.00 tax incl.
BDT 3,050.00 tax excl.
BDT 3,050.00 tax excl.
BDT 3,050.00 tax incl.
BDT 3,050.00 tax incl.
BDT 0.00 Tax
BDT 3,050.00 tax excl.
BDT 3,050.00 tax excl.
BDT 0.00 Tax
BDT 3,050.00 tax incl.
More
In-Stock
In stock: 13

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-0145

YL-69 Soil Hygrometer Humidity & Soil Moisture Detection Sensor

(0)
Dual output mode, analog output more accurate A fixed bolt hole for easy installation With power indicator (red) and digital switching output indicator (green) Having LM393 comparator chip, stable. Operating Voltage: 3.3V~5V
BDT 120.00
BDT 120.00 tax incl.
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 120.00 tax incl.
BDT 120.00 tax incl.
BDT 0.00 Tax
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 0.00 Tax
BDT 120.00 tax incl.
More
In-Stock
In stock: 280

Reference: RBD-2832

Roller Lever Endstop Limit Switch Module

(0)
Designed for use as an endstop for 3D printers but it can be used for other contact detection applications as well.
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In stock
In stock: 30

Reference: RBD-0150

5mW Adjustable Laser Dot Diode Module

(0)
Output Power: 5mW Working Voltage: 3-3.3V DC Working temperature: -10 ℃~+40 ℃ Housing material: Copper Working life: more than 2000 hours Spot mode: Dot Facula (continuous output) Laser wavelength: 650nm red-colored. Operating current: <40mA Power lead length: 120mm. 5V could damage the laser
BDT 26.00
BDT 26.00 tax incl.
BDT 26.00 tax excl.
BDT 26.00 tax excl.
BDT 26.00 tax incl.
BDT 26.00 tax incl.
BDT 0.00 Tax
BDT 26.00 tax excl.
BDT 26.00 tax excl.
BDT 0.00 Tax
BDT 26.00 tax incl.
More
In-Stock
In stock: 164

Reference: RBD-2833

Impact Switch Collision Switch Sensor Module

(0)
Type: Vibration Sensors Output: Switching Transducer Dimensions: 25 x 14 x 6 (LxWxH) mm Weight: 3 gm
BDT 90.00
BDT 90.00 tax incl.
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 90.00 tax incl.
BDT 90.00 tax incl.
BDT 0.00 Tax
BDT 90.00 tax excl.
BDT 90.00 tax excl.
BDT 0.00 Tax
BDT 90.00 tax incl.
More
In stock
In stock: 50

Reference: RBD-0159

LCD Keypad Shield for Arduino

(0)
Provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 6 keys select, up, right, down, left and reset. To save the digital IO pins, the keypad interface only uses one ADC channel. The key value is read out through a 5 stage voltage...
BDT 550.00
BDT 550.00 tax incl.
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 550.00 tax incl.
BDT 550.00 tax incl.
BDT 0.00 Tax
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 0.00 Tax
BDT 550.00 tax incl.
More
In-Stock
In stock: 33

Reference: RBD-0161

20x4 Character LCD

(0)
Model: LCD2004 Character Color: White Backlight: Blue Supply voltage: 5V Dimensions(L x W x H) mm: 98 x 60 x 12
BDT 343.00
BDT 343.00 tax incl.
BDT 343.00 tax excl.
BDT 343.00 tax excl.
BDT 343.00 tax incl.
BDT 343.00 tax incl.
BDT 0.00 Tax
BDT 343.00 tax excl.
BDT 343.00 tax excl.
BDT 0.00 Tax
BDT 343.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-0169

Flex Sensor 2.2"

(0)
Flex length: 5.6 cm. Total Length: 2.2″ (7 cm). Life Cycle : >1 million. Height : 0.43mm (0.017″), Flat Resistance: 10K Ohms ±30%. Power Rating: 0.5 Watts.
BDT 1,250.00
BDT 1,250.00 tax incl.
BDT 1,250.00 tax excl.
BDT 1,250.00 tax excl.
BDT 1,250.00 tax incl.
BDT 1,250.00 tax incl.
BDT 0.00 Tax
BDT 1,250.00 tax excl.
BDT 1,250.00 tax excl.
BDT 0.00 Tax
BDT 1,250.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-0176

Brand: SparkFun Electronics

Rover 5 Robot Platform 4 Motors 4 Encoders

(0)
Arduino Compatible Easy to assemble Adjustable gear box angles 4 independent DC motors 4 independent hall-effect encoders Thick rubber tank treads 10Kg/cm stall torque per motor
BDT 5,999.00
BDT 5,999.00 tax incl.
BDT 5,999.00 tax excl.
BDT 5,999.00 tax excl.
BDT 5,999.00 tax incl.
BDT 5,999.00 tax incl.
BDT 0.00 Tax
BDT 5,999.00 tax excl.
BDT 5,999.00 tax excl.
BDT 0.00 Tax
BDT 5,999.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-0180

Brand: SparkFun Electronics

Makey Makey Kit

(0)
Description: This is the same product as the Makey Makey Standard Kit. The difference is this version comes in fancy clamshell packaging meant for our distributors that need it. Regular customers are welcome to order, but we want to limit the amount of extra packaging finding its way into the trash heap.
BDT 5,500.00
BDT 5,500.00 tax incl.
BDT 5,500.00 tax excl.
BDT 5,500.00 tax excl.
BDT 5,500.00 tax incl.
BDT 5,500.00 tax incl.
BDT 0.00 Tax
BDT 5,500.00 tax excl.
BDT 5,500.00 tax excl.
BDT 0.00 Tax
BDT 5,500.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0117

Line Following Robot Kit 2021

(0)
Package Name: Line Following Kit Year: 2021 Arduino Uno  L298n motor shield Line Following Sensor 5 Array Breadboard medium Tp4056 with 1 cell holder (Charger)
BDT 2,899.00
BDT 2,899.00 tax incl.
BDT 2,899.00 tax excl.
BDT 2,899.00 tax excl.
BDT 2,899.00 tax incl.
BDT 2,899.00 tax incl.
BDT 0.00 Tax
BDT 2,899.00 tax excl.
BDT 2,899.00 tax excl.
BDT 0.00 Tax
BDT 2,899.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-0189

Brand: DFRobot

Xbee Shield for Arduino (without Xbee)

(0)
Xbee Shield for Arduino (without Xbee) INTRODUCTION: The XBee Expansion Board is a compliant solution designed to meet low-cost, low-power wireless sensor networks with special needs.The module is easy to use, low power consumption, and the provision of critical data between devices reliable transmission.
BDT 1,200.00
BDT 1,200.00 tax incl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax incl.
BDT 1,200.00 tax incl.
BDT 0.00 Tax
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 0.00 Tax
BDT 1,200.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-0032

Arduino Nano

(0)
USB Driver: CH340 Operating Voltage (logic level): 5V With Mini USB 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please select...
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In-Stock
In stock: 549

Reference: RBD-0195

Brand: RoboticsBD

25mW Infrared Line Laser Light

(0)
25mW Infrared Line Laser Light
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
In-stock
In stock: 22

Reference: RBD-0217

Servo Motor Micro MG90S 180 Degree Rotation

(0)
Model: MG90S Weight: 13 gm Operating voltage: 4.8V~ 6.6V Servo Plug: JR Stall torque @4.8V : 1.8kg-cm Stall torque @6.6V : 2.2kg-cm Note: The component, colour & shape of the motor may vary depending on our stock rotation.
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 330

Reference: RBD-0226

Brand: SparkFun Electronics

Camera Module - pcDuino V3 (2MP)

(0)
Camera Module - pcDuino V3 (2MP)
BDT 2,000.00
BDT 2,000.00 tax incl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 2,000.00 tax incl.
BDT 2,000.00 tax incl.
BDT 0.00 Tax
BDT 2,000.00 tax excl.
BDT 2,000.00 tax excl.
BDT 0.00 Tax
BDT 2,000.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0234

Brand: SparkFun Electronics

LCD Cape - pcDuino V3 (1024x600 7" LVDS)

(0)
Description: This is a 7" LVDS LCD Cape for the pcDuino V3  with a 1024x600 screen resolution and capacitive touch from  LinkSprite. This massive screen is a great addition for the  pcDuino V3 that compliments its extreme versatility as a mini  PC development platform. 
BDT 7,500.00
BDT 7,500.00 tax incl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 7,500.00 tax incl.
BDT 7,500.00 tax incl.
BDT 0.00 Tax
BDT 7,500.00 tax excl.
BDT 7,500.00 tax excl.
BDT 0.00 Tax
BDT 7,500.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0227

JF-0530B Pull Push Type Electric Solenoid Electromagnet 10mm 5N DC6V

(0)
Model: DC 5V 10mm 5N Rated Operating Voltage (VDC): 5 Operation Mode: Push-Pull (Normally Closed) Holding Force (N): 5 Weight:33 gm
BDT 480.00
BDT 480.00 tax incl.
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 480.00 tax incl.
BDT 480.00 tax incl.
BDT 0.00 Tax
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 0.00 Tax
BDT 480.00 tax incl.
More
In-Stock
In stock: 29

Follow us on Facebook