• Banner

Active filters
  • Categories: 3D Printed
  • Categories: Arduino Boards
  • Categories: Display
  • Categories: Enclosure
  • Categories: Instruments
  • Categories: Robots

Reference: RBD-0389

PL2303 USB to TTL Serial Converter

(0)
Adopt imported controller PL2303HX, which can stabilize the flash with high speed 500mA self-recovery fuse for protection Two data transmission indicator can monitor data transfer status in real time Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power The entire board is coated by the high quality transparent...
BDT 98.00
BDT 98.00 tax incl.
BDT 98.00 tax excl.
BDT 98.00 tax excl.
BDT 98.00 tax incl.
BDT 98.00 tax incl.
BDT 0.00 Tax
BDT 98.00 tax excl.
BDT 98.00 tax excl.
BDT 0.00 Tax
BDT 98.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-0384

MAX7219 Red Dot Matrix Module MCU Control Display Module DIY Kit For Arduino

(0)
Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 320 mA Display Dimensions: 32x32x6 (LxWxH) mm PCD Dimensions: 50×32 (LxW) mm Soldering is required
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 10

Reference: RBD-0263

Jumper Wire housing 7 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 7 jumper wires (7-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-1311

mDrawbot kit

(0)
mDrawBot is a 4-in-1 drawing robot kit  it can be assembled into 4 different drawing robots:  mScara. mCar.  mSpider.  mEggBot.
BDT 21,300.00
BDT 21,300.00 tax incl.
BDT 21,300.00 tax excl.
BDT 21,300.00 tax excl.
BDT 21,300.00 tax incl.
BDT 21,300.00 tax incl.
BDT 0.00 Tax
BDT 21,300.00 tax excl.
BDT 21,300.00 tax excl.
BDT 0.00 Tax
BDT 21,300.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0399

Graphic LCD 84x48 (Nokia 5110) Black on White for Arduino

(0)
Power supply voltage: 2.7 V-3.3 V/5 V Data interface level: 2.7-5V. Resolution: 84 x 48 pixel Backlight power supply voltage: highest 3.3 V. Backlight: Blue. RoboticsBD Note: Current stock is tested by us. 
BDT 260.00
BDT 260.00 tax incl.
BDT 260.00 tax excl.
BDT 260.00 tax excl.
BDT 260.00 tax incl.
BDT 260.00 tax incl.
BDT 0.00 Tax
BDT 260.00 tax excl.
BDT 260.00 tax excl.
BDT 0.00 Tax
BDT 260.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0396

Ultrasonic Transducer Waterproof Distance Measuring Sensor Module

(0)
Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions Small size, easy to use Operating Voltage: 5 V Sonar Sensing Range: 25-450 cm Max. Sensing Range: 450 cm Frequency: 40 KHz. RoboticsBD
BDT 615.00
BDT 615.00 tax incl.
BDT 615.00 tax excl.
BDT 615.00 tax excl.
BDT 615.00 tax incl.
BDT 615.00 tax incl.
BDT 0.00 Tax
BDT 615.00 tax excl.
BDT 615.00 tax excl.
BDT 0.00 Tax
BDT 615.00 tax incl.
More
In-Stock
In stock: 34

Reference: RBD-0286

Arduino Uno R3 Bumper

(0)
3D Printed Arduino Uno R3 Bumper or base.Short Circuit Prevention: Safeguard your microcontroller against the risk of short circuits when placing it on a flat conductive surface. The bumper acts as a protective barrier, reducing the chances of accidental electrical contact. Note: Arduino Uno is not included
BDT 30.00 BDT 50.00
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax incl.
More
In stock
In stock: 14

Reference: RBD-0269

Jumper Wire housing 8 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 8 jumper wires (8-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-0155

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328 Circuit Operating Voltage: 5V Clock frequency: 16MHz. Digital I/O Pins: 14 8 analog input port: A0 ~ A7. A pair of TTL level serial port transceiver : RX / TX. 6 PWM port: D3, D5, D6, D9, D10, D11. Support serial download.
BDT 680.00
BDT 680.00 tax incl.
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 680.00 tax incl.
BDT 680.00 tax incl.
BDT 0.00 Tax
BDT 680.00 tax excl.
BDT 680.00 tax excl.
BDT 0.00 Tax
BDT 680.00 tax incl.
More
In-Stock
In stock: 88

Reference: RBD-1523

Arduino Pro Mini 328 5V/16Mhz

(0)
Microcontroller: ATmega328P Circuit Operating Voltage: 5V Clock frequency: 16MHz. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. A pair of TTL level serial port transceiver : RX / TX.
BDT 430.00
BDT 430.00 tax incl.
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 430.00 tax incl.
BDT 430.00 tax incl.
BDT 0.00 Tax
BDT 430.00 tax excl.
BDT 430.00 tax excl.
BDT 0.00 Tax
BDT 430.00 tax incl.
More
In-Stock
In stock: 25

Reference: RBD-0706

UNI-T A12T Temperature Humidity Meter

(0)
Dual temperature measurement. RoboticsBD Clock function: 12/24 hour modes  Alarm clock: Rings up to 60s   Comfort level: comfortable, wet, dry
BDT 2,100.00
BDT 2,100.00 tax incl.
BDT 2,100.00 tax excl.
BDT 2,100.00 tax excl.
BDT 2,100.00 tax incl.
BDT 2,100.00 tax incl.
BDT 0.00 Tax
BDT 2,100.00 tax excl.
BDT 2,100.00 tax excl.
BDT 0.00 Tax
BDT 2,100.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-0401

LCD Module 8x2 Characters Display

(0)
Display: 8×2 character Outline: 58.0x32.0x10.0 VA: 37.8x16.0 Controller: SPLC780D Character: 2.96x5.56 Driver: 1/16
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 46

Reference: RBD-0371

NAO V5 STANDARD EDITION

(0)
The result of a unique combination of mechanical engineering and software, NAO is a character made up of a multitude of sensors, motors and software piloted by a made- to -measure operating system: NAOqi OS. The pack includes: One NAO V5 (red or blue) 1 Charger and 1 battery 2 years of warranty 1 Choregraphe License Full SDK and API
BDT 1,600,000.00
BDT 1,600,000.00 tax incl.
BDT 1,600,000.00 tax excl.
BDT 1,600,000.00 tax excl.
BDT 1,600,000.00 tax incl.
BDT 1,600,000.00 tax incl.
BDT 0.00 Tax
BDT 1,600,000.00 tax excl.
BDT 1,600,000.00 tax excl.
BDT 0.00 Tax
BDT 1,600,000.00 tax incl.
More
Out-of-Stock
In stock: -3

Reference: RBD-1681

Jumper Wire housing 4Pin

(0)
3D printed Dupont connector for Jumper cable 4pin
BDT 60.00
BDT 60.00 tax incl.
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 60.00 tax incl.
BDT 60.00 tax incl.
BDT 0.00 Tax
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 0.00 Tax
BDT 60.00 tax incl.
More
In-Stock
In stock: 17

Reference: RBD-0838

Arduino Pro Micro 5V/16MHz

(0)
ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD
BDT 870.00
BDT 870.00 tax incl.
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 870.00 tax incl.
BDT 870.00 tax incl.
BDT 0.00 Tax
BDT 870.00 tax excl.
BDT 870.00 tax excl.
BDT 0.00 Tax
BDT 870.00 tax incl.
More
In-Stock
In stock: 41

Reference: RBD-0709

UNI-T UT890D+ Digital Multimeter

(0)
6000 Counts True RMS voltage and current measurements Capacitance, Resistance, Buzzer, Diode
BDT 2,600.00 BDT 2,995.00
BDT 2,995.00 BDT 2,600.00 tax incl.
BDT 2,995.00 BDT 2,600.00 tax excl.
BDT 2,995.00 BDT 2,600.00 tax excl.
BDT 2,995.00 BDT 2,600.00 tax incl.
BDT 2,995.00 BDT 2,600.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 2,995.00 BDT 2,600.00 tax excl.
BDT 2,995.00 BDT 2,600.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 2,995.00 BDT 2,600.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0661

Standard LCD 16x2 Display Yellow Backlight

(0)
For Standard LCD 16x2 with Male Header. Press here For Standard LCD 16x2 with Female Header. Press here For Standard LCD 16x2 with I2C adapter board soldered. Press here. For Standard LCD 16x2 with White Background. Press here. For Standard LCD 16x2 with Blue Background. Press here.
BDT 240.00
BDT 240.00 tax incl.
BDT 240.00 tax excl.
BDT 240.00 tax excl.
BDT 240.00 tax incl.
BDT 240.00 tax incl.
BDT 0.00 Tax
BDT 240.00 tax excl.
BDT 240.00 tax excl.
BDT 0.00 Tax
BDT 240.00 tax incl.
More
In-Stock
In stock: 307

Reference: RBD-0372

BIOLOID Premium Robot Kit

(0)
• Comes with the CM-530 controller and AX-12A servos • Convenient, safe and expandable• All-round robot kit for education/robot competitions/entertainment• Can build various types of robot such as spider, dinosaur, and humanoid
BDT 240,000.00
BDT 240,000.00 tax incl.
BDT 240,000.00 tax excl.
BDT 240,000.00 tax excl.
BDT 240,000.00 tax incl.
BDT 240,000.00 tax incl.
BDT 0.00 Tax
BDT 240,000.00 tax excl.
BDT 240,000.00 tax excl.
BDT 0.00 Tax
BDT 240,000.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-2053

Arduino Pro Micro 5V/16MHz Type-C

(0)
ATMEGA32U4 running in 5V / 16MHz Support Arduino IDE V1.0.1 Micro USB interface programming on the board Four 10-bit ADC pin 12 digital I / O (5 PWM capability) Rx and Tx hardware serial connection. RoboticsBD
BDT 755.00
BDT 755.00 tax incl.
BDT 755.00 tax excl.
BDT 755.00 tax excl.
BDT 755.00 tax incl.
BDT 755.00 tax incl.
BDT 0.00 Tax
BDT 755.00 tax excl.
BDT 755.00 tax excl.
BDT 0.00 Tax
BDT 755.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-0711

UNI-T UT61A Digital Multimeter

(0)
Auto range MAX/MIN/REL mode Auto power off LCD backlight Analog bar graph
BDT 4,100.00 BDT 4,300.00
BDT 4,300.00 BDT 4,100.00 tax incl.
BDT 4,300.00 BDT 4,100.00 tax excl.
BDT 4,300.00 BDT 4,100.00 tax excl.
BDT 4,300.00 BDT 4,100.00 tax incl.
BDT 4,300.00 BDT 4,100.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 4,300.00 BDT 4,100.00 tax excl.
BDT 4,300.00 BDT 4,100.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 4,300.00 BDT 4,100.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0699

1.8" inch TFT LCD Display module ST7735S 128x160

(0)
Display Size: 1.8″ Driver IC: ST7735 Input Voltage (V): 3.3 to 5 Pixel Resolution: 128 x 160 Interface Type: SPI
BDT 590.00
BDT 590.00 tax incl.
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 590.00 tax incl.
BDT 590.00 tax incl.
BDT 0.00 Tax
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 0.00 Tax
BDT 590.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-0374

RoboBrothers RoboPhilo Humanoid Robot Ready to Walk

(0)
• Available in kit form or ready to walk • 20 degree-of-freedom humanoid robot comes assembled and ready to use • Controlled by a real-time IR remote, built-in actions or user-programmed actions• Includes graphical software interface
BDT 100,000.00
BDT 100,000.00 tax incl.
BDT 100,000.00 tax excl.
BDT 100,000.00 tax excl.
BDT 100,000.00 tax incl.
BDT 100,000.00 tax incl.
BDT 0.00 Tax
BDT 100,000.00 tax excl.
BDT 100,000.00 tax excl.
BDT 0.00 Tax
BDT 100,000.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2630

BATN Mini Bot - Plug and Play

(0)
Bluetooth Autonomous Tank Nano (BATN) BATN Mini Bot: plug-and-play robot for indoors & outdoors. Obstacle avoidance with ultrasonic range finder. Moves forward, backward, turns with tank tracks. Rechargeable battery for continuous operation. Pre-programmed Arduino Uno R3 brain. Motor control with L298P shield, buzzer, Bluetooth. Easy assembly, modular...
BDT 9,500.00
BDT 9,500.00 tax incl.
BDT 9,500.00 tax excl.
BDT 9,500.00 tax excl.
BDT 9,500.00 tax incl.
BDT 9,500.00 tax incl.
BDT 0.00 Tax
BDT 9,500.00 tax excl.
BDT 9,500.00 tax excl.
BDT 0.00 Tax
BDT 9,500.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-2534

4 DOF High Precision 3D-Printed Stepper Motor Robotic Arm

(0)
3D-printed robotic arm with 4 stepper motors and 1 servo motor for precise control Robot arm size: approximately 25 x 13 x 29 cm Features claws for easy gripping Includes all necessary 3D-printed parts and motors The color and claw mechanism of the Robotic arm  may vary as our stock rotates. Current stock comes as assembled. 
BDT 13,499.00
BDT 13,499.00 tax incl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax incl.
BDT 13,499.00 tax incl.
BDT 0.00 Tax
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 0.00 Tax
BDT 13,499.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0924

TM1637 LED Display Module for Arduino

(0)
Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 30 mA Display Dimensions: 42x24x12 (LxWxH) mm
BDT 120.00
BDT 120.00 tax incl.
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 120.00 tax incl.
BDT 120.00 tax incl.
BDT 0.00 Tax
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 0.00 Tax
BDT 120.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0712

UNI-T Scope Digital Multimeter UT81B

(0)
Signal input data processing auto measure  waveform storage and transfer AC/DC voltage and current resistance diode continuity frequency duty ratio capacitance
BDT 17,999.00
BDT 17,999.00 tax incl.
BDT 17,999.00 tax excl.
BDT 17,999.00 tax excl.
BDT 17,999.00 tax incl.
BDT 17,999.00 tax incl.
BDT 0.00 Tax
BDT 17,999.00 tax excl.
BDT 17,999.00 tax excl.
BDT 0.00 Tax
BDT 17,999.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0136

Arduino Due

(0)
Microcontroller: AT91SAM3X8E Operating Voltage: 3.3V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-16V Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 Analog Outputs Pins: 2 (DAC) A 32-bit core, that allows operations on 4 bytes wide data within a single CPU clock. CPU clock at 84Mhz 96KBytes of SRAM
BDT 3,990.00
BDT 3,990.00 tax incl.
BDT 3,990.00 tax excl.
BDT 3,990.00 tax excl.
BDT 3,990.00 tax incl.
BDT 3,990.00 tax incl.
BDT 0.00 Tax
BDT 3,990.00 tax excl.
BDT 3,990.00 tax excl.
BDT 0.00 Tax
BDT 3,990.00 tax incl.
More
In-Stock
In stock: 19

Reference: RBD-2695

US-015 Ultrasonic Module Housing

(0)
Custom 3D-printed enclosure designed specifically for the US-015 ultrasonic sensor module. Protects the sensor from dust, moisture, and impacts for enhanced durability and performance. Features two screw holes for convenient and secure mounting in various projects. Note: Filament Color may change as our stock rotates. 
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-2631

Brand: RoboticsBD

SteerEase Bluetooth Control Robot - Plug and Play

(0)
Effortless control: Steer your robot using the intuitive Bluetooth app. Versatility through Arduino: Endless customization and programming possibilities. Smart features: Agile chassis, precise motor control, and modular design. Ready to play: Fully functional out of the box for immediate exploration. Perfect for all levels: Ideal for beginners and...
BDT 6,995.00
BDT 6,995.00 tax incl.
BDT 6,995.00 tax excl.
BDT 6,995.00 tax excl.
BDT 6,995.00 tax incl.
BDT 6,995.00 tax incl.
BDT 0.00 Tax
BDT 6,995.00 tax excl.
BDT 6,995.00 tax excl.
BDT 0.00 Tax
BDT 6,995.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-1809

Digispark Pro - ATtiny167 with Micro USB

(0)
Digispark Pro  ATtiny167  Micro USB 16MHz
BDT 539.00 BDT 549.00
BDT 549.00 BDT 539.00 tax incl.
BDT 549.00 BDT 539.00 tax excl.
BDT 549.00 BDT 539.00 tax excl.
BDT 549.00 BDT 539.00 tax incl.
BDT 549.00 BDT 539.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 549.00 BDT 539.00 tax excl.
BDT 549.00 BDT 539.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 549.00 BDT 539.00 tax incl.
More
In-Stock
In stock: 29

Reference: RBD-1064

1.3 Inch I2C OLED Display Module 4pin- Blue

(0)
Size: 1.3 inch Resolution: 128 x 64 Controlling Chip: SSH1106 Driving Voltage: 3.3-5V Operating Temperature: -40~70 celsius Interface Type: IIC Light Color: Blue If you want to purchase White color 1.3 inch OLED display module click here
BDT 630.00
BDT 630.00 tax incl.
BDT 630.00 tax excl.
BDT 630.00 tax excl.
BDT 630.00 tax incl.
BDT 630.00 tax incl.
BDT 0.00 Tax
BDT 630.00 tax excl.
BDT 630.00 tax excl.
BDT 0.00 Tax
BDT 630.00 tax incl.
More
Last items in stock
In stock: 1

Follow us on Facebook