Home

  • Banner

Active filters
  • Categories: Arduino Boards
  • Categories: Enclosure
  • Categories: Motor Driver
On sale! Raspberry Pi 3 Transparent Acrylic Shell Case + Cooling Fan for Raspberry Pi 3 Quick view

Reference: RBD-0347

Transparent Acrylic Shell Case for Raspberry Pi 3 Model B/B+

(0)
9 Layer Acrylic stylish case with access to all Ports on Raspberry Pi 3 B/B+ Slot for Cooling Fan Easy to assemble with Nut-Bolts included Slots to route GPIO and CSI ribbon cable Cut-out for micro SC card at the bottom panel. RoboticsBD Note: Cooling fan is not included.
BDT 495.00
BDT 495.00 tax incl.
BDT 495.00 tax excl.
BDT 495.00 tax excl.
BDT 495.00 tax incl.
BDT 495.00 tax incl.
BDT 0.00 Tax
BDT 495.00 tax excl.
BDT 495.00 tax excl.
BDT 0.00 Tax
BDT 495.00 tax incl.
More
In-Stock
In stock: 9
Motor Shield L293D Robotics Bangladesh Quick view

Reference: RBD-0015

Motor Shield L293D

(0)
2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5%...
BDT 219.00
BDT 219.00 tax incl.
BDT 219.00 tax excl.
BDT 219.00 tax excl.
BDT 219.00 tax incl.
BDT 219.00 tax incl.
BDT 0.00 Tax
BDT 219.00 tax excl.
BDT 219.00 tax excl.
BDT 0.00 Tax
BDT 219.00 tax incl.
More
In-Stock
In stock: 133
Out-of-Stock Raspberry Pi Case with Fan and Heatsink Quick view

Reference: RBD-0906

Raspberry Pi Case with Fan and Heatsink

(0)
Slot for Cooling Fan Easy to assemble with Nut-Bolts included. RoboticsBD Cut-out for micro SC card at the bottom panel This simple case provides tough protection for your raspberry pi along with access to ports High Quality two-piece injection-molded ABS enclosure Click together design, no screws, standoffs or elastic bands required It is easy to use....
BDT 440.00
BDT 440.00 tax incl.
BDT 440.00 tax excl.
BDT 440.00 tax excl.
BDT 440.00 tax incl.
BDT 440.00 tax incl.
BDT 0.00 Tax
BDT 440.00 tax excl.
BDT 440.00 tax excl.
BDT 0.00 Tax
BDT 440.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Big Easy Driver - Stepper Motor Driver Quick view

Reference: RBD-0267

Big Easy Driver - Stepper Motor Driver

(0)
Bi-polar Microstepping Driver 2A/Phase Max 1.4-1.7A/Phase w/o Heatsink Max Motor Drive Voltage: 30V On-board 5V/3.3V Regulation Low RDS(ON) outputs Automatic current decay mode detection/selection Mixed and Slow current decay modes Synchronous rectification for low power dissipation Internal UVLO Crossover-current protection 3.3 and 5 V compatible logic...
BDT 1,600.00
BDT 1,600.00 tax incl.
BDT 1,600.00 tax excl.
BDT 1,600.00 tax excl.
BDT 1,600.00 tax incl.
BDT 1,600.00 tax incl.
BDT 0.00 Tax
BDT 1,600.00 tax excl.
BDT 1,600.00 tax excl.
BDT 0.00 Tax
BDT 1,600.00 tax incl.
More
Out-of-Stock
In stock: 0
On sale! Arduino Uno R3 Quick view

Reference: RBD-0094

Arduino Uno R3

(0)
The Arduino Uno R3 High-Quality Edition Arduino UNO in Bangladesh Micro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6. The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...
BDT 1,050.00
BDT 1,050.00 tax incl.
BDT 1,050.00 tax excl.
BDT 1,050.00 tax excl.
BDT 1,050.00 tax incl.
BDT 1,050.00 tax incl.
BDT 0.00 Tax
BDT 1,050.00 tax excl.
BDT 1,050.00 tax excl.
BDT 0.00 Tax
BDT 1,050.00 tax incl.
More
In-Stock
In stock: 163
Ultrasonic Sensor Acrylic Mounting Bracket Quick view

Reference: RBD-0920

Ultrasonic Sensor Acrylic Mounting Bracket

(0)
Acrylic Body. Easy to install. compatible with HC-SR04
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 100
On sale! Arduino Uno R3 SMD Robotics Bangladesh Quick view

Reference: RBD-0323

Arduino Uno R3 SMD

(0)
Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital I / O Pins 14 (of which 6 provide PWM output) RoboticsBD Analog Input Pins: 6 A programming cable is included.
BDT 574.00
BDT 574.00 tax incl.
BDT 574.00 tax excl.
BDT 574.00 tax excl.
BDT 574.00 tax incl.
BDT 574.00 tax incl.
BDT 0.00 Tax
BDT 574.00 tax excl.
BDT 574.00 tax excl.
BDT 0.00 Tax
BDT 574.00 tax incl.
More
In-Stock
In stock: 151
- BDT 155.00 Reduced price 16 Channel 12 bit PWM / Servo Driver I2C interface PCA9685 Robotics Bangladesh Quick view

Reference: RBD-0289

16 Channel 12 bit PWM / Servo Driver I2C interface PCA9685

(0)
Adjustable frequency PWM up to about 1.6 KHz 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate Configurable push-pull or an open-drain output The output enable pin to quickly disable all the outputs Terminal block for power input Reverse polarity protection on the terminal block input Green power-good LED
BDT 525.00 BDT 680.00
BDT 680.00 BDT 525.00 tax incl.
BDT 680.00 BDT 525.00 tax excl.
BDT 680.00 BDT 525.00 tax excl.
BDT 680.00 BDT 525.00 tax incl.
BDT 680.00 BDT 525.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 680.00 BDT 525.00 tax excl.
BDT 680.00 BDT 525.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 680.00 BDT 525.00 tax incl.
More
In-Stock
In stock: 50
On sale! Arduino Uno R3 Robotics Bangladesh Quick view

Reference: RBD-2335

Arduino Uno R3

(0)
The Arduino Uno R3 Standard-Quality Edition Micro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6 We are pleased to present a more cost-effective version of the Arduino Uno R3, a widely acclaimed and versatile platform for electronics...
BDT 710.00
BDT 710.00 tax incl.
BDT 710.00 tax excl.
BDT 710.00 tax excl.
BDT 710.00 tax incl.
BDT 710.00 tax incl.
BDT 0.00 Tax
BDT 710.00 tax excl.
BDT 710.00 tax excl.
BDT 0.00 Tax
BDT 710.00 tax incl.
More
In-Stock
In stock: 465
2 Axis Pan Tilt Brackets For Camera/Sensors for Servo SG90S MG90S Robotics Bangladesh Quick view

Reference: RBD-0921

2 Axis Pan Tilt Brackets For Camera/Sensors for Servo SG90S MG90S

(0)
PV Nylon Head Two Axial plastic Two axial platform Anti-vibration lightweight Good design and shape Net weight 20g Color : Black Material: Plastic.
BDT 480.00
BDT 480.00 tax incl.
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 480.00 tax incl.
BDT 480.00 tax incl.
BDT 0.00 Tax
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 0.00 Tax
BDT 480.00 tax incl.
More
In-Stock
In stock: 218
32 Channel USB UART Servo Motor Controller Quick view

Reference: RBD-0306

Torobot 32 Channel USB UART Servo Motor Controller

(0)
Baud rate (USB): 115200 Baud rate (bluetooth, UART): 9600 Storage Flash capacity: 16M Mode to choose: 4 types Simultaneous controlling servo number: 32 channel Max action groups: 256 groups Communication agreement: UART Cross platform operation, can support WindowsXP, WindowsVisit, Windows7, Windows8, Windows10, Linux,FreeBsd, MAC OS, Android
BDT 4,400.00
BDT 4,400.00 tax incl.
BDT 4,400.00 tax excl.
BDT 4,400.00 tax excl.
BDT 4,400.00 tax incl.
BDT 4,400.00 tax incl.
BDT 0.00 Tax
BDT 4,400.00 tax excl.
BDT 4,400.00 tax excl.
BDT 0.00 Tax
BDT 4,400.00 tax incl.
More
In-Stock
In stock: 12
Clear Acrylic Case For W1209 Digital Temperature Controller Robotics Bangladesh Quick view

Reference: RBD-1327

Clear Acrylic Case For W1209 Digital Temperature Controller

(0)
Package includes: 1 pcs x Acrylic Box ( without W1209 module ) DIY cover for W1209 Control Module   Acrylic material looks transparent(may need to tear down the film).   Easy for electronic enthusiasts to assemble.
BDT 110.00
BDT 110.00 tax incl.
BDT 110.00 tax excl.
BDT 110.00 tax excl.
BDT 110.00 tax incl.
BDT 110.00 tax incl.
BDT 0.00 Tax
BDT 110.00 tax excl.
BDT 110.00 tax excl.
BDT 0.00 Tax
BDT 110.00 tax incl.
More
In-Stock
In stock: 36
L298N H-Bridge Dual Motor Driver, Stepper Motor Driver Quick view

Reference: RBD-0376

L298N H-Bridge Dual Motor Driver, Stepper Motor Driver

(0)
Current Sense for each motor. RoboticsBD Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes
BDT 195.00
BDT 195.00 tax incl.
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 195.00 tax incl.
BDT 195.00 tax incl.
BDT 0.00 Tax
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 0.00 Tax
BDT 195.00 tax incl.
More
In Stock
In stock: 428
Arduino Mega 2560 R3 Robotics Bangladesh Quick view

Reference: RBD-0009

Arduino Mega 2560 R3

(0)
54 Digital I/O terminals (14 of which have programmable PWM outputs). 16 Analog Inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock. RoboticsBD Operating voltage: 6 ~ 12v. Dimensions: 110 x 53 x 15 mm.
BDT 1,895.00
BDT 1,895.00 tax incl.
BDT 1,895.00 tax excl.
BDT 1,895.00 tax excl.
BDT 1,895.00 tax incl.
BDT 1,895.00 tax incl.
BDT 0.00 Tax
BDT 1,895.00 tax excl.
BDT 1,895.00 tax excl.
BDT 0.00 Tax
BDT 1,895.00 tax incl.
More
In-Stock
In stock: 35
Acrylic Case Box with Cooling Fan for NVIDIA Jetson Nano Robotics Bangladesh Quick view

Reference: RBD-1410

Acrylic Case Box with Cooling Fan for NVIDIA Jetson Nano

(0)
Compatible with Nvidia Jetson Nano Easy to assemble Slots to access all ports Cut-out for a fan at the top
BDT 980.00
BDT 980.00 tax incl.
BDT 980.00 tax excl.
BDT 980.00 tax excl.
BDT 980.00 tax incl.
BDT 980.00 tax incl.
BDT 0.00 Tax
BDT 980.00 tax excl.
BDT 980.00 tax excl.
BDT 0.00 Tax
BDT 980.00 tax incl.
More
In-Stock
In stock: 14
Arduino Mega 2560 CH340 Robotics Bangladesh Quick view

Reference: RBD-1397

Arduino Mega 2560 CH340

(0)
Programmer: CH340 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader
BDT 1,345.00
BDT 1,345.00 tax incl.
BDT 1,345.00 tax excl.
BDT 1,345.00 tax excl.
BDT 1,345.00 tax incl.
BDT 1,345.00 tax incl.
BDT 0.00 Tax
BDT 1,345.00 tax excl.
BDT 1,345.00 tax excl.
BDT 0.00 Tax
BDT 1,345.00 tax incl.
More
In-Stock
In stock: 65
Monster Moto Shield Dual VNH2SP30 Motor Driver Module 30A Robotics Bangladesh Quick view

Reference: RBD-0377

Monster Moto Shield Dual VNH2SP30 Motor Driver Module 30A

(0)
Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD
BDT 6,650.00
BDT 6,650.00 tax incl.
BDT 6,650.00 tax excl.
BDT 6,650.00 tax excl.
BDT 6,650.00 tax incl.
BDT 6,650.00 tax incl.
BDT 0.00 Tax
BDT 6,650.00 tax excl.
BDT 6,650.00 tax excl.
BDT 0.00 Tax
BDT 6,650.00 tax incl.
More
In-Stock
In stock: 11
Raspberry Pi Zero Official Case with GPIO and Camera Hole for Raspberry Pi Zero & Zero W Robotics Bangladesh Quick view

Reference: RBD-1413

Brand: Raspberry Pi Official

Raspberry Pi Zero Official Case with GPIO and Camera Hole for Raspberry Pi Zero & Zero W

(0)
Material: ABS- 3 different cover board- Color: White & Red- Use For: Raspberry Pi Zero V1.3 and Raspberry Pi Zero W- Camera Cable Length: 37mm
BDT 330.00
BDT 330.00 tax incl.
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 330.00 tax incl.
BDT 330.00 tax incl.
BDT 0.00 Tax
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 0.00 Tax
BDT 330.00 tax incl.
More
In-Stock
In stock: 15
Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU Robotics Bangladesh Quick view

Reference: RBD-1214

Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU

(0)
The board is compatible with Mega 2560.  excellent solution for developing projects based on ATmega2560. The board can be powered directly through the Micro USB connector The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.
BDT 1,590.00
BDT 1,590.00 tax incl.
BDT 1,590.00 tax excl.
BDT 1,590.00 tax excl.
BDT 1,590.00 tax incl.
BDT 1,590.00 tax incl.
BDT 0.00 Tax
BDT 1,590.00 tax excl.
BDT 1,590.00 tax excl.
BDT 0.00 Tax
BDT 1,590.00 tax incl.
More
In-Stock
In stock: 15
Ardumoto Shield L298P Motor Driver Robotics Bangladesh Quick view

Reference: RBD-0392

Ardumoto Shield L298P Motor Driver

(0)
L298P based Arduino motor driver shield Forward, Backward steering indicators Can Drive 2 DC Motors Up to 2A of Maximum Current. RoboticsBD
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 13
Back to Back 4S AA Battery Holder Robotics Bangladesh Quick view

Reference: RBD-1692

Back to Back 4S AA Battery Holder

(0)
Color: Black lightweight Convenient to carry this battery box holder with wires Weight: About 9g Wire Length: Approx 14cm
BDT 160.00
BDT 160.00 tax incl.
BDT 160.00 tax excl.
BDT 160.00 tax excl.
BDT 160.00 tax incl.
BDT 160.00 tax incl.
BDT 0.00 Tax
BDT 160.00 tax excl.
BDT 160.00 tax excl.
BDT 0.00 Tax
BDT 160.00 tax incl.
More
In-Stock
In stock: 35
DRV8825 Stepper Motor Driver Module Quick view

Reference: RBD-0434

DRV8825 Stepper Motor Driver Module

(0)
Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm. RoboticsBD
BDT 230.00
BDT 230.00 tax incl.
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 230.00 tax incl.
BDT 230.00 tax incl.
BDT 0.00 Tax
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 0.00 Tax
BDT 230.00 tax incl.
More
Last items in stock
In stock: 2
Arduino Nano Quick view

Reference: RBD-0032

Arduino Nano

(0)
USB Driver: CH340 Operating Voltage (logic level): 5V With Mini USB 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please select...
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In-Stock
In stock: 549
10 X 1.5V AA Back to Back Plastic Battery Holder with Wire Robotics Bangladesh Quick view

Reference: RBD-1742

10 X 1.5V AA Back to Back Plastic Battery Holder with Wire

(0)
Holds 10 x AA batteries Easy install, convenient to use. Dimensions mm (LxWxH): 78X 60 X 28 Weight: 27.4 gm Material: Plastic Internal Connection: Series
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 53
Arduino Nano R3 Robotics Bangladesh Quick view

Reference: RBD-0926

Arduino Nano R3

(0)
USB Driver: FT232 Manufacturer: Gravitech Operating Voltage (logic level): 5V 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please...
BDT 690.00
BDT 690.00 tax incl.
BDT 690.00 tax excl.
BDT 690.00 tax excl.
BDT 690.00 tax incl.
BDT 690.00 tax incl.
BDT 0.00 Tax
BDT 690.00 tax excl.
BDT 690.00 tax excl.
BDT 0.00 Tax
BDT 690.00 tax incl.
More
In-Stock
In stock: 32
A4988 StepStick Stepper Motor Driver Module Quick view

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

(0)
Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 65
NANO V3.0 Upgraded MH-Tiny ATTINY88 Micro Development Board 16MHz Robotics Bangladesh Quick view

Reference: RBD-2199

NANO V3.0 Upgraded MH-Tiny ATTINY88 Micro Development Board 16MHz

(0)
Compatible with the Arduino IDE, making it easy for beginners to start using Smaller and cheaper than traditional Arduino boards Powered by a 16.0 MHz microcontroller Fully assembled except for headers, allowing for easy soldering Great for projects where size and cost are a concern Perfect for beginners to jump into electronics Can be used for a variety...
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 17
6 x AA Battery Holder Box (Back-to-Back) Robotics Bangladesh Quick view

Reference: RBD-1743

6 x AA Battery Holder Box (Back-to-Back)

(0)
Holds 6 x AA batteries Easy install, convenient to use. Dimensions mm (LxWxH): 58X 48 X 28 Weight: 15.6 gm Material: Plastic Internal Connection: Series
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In-Stock
In stock: 30
30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Shield module For Arduino Quick view

Reference: RBD-0557

30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Module For Arduino

(0)
Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD
BDT 2,750.00
BDT 2,750.00 tax incl.
BDT 2,750.00 tax excl.
BDT 2,750.00 tax excl.
BDT 2,750.00 tax incl.
BDT 2,750.00 tax incl.
BDT 0.00 Tax
BDT 2,750.00 tax excl.
BDT 2,750.00 tax excl.
BDT 0.00 Tax
BDT 2,750.00 tax incl.
More
In-Stock
In stock: 4
Out-of-Stock Argon ONE M.2 Case for Raspberry Pi 4 Robotics Bangladesh Quick view

Reference: RBD-1828

Argon ONE M.2 Case for Raspberry Pi 4

(0)
Sleek aluminum alloy enclosure Plastic base for excellent Wi-Fi signal strength Easy installation with magnetic removable top Easily accessible GPIO with color-coded pinouts M.2 SATA SSD NOT INCLUDED
BDT 6,990.00
BDT 6,990.00 tax incl.
BDT 6,990.00 tax excl.
BDT 6,990.00 tax excl.
BDT 6,990.00 tax incl.
BDT 6,990.00 tax incl.
BDT 0.00 Tax
BDT 6,990.00 tax excl.
BDT 6,990.00 tax excl.
BDT 0.00 Tax
BDT 6,990.00 tax incl.
More
Out-of-Stock
In stock: -7
Arduino NANO I/O Extension Shield Quick view

Reference: RBD-0987

Arduino NANO I/O Extension Shield

(0)
Compatible with Arduino NANO All digital and analog pins breakout Compact size; External power supply current support Leads all pins out, convenient for wiring and doing experiments.
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 37
DC 5V Stepper Motor + ULN2003 Driver Board (28BYJ-48) for Arduino Quick view

Reference: RBD-0573

DC 5V Stepper Motor with ULN2003 Driver Board 28BYJ-48

(0)
Rated voltage: 5V DC Reduction Ratio: 64:1 Step Angle: 5.625° /64 Frequency: 100Hz Self-positioning Torque: >34.3mN.m Friction torque: 600-1200 gf.cm Pull in torque: 300 gf.cm
BDT 199.00
BDT 199.00 tax incl.
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 199.00 tax incl.
BDT 199.00 tax incl.
BDT 0.00 Tax
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 0.00 Tax
BDT 199.00 tax incl.
More
In-Stock
In stock: 104
Back to top

Follow us on Facebook

Facebook