Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 3.00 - BDT 70,000.00

Categories

Categories

Jumper Wire Type

Jumper Wire Type

Brand

Brand

Weight

Weight

  • 0 kg - 4,000 kg

  • Banner

Active filters
  • Categories: Arduino Boards
  • Categories: Arduino Shield & Module
  • Categories: Motor
  • Categories: Motor Driver
  • Categories: Programmer
  • Categories: Robotics Parts

Reference: RBD-0015

Motor Shield L293D

(0)
2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5%...
BDT 219.00
BDT 219.00 tax incl.
BDT 219.00 tax excl.
BDT 219.00 tax excl.
BDT 219.00 tax incl.
BDT 219.00 tax incl.
BDT 0.00 Tax
BDT 219.00 tax excl.
BDT 219.00 tax excl.
BDT 0.00 Tax
BDT 219.00 tax incl.
More
In-Stock
In stock: 133

Reference: RBD-0412

PICkit3 Microchip MPLAB PICkit 3 PIC In-Circuit Programmer Debugger for PIC and dsPIC Flash Chips

(0)
Microchip's PICkit3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. The MPLAB PICkit3 allows debugging and programming of PIC® and dsPIC® Flash microcontrollers at a most affordable price.
BDT 2,500.00
BDT 2,500.00 tax incl.
BDT 2,500.00 tax excl.
BDT 2,500.00 tax excl.
BDT 2,500.00 tax incl.
BDT 2,500.00 tax incl.
BDT 0.00 Tax
BDT 2,500.00 tax excl.
BDT 2,500.00 tax excl.
BDT 0.00 Tax
BDT 2,500.00 tax incl.
More
Out-of-Stock
In stock: -2

Reference: RBD-0218

High Torque Gear Motor 12V, 50 RPM

(0)
High Torque Gear Motor 12V, 50 RPM Volt: DC 12V RPM: 50 Torque 13KG/CM
BDT 750.00
BDT 750.00 tax incl.
BDT 750.00 tax excl.
BDT 750.00 tax excl.
BDT 750.00 tax incl.
BDT 750.00 tax incl.
BDT 0.00 Tax
BDT 750.00 tax excl.
BDT 750.00 tax excl.
BDT 0.00 Tax
BDT 750.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0094

Arduino Uno R3

(0)
The Arduino Uno R3 High-Quality Edition Arduino UNO in Bangladesh Micro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6. The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...
BDT 1,050.00
BDT 1,050.00 tax incl.
BDT 1,050.00 tax excl.
BDT 1,050.00 tax excl.
BDT 1,050.00 tax incl.
BDT 1,050.00 tax incl.
BDT 0.00 Tax
BDT 1,050.00 tax excl.
BDT 1,050.00 tax excl.
BDT 0.00 Tax
BDT 1,050.00 tax incl.
More
In-Stock
In stock: 163

Reference: RBD-0028

Arduino Ethernet Shield W5100

(0)
Based on the W5100Based on the Wiznet W5100 allows an Arduino board to connect to the internet. Stackable Design, can directly be supported by for Arduino official Ethernet Library. Supports up to four simultaneous socket connections Can be used to store files for serving over the network. Can be accessed using the Mini SD TF library. IEEE802.3af...
BDT 1,170.00
BDT 1,170.00 tax incl.
BDT 1,170.00 tax excl.
BDT 1,170.00 tax excl.
BDT 1,170.00 tax incl.
BDT 1,170.00 tax incl.
BDT 0.00 Tax
BDT 1,170.00 tax excl.
BDT 1,170.00 tax excl.
BDT 0.00 Tax
BDT 1,170.00 tax incl.
More
In-Stock
In stock: 23

Reference: RBD-0022

Ultrasonic Sonar Sensor HC-SR04

(0)
Affordable Price Operating Voltage: 5 V Sonar Sensing Range: 2-400 cm Max. Sensing Range: 450 cm Frequency: 40 kHz RoboticsBD
BDT 93.00
BDT 93.00 tax incl.
BDT 93.00 tax excl.
BDT 93.00 tax excl.
BDT 93.00 tax incl.
BDT 93.00 tax incl.
BDT 0.00 Tax
BDT 93.00 tax excl.
BDT 93.00 tax excl.
BDT 0.00 Tax
BDT 93.00 tax incl.
More
In-Stock
In stock: 524

Reference: RBD-0323

Arduino Uno R3 SMD

(0)
Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital I / O Pins 14 (of which 6 provide PWM output) RoboticsBD Analog Input Pins: 6 A programming cable is included.
BDT 574.00
BDT 574.00 tax incl.
BDT 574.00 tax excl.
BDT 574.00 tax excl.
BDT 574.00 tax incl.
BDT 574.00 tax incl.
BDT 0.00 Tax
BDT 574.00 tax excl.
BDT 574.00 tax excl.
BDT 0.00 Tax
BDT 574.00 tax incl.
More
In-Stock
In stock: 151

Reference: RBD-0023

HC-SR501 PIR Motion Sensor

(0)
Wide Working Voltage Range: DC 4.5V- 20V Current Drain: <60uA Detection Angle: <140° Detection Distance: 3 to 7m (can be adjusted) Blockade time: 2.5s (Default)  Work temperature: -20-+80°C
BDT 95.00
BDT 95.00 tax incl.
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 95.00 tax incl.
BDT 95.00 tax incl.
BDT 0.00 Tax
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 0.00 Tax
BDT 95.00 tax incl.
More
In Stock
In stock: 386

Reference: RBD-2335

Arduino Uno R3

(0)
The Arduino Uno R3 Standard-Quality Edition Micro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6 We are pleased to present a more cost-effective version of the Arduino Uno R3, a widely acclaimed and versatile platform for electronics...
BDT 710.00
BDT 710.00 tax incl.
BDT 710.00 tax excl.
BDT 710.00 tax excl.
BDT 710.00 tax incl.
BDT 710.00 tax incl.
BDT 0.00 Tax
BDT 710.00 tax excl.
BDT 710.00 tax excl.
BDT 0.00 Tax
BDT 710.00 tax incl.
More
In-Stock
In stock: 465

Reference: RBD-1102

ST-Link V2 Programmer For STM8 and STM32

(0)
PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable! Interface definition directly marked on the shell, clear, convenient and practical! 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V Shell characters using laser engraving, never fade off! Permanent clarity! 500MA internal...
BDT 585.00
BDT 585.00 tax incl.
BDT 585.00 tax excl.
BDT 585.00 tax excl.
BDT 585.00 tax incl.
BDT 585.00 tax incl.
BDT 0.00 Tax
BDT 585.00 tax excl.
BDT 585.00 tax excl.
BDT 0.00 Tax
BDT 585.00 tax incl.
More
In-Stock
In stock: 48

Reference: RBD-0309

3650 Brushless Motor 3930KV + 60A Waterproof BEAST Series ESC

(0)
4 poles 12 slot Hi-torque motor design CNC machined 6061 T6 windings maximizes efficiency High RPM ABEC5 oversize bearings Universal fit, fit all 1/10 brushless cars-multi-mounting system for M3 screws Precision balanced rotor, smoothness for best reliability and maximum RPM
BDT 8,000.00
BDT 8,000.00 tax incl.
BDT 8,000.00 tax excl.
BDT 8,000.00 tax excl.
BDT 8,000.00 tax incl.
BDT 8,000.00 tax incl.
BDT 0.00 Tax
BDT 8,000.00 tax excl.
BDT 8,000.00 tax excl.
BDT 0.00 Tax
BDT 8,000.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0040

Arduino Bluetooth Module HC-06

(0)
Bases at CSR BC04 Bluetooth technology. with build-in 2.4GHz PCB antenna It’s at the Bluetooth class 2 power level. Range test: 10 meters Operating voltage: 3.3V to 6V DC Operating current in pairing is in the range of 30~40mA.
BDT 315.00
BDT 315.00 tax incl.
BDT 315.00 tax excl.
BDT 315.00 tax excl.
BDT 315.00 tax incl.
BDT 315.00 tax incl.
BDT 0.00 Tax
BDT 315.00 tax excl.
BDT 315.00 tax excl.
BDT 0.00 Tax
BDT 315.00 tax incl.
More
In-Stock
In stock: 306

Reference: RBD-1103

ALTERA Mini USB Blaster Cable for CPLD FPGA NIOS JTAG Programmer

(0)
Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data. Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000 and MAXII. FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc. Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc....
BDT 770.00
BDT 770.00 tax incl.
BDT 770.00 tax excl.
BDT 770.00 tax excl.
BDT 770.00 tax incl.
BDT 770.00 tax incl.
BDT 0.00 Tax
BDT 770.00 tax excl.
BDT 770.00 tax excl.
BDT 0.00 Tax
BDT 770.00 tax incl.
More
In-Stock
In stock: 29

Reference: RBD-0820

Off-Road Wheels - 130x60mm (Single)

(0)
"Take on any terrain with our burly off-road wheels." "Get the grip and stability you need with our deep-treaded tires." "Easy-to-mount and built to last - our off-road wheels won't let you down."
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
In-Stock
In stock: 46

Reference: RBD-0009

Arduino Mega 2560 R3

(0)
54 Digital I/O terminals (14 of which have programmable PWM outputs). 16 Analog Inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock. RoboticsBD Operating voltage: 6 ~ 12v. Dimensions: 110 x 53 x 15 mm.
BDT 1,895.00
BDT 1,895.00 tax incl.
BDT 1,895.00 tax excl.
BDT 1,895.00 tax excl.
BDT 1,895.00 tax incl.
BDT 1,895.00 tax incl.
BDT 0.00 Tax
BDT 1,895.00 tax excl.
BDT 1,895.00 tax excl.
BDT 0.00 Tax
BDT 1,895.00 tax incl.
More
In-Stock
In stock: 35

Reference: RBD-1397

Arduino Mega 2560 CH340

(0)
Programmer: CH340 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader
BDT 1,345.00
BDT 1,345.00 tax incl.
BDT 1,345.00 tax excl.
BDT 1,345.00 tax excl.
BDT 1,345.00 tax incl.
BDT 1,345.00 tax incl.
BDT 0.00 Tax
BDT 1,345.00 tax excl.
BDT 1,345.00 tax excl.
BDT 0.00 Tax
BDT 1,345.00 tax incl.
More
In-Stock
In stock: 65

Reference: RBD-1104

USBTiny AVR ISP Programmer Bootloader For Arduino IDE

(0)
Isp interface: 6 PIN Isp interface: 10 PIN Power supply options: USB power Power supply options: external power supply (remove jumper cap)
BDT 900.00
BDT 900.00 tax incl.
BDT 900.00 tax excl.
BDT 900.00 tax excl.
BDT 900.00 tax incl.
BDT 900.00 tax incl.
BDT 0.00 Tax
BDT 900.00 tax excl.
BDT 900.00 tax excl.
BDT 0.00 Tax
BDT 900.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-0715

High Torque Gear Motor 12V 100RPM 25GA

(0)
Voltage: 12V DC RPM:100RPM Diameter: 25mm Low Noise Shaft equips metal bushes for long life. Metal Gears for High performance It comes with High-Quality gears. High torque at very low Current Consumptions
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
In-Stock
In stock: 31

Reference: RBD-1214

Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU

(0)
The board is compatible with Mega 2560.  excellent solution for developing projects based on ATmega2560. The board can be powered directly through the Micro USB connector The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.
BDT 1,590.00
BDT 1,590.00 tax incl.
BDT 1,590.00 tax excl.
BDT 1,590.00 tax excl.
BDT 1,590.00 tax incl.
BDT 1,590.00 tax incl.
BDT 0.00 Tax
BDT 1,590.00 tax excl.
BDT 1,590.00 tax excl.
BDT 0.00 Tax
BDT 1,590.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-1106

XGecu Super Mini Pro T48 Universal Programmer

(0)
XGecu Super Mini Pro T48 Universal Programmer
BDT 7,590.00
BDT 7,590.00 tax incl.
BDT 7,590.00 tax excl.
BDT 7,590.00 tax excl.
BDT 7,590.00 tax incl.
BDT 7,590.00 tax incl.
BDT 0.00 Tax
BDT 7,590.00 tax excl.
BDT 7,590.00 tax excl.
BDT 0.00 Tax
BDT 7,590.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-0750

85mm Antiskid Shockproof Wheels, Smart Car Robot Tires with 37GB Motor

(0)
Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor Diameter: 85 mm Width : 38 mm The material of Wheel: High-strength plastic The material of Tyre: Rubber Color: Black Tyre + Blue Rim
BDT 2,350.00
BDT 2,350.00 tax incl.
BDT 2,350.00 tax excl.
BDT 2,350.00 tax excl.
BDT 2,350.00 tax incl.
BDT 2,350.00 tax incl.
BDT 0.00 Tax
BDT 2,350.00 tax excl.
BDT 2,350.00 tax excl.
BDT 0.00 Tax
BDT 2,350.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0392

Ardumoto Shield L298P Motor Driver

(0)
L298P based Arduino motor driver shield Forward, Backward steering indicators Can Drive 2 DC Motors Up to 2A of Maximum Current. RoboticsBD
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 13

Reference: RBD-1212

USB to Serial RS232 DB9 Converter Cable

(0)
Single crystal 12M Tablet 340 USB port to serial port communication. USB1.1/2.0 compliant solution. Built-in 128 byte TX/512 byte RX buffer. Supports auto-Handshake Protocol. Support Win95/98/98se/ME/2000/XP/win7 32bit 64bit/Vista/supports full speed USB data transfer protocol. Design of electromagnetic interference. Data Exchange application. CH340 USB...
BDT 299.00
BDT 299.00 tax incl.
BDT 299.00 tax excl.
BDT 299.00 tax excl.
BDT 299.00 tax incl.
BDT 299.00 tax incl.
BDT 0.00 Tax
BDT 299.00 tax excl.
BDT 299.00 tax excl.
BDT 0.00 Tax
BDT 299.00 tax incl.
More
In-Stock
In stock: 59

Reference: 0828

Single Axis Servo Bracket

(0)
Supported Motors: 10kg-cm servos (such as MG995, MG996) This product is made of high-quality materials and is durable. Various sensors can be installed to complete a variety of novel interactive works through the servo controller. It is convenient to install the camera, which can realize image monitoring and image recognition and tracking. Choose your...
BDT 220.00
BDT 220.00 tax incl.
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 220.00 tax incl.
BDT 220.00 tax incl.
BDT 0.00 Tax
BDT 220.00 tax excl.
BDT 220.00 tax excl.
BDT 0.00 Tax
BDT 220.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-0434

DRV8825 Stepper Motor Driver Module

(0)
Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm. RoboticsBD
BDT 230.00
BDT 230.00 tax incl.
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 230.00 tax incl.
BDT 230.00 tax incl.
BDT 0.00 Tax
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 0.00 Tax
BDT 230.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-0295

Servo Motor MG995 360 Degree Continuous Rotation

(0)
Model: MG995 Weight: 55 gm Operating voltage: 4.8V~ 7.2V Servo Plug: JR Stall torque @4.8V : 9.4kg-cm Stall torque @6.6V : 11kg-cm Continuous rotation servos are like regular hobby RC servos but modified to offer speed control instead of position control. They're essentially compact, affordable motors with integrated motor drivers. Add a wheel, and...
BDT 770.00
BDT 770.00 tax incl.
BDT 770.00 tax excl.
BDT 770.00 tax excl.
BDT 770.00 tax incl.
BDT 770.00 tax incl.
BDT 0.00 Tax
BDT 770.00 tax excl.
BDT 770.00 tax excl.
BDT 0.00 Tax
BDT 770.00 tax incl.
More
In-Stock
In stock: 62

Reference: RBD-0032

Arduino Nano

(0)
USB Driver: CH340 Operating Voltage (logic level): 5V With Mini USB 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please select...
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In-Stock
In stock: 549

Reference: RBD-0926

Arduino Nano R3

(0)
USB Driver: FT232 Manufacturer: Gravitech Operating Voltage (logic level): 5V 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please...
BDT 690.00
BDT 690.00 tax incl.
BDT 690.00 tax excl.
BDT 690.00 tax excl.
BDT 690.00 tax incl.
BDT 690.00 tax incl.
BDT 0.00 Tax
BDT 690.00 tax excl.
BDT 690.00 tax excl.
BDT 0.00 Tax
BDT 690.00 tax incl.
More
In-Stock
In stock: 32

Reference: RBD-0716

65mm Rubber Wheel with 25GA Motor Mounting Bracket

(0)
Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor Diameter: 65 mm Width : 28 mm The material of Wheel: High-strength plastic The material of Tire: Rubber Color: Blue Rim Black Tire.
BDT 620.00
BDT 620.00 tax incl.
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 620.00 tax incl.
BDT 620.00 tax incl.
BDT 0.00 Tax
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 0.00 Tax
BDT 620.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

(0)
Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 65

Reference: RBD-0297

Analog Feedback Servo MG996R

(0)
Weight: 55g Dimension: 40.7×19.7×42.9mm Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v) Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v) Operating voltage: 4.8 ~ 6.6V Gear Type: Metal gear Dead band width: 1us Wire length: 32cm
BDT 1,200.00
BDT 1,200.00 tax incl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax incl.
BDT 1,200.00 tax incl.
BDT 0.00 Tax
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 0.00 Tax
BDT 1,200.00 tax incl.
More
Last items in stock
In stock: 3

Follow us on Facebook