• Banner

Active filters
  • Categories: Arduino Boards
  • Categories: CNC & Laser Cutter
  • Categories: Keypad /Touch/ Human Interface
  • Categories: Motor Driver

Reference: RBD-0015

Motor Shield L293D

(0)
2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5%...
BDT 219.00
BDT 219.00 tax incl.
BDT 219.00 tax excl.
BDT 219.00 tax excl.
BDT 219.00 tax incl.
BDT 219.00 tax incl.
BDT 0.00 Tax
BDT 219.00 tax excl.
BDT 219.00 tax excl.
BDT 0.00 Tax
BDT 219.00 tax incl.
More
In-Stock
In stock: 133

Reference: RBD-2156

4×4 Matrix 16 Keyboard Keypad

(0)
Easy communication with any microcontroller. Tactile type switches. Over 1,000,000 operations per key. Contact rated for 12V dc @ 20mA. Over 1,000,000 operations per key.
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 79

Reference: RBD-1752

Ortur Laser Master 2 20W with STM32 MCU High Speed Ortur Laser Engraver and Cutter Kit

(0)
Ortur Laser Master 2 Model: Ortur OLM2-LU1-4 20W Year: 2021 Engrave Area: 400mm x 430m Available Laser Modules: 20W Model – Laser Power: 5000-5500 MW Laser Engraver and Cutter Kit
BDT 41,000.00
BDT 41,000.00 tax incl.
BDT 41,000.00 tax excl.
BDT 41,000.00 tax excl.
BDT 41,000.00 tax incl.
BDT 41,000.00 tax incl.
BDT 0.00 Tax
BDT 41,000.00 tax excl.
BDT 41,000.00 tax excl.
BDT 0.00 Tax
BDT 41,000.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0267

Big Easy Driver - Stepper Motor Driver

(0)
Bi-polar Microstepping Driver 2A/Phase Max 1.4-1.7A/Phase w/o Heatsink Max Motor Drive Voltage: 30V On-board 5V/3.3V Regulation Low RDS(ON) outputs Automatic current decay mode detection/selection Mixed and Slow current decay modes Synchronous rectification for low power dissipation Internal UVLO Crossover-current protection 3.3 and 5 V compatible logic...
BDT 1,600.00
BDT 1,600.00 tax incl.
BDT 1,600.00 tax excl.
BDT 1,600.00 tax excl.
BDT 1,600.00 tax incl.
BDT 1,600.00 tax incl.
BDT 0.00 Tax
BDT 1,600.00 tax excl.
BDT 1,600.00 tax excl.
BDT 0.00 Tax
BDT 1,600.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0094

Arduino Uno R3

(0)
The Arduino Uno R3 High-Quality Edition Arduino UNO in Bangladesh Micro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6. The Arduino Uno R3 High-Quality Edition embodies superior craftsmanship and meticulous attention to detail, resulting in...
BDT 1,050.00
BDT 1,050.00 tax incl.
BDT 1,050.00 tax excl.
BDT 1,050.00 tax excl.
BDT 1,050.00 tax incl.
BDT 1,050.00 tax incl.
BDT 0.00 Tax
BDT 1,050.00 tax excl.
BDT 1,050.00 tax excl.
BDT 0.00 Tax
BDT 1,050.00 tax incl.
More
In-Stock
In stock: 163

Reference: RBD-2038

CR-Laser Falcon Laser Engraver (10W)

(0)
 0.06mm Compressed Spot for Engraving  Stronger to Cut and Engrave  Engrave with Less Hassle  400*415 Larger Workspace  Able to Engrave and Cut Various Materials  Extensive Compatibility with Multiple Software, File Format and Operating System  All-around Safety Protections  User-friendly Designs
BDT 68,950.00
BDT 68,950.00 tax incl.
BDT 68,950.00 tax excl.
BDT 68,950.00 tax excl.
BDT 68,950.00 tax incl.
BDT 68,950.00 tax incl.
BDT 0.00 Tax
BDT 68,950.00 tax excl.
BDT 68,950.00 tax excl.
BDT 0.00 Tax
BDT 68,950.00 tax incl.
More
Out-of-Stock
In stock: -1

Reference: RBD-1333

Button Keypad 3x4 module (Assembled)

(0)
Easy communication with any microcontroller. Tactile type switches. Over 1,000,000 operations per key. Contact rated for 12V dc @ 20mA. Over 1,000,000 operations per key. Dimensions: 56 x 80 x 17 mm.(LxWxH)
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
Out-of-Stock
In stock: -1

Reference: RBD-0323

Arduino Uno R3 SMD

(0)
Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital I / O Pins 14 (of which 6 provide PWM output) RoboticsBD Analog Input Pins: 6 A programming cable is included.
BDT 574.00
BDT 574.00 tax incl.
BDT 574.00 tax excl.
BDT 574.00 tax excl.
BDT 574.00 tax incl.
BDT 574.00 tax incl.
BDT 0.00 Tax
BDT 574.00 tax excl.
BDT 574.00 tax excl.
BDT 0.00 Tax
BDT 574.00 tax incl.
More
In-Stock
In stock: 151

Reference: RBD-0289

16 Channel 12 bit PWM / Servo Driver I2C interface PCA9685

(0)
Adjustable frequency PWM up to about 1.6 KHz 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate Configurable push-pull or an open-drain output The output enable pin to quickly disable all the outputs Terminal block for power input Reverse polarity protection on the terminal block input Green power-good LED
BDT 525.00 BDT 680.00
BDT 680.00 BDT 525.00 tax incl.
BDT 680.00 BDT 525.00 tax excl.
BDT 680.00 BDT 525.00 tax excl.
BDT 680.00 BDT 525.00 tax incl.
BDT 680.00 BDT 525.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 680.00 BDT 525.00 tax excl.
BDT 680.00 BDT 525.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 680.00 BDT 525.00 tax incl.
More
In-Stock
In stock: 50

Reference: RBD-2335

Arduino Uno R3

(0)
The Arduino Uno R3 Standard-Quality Edition Micro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6 We are pleased to present a more cost-effective version of the Arduino Uno R3, a widely acclaimed and versatile platform for electronics...
BDT 710.00
BDT 710.00 tax incl.
BDT 710.00 tax excl.
BDT 710.00 tax excl.
BDT 710.00 tax incl.
BDT 710.00 tax incl.
BDT 0.00 Tax
BDT 710.00 tax excl.
BDT 710.00 tax excl.
BDT 0.00 Tax
BDT 710.00 tax incl.
More
In-Stock
In stock: 465

Reference: RBD-1312

Makeblock XY-Plotter Robot Kit V2

(0)
XY plotter robot kit is a drawing robot Supports Pen and Pencil Supports Laser Engraving
BDT 25,800.00
BDT 25,800.00 tax incl.
BDT 25,800.00 tax excl.
BDT 25,800.00 tax excl.
BDT 25,800.00 tax incl.
BDT 25,800.00 tax incl.
BDT 0.00 Tax
BDT 25,800.00 tax excl.
BDT 25,800.00 tax excl.
BDT 0.00 Tax
BDT 25,800.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0986

4x4 Keypad - 16 Key - Matrix Membrane Type

(0)
Ultra-thin design & adhesive backing provides easy integration to any project. Excellent price-performance ratio. Easy communication with any microcontroller 5 pins 2.54mm pitch connector, 4x 4type 16 keys. Sticker can peel off for adhesive mounting.
BDT 70.00
BDT 70.00 tax incl.
BDT 70.00 tax excl.
BDT 70.00 tax excl.
BDT 70.00 tax incl.
BDT 70.00 tax incl.
BDT 0.00 Tax
BDT 70.00 tax excl.
BDT 70.00 tax excl.
BDT 0.00 Tax
BDT 70.00 tax incl.
More
In-Stock
In stock: 216

Reference: RBD-0306

Torobot 32 Channel USB UART Servo Motor Controller

(0)
Baud rate (USB): 115200 Baud rate (bluetooth, UART): 9600 Storage Flash capacity: 16M Mode to choose: 4 types Simultaneous controlling servo number: 32 channel Max action groups: 256 groups Communication agreement: UART Cross platform operation, can support WindowsXP, WindowsVisit, Windows7, Windows8, Windows10, Linux,FreeBsd, MAC OS, Android
BDT 4,400.00
BDT 4,400.00 tax incl.
BDT 4,400.00 tax excl.
BDT 4,400.00 tax excl.
BDT 4,400.00 tax incl.
BDT 4,400.00 tax incl.
BDT 0.00 Tax
BDT 4,400.00 tax excl.
BDT 4,400.00 tax excl.
BDT 0.00 Tax
BDT 4,400.00 tax incl.
More
In-Stock
In stock: 12

Reference: RBD-0402

3×4 Flexible Keypad

(0)
Ultra-thin design & adhesive backing provides easy integration to any project Excellent price-performance ratio Easy communication with any microcontroller 5 pins 2.54mm pitch connector, 4x 4type 16 keys. Sticker can peel off for adhesive mounting. RoboticsBD Operating Voltage (V): 12 DC 
BDT 95.00
BDT 95.00 tax incl.
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 95.00 tax incl.
BDT 95.00 tax incl.
BDT 0.00 Tax
BDT 95.00 tax excl.
BDT 95.00 tax excl.
BDT 0.00 Tax
BDT 95.00 tax incl.
More
In-Stock
In stock: 94

Reference: RBD-0376

L298N H-Bridge Dual Motor Driver, Stepper Motor Driver

(0)
Current Sense for each motor. RoboticsBD Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes
BDT 195.00
BDT 195.00 tax incl.
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 195.00 tax incl.
BDT 195.00 tax incl.
BDT 0.00 Tax
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 0.00 Tax
BDT 195.00 tax incl.
More
In Stock
In stock: 428

Reference: RBD-0009

Arduino Mega 2560 R3

(0)
54 Digital I/O terminals (14 of which have programmable PWM outputs). 16 Analog Inputs. 4 UARTs (hardware serial ports). 16 MHz crystal clock. RoboticsBD Operating voltage: 6 ~ 12v. Dimensions: 110 x 53 x 15 mm.
BDT 1,895.00
BDT 1,895.00 tax incl.
BDT 1,895.00 tax excl.
BDT 1,895.00 tax excl.
BDT 1,895.00 tax incl.
BDT 1,895.00 tax incl.
BDT 0.00 Tax
BDT 1,895.00 tax excl.
BDT 1,895.00 tax excl.
BDT 0.00 Tax
BDT 1,895.00 tax incl.
More
In-Stock
In stock: 35

Reference: RBD-1397

Arduino Mega 2560 CH340

(0)
Programmer: CH340 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 256 KB of which 8 KB used by bootloader
BDT 1,345.00
BDT 1,345.00 tax incl.
BDT 1,345.00 tax excl.
BDT 1,345.00 tax excl.
BDT 1,345.00 tax incl.
BDT 1,345.00 tax incl.
BDT 0.00 Tax
BDT 1,345.00 tax excl.
BDT 1,345.00 tax excl.
BDT 0.00 Tax
BDT 1,345.00 tax incl.
More
In-Stock
In stock: 65

Reference: RBD-0377

Monster Moto Shield Dual VNH2SP30 Motor Driver Module 30A

(0)
Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD
BDT 6,650.00
BDT 6,650.00 tax incl.
BDT 6,650.00 tax excl.
BDT 6,650.00 tax excl.
BDT 6,650.00 tax incl.
BDT 6,650.00 tax incl.
BDT 0.00 Tax
BDT 6,650.00 tax excl.
BDT 6,650.00 tax excl.
BDT 0.00 Tax
BDT 6,650.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-0159

LCD Keypad Shield for Arduino

(0)
Provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 6 keys select, up, right, down, left and reset. To save the digital IO pins, the keypad interface only uses one ADC channel. The key value is read out through a 5 stage voltage...
BDT 550.00
BDT 550.00 tax incl.
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 550.00 tax incl.
BDT 550.00 tax incl.
BDT 0.00 Tax
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 0.00 Tax
BDT 550.00 tax incl.
More
In-Stock
In stock: 33

Reference: RBD-2151

JoyStick Shield Module Robotics Control

(0)
2-Axis joystick Bluetooth / Serial interface I2C interface nRF24L01 interface Nokia 5110 LCD interface Interface connector Power switch to switch between 3.3 and 5V
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-1214

Mini Mega 2560 PRO (Embed) CH340G/ATmega2560-16AU

(0)
The board is compatible with Mega 2560.  excellent solution for developing projects based on ATmega2560. The board can be powered directly through the Micro USB connector The maximum output current upon 5V is around 800mA, while on the 3.3V it is about 800mA.
BDT 1,590.00
BDT 1,590.00 tax incl.
BDT 1,590.00 tax excl.
BDT 1,590.00 tax excl.
BDT 1,590.00 tax incl.
BDT 1,590.00 tax incl.
BDT 0.00 Tax
BDT 1,590.00 tax excl.
BDT 1,590.00 tax excl.
BDT 0.00 Tax
BDT 1,590.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-0392

Ardumoto Shield L298P Motor Driver

(0)
L298P based Arduino motor driver shield Forward, Backward steering indicators Can Drive 2 DC Motors Up to 2A of Maximum Current. RoboticsBD
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 13

Reference: RBD-1573

Five-Way Navigation Button Module 5D Joystick Independent Keyboard Switch Button Single Chip

(0)
Supports up/down/left/right/middle with extra set and reset button 2V-9V wide working voltage The number of IO: 7 Operating temperature: -40℃ to 85℃ Size: 4×2.5cm
BDT 124.00
BDT 124.00 tax incl.
BDT 124.00 tax excl.
BDT 124.00 tax excl.
BDT 124.00 tax incl.
BDT 124.00 tax incl.
BDT 0.00 Tax
BDT 124.00 tax excl.
BDT 124.00 tax excl.
BDT 0.00 Tax
BDT 124.00 tax incl.
More
In-Stock
In stock: 27

Reference: RBD-0434

DRV8825 Stepper Motor Driver Module

(0)
Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm. RoboticsBD
BDT 230.00
BDT 230.00 tax incl.
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 230.00 tax incl.
BDT 230.00 tax incl.
BDT 0.00 Tax
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 0.00 Tax
BDT 230.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-0032

Arduino Nano

(0)
USB Driver: CH340 Operating Voltage (logic level): 5V With Mini USB 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please select...
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In-Stock
In stock: 549

Reference: RBD-0926

Arduino Nano R3

(0)
USB Driver: FT232 Manufacturer: Gravitech Operating Voltage (logic level): 5V 8 analog inputs ports: A0 ~ A7 14 Digital input / output ports: TX, RX, D2 ~ D13 1 pair of TTL level serial transceiver ports RX / TX Using Atmel Atmega328P-AU MCU There is a bootloader installed in it Standard 0.1” spacing DIP (breadboard friendly). Manual reset switch. Please...
BDT 690.00
BDT 690.00 tax incl.
BDT 690.00 tax excl.
BDT 690.00 tax excl.
BDT 690.00 tax incl.
BDT 690.00 tax incl.
BDT 0.00 Tax
BDT 690.00 tax excl.
BDT 690.00 tax excl.
BDT 0.00 Tax
BDT 690.00 tax incl.
More
In-Stock
In stock: 32

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

(0)
Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 65

Reference: RBD-0393

JoyStick 5Pin Breakout Module For Arduino

(0)
Dimensions: 40 x 27 x 15 (LxWxH) mm. RoboticsBD Weight: 10gm (without Hat). 2.54mm pin interface leads. Operating Voltage: 5V. Long service life and stable performance. Standard interface and electronic building blocks. Widely use in Arduino DIY projects. RoboticsBD
BDT 88.00
BDT 88.00 tax incl.
BDT 88.00 tax excl.
BDT 88.00 tax excl.
BDT 88.00 tax incl.
BDT 88.00 tax incl.
BDT 0.00 Tax
BDT 88.00 tax excl.
BDT 88.00 tax excl.
BDT 0.00 Tax
BDT 88.00 tax incl.
More
In-Stock
In stock: 100

Reference: RBD-2199

NANO V3.0 Upgraded MH-Tiny ATTINY88 Micro Development Board 16MHz

(0)
Compatible with the Arduino IDE, making it easy for beginners to start using Smaller and cheaper than traditional Arduino boards Powered by a 16.0 MHz microcontroller Fully assembled except for headers, allowing for easy soldering Great for projects where size and cost are a concern Perfect for beginners to jump into electronics Can be used for a variety...
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 17

Reference: RBD-2119

22 inch 10 Touch Points IR Touch Screen/IR Touch Panel, IR Touch Frame, IR Touch Overlay Kit

(0)
Interface Type: USB Glass: With Glass Response Time: less than 15ms Size: 22 inch, 10 Touch Point **The product is only available for in-store pickup, we do not ship this product as it is a fragile item. **Product Images are shown for illustrative purposes only and may differ from the actual product.
BDT 11,520.00
BDT 11,520.00 tax incl.
BDT 11,520.00 tax excl.
BDT 11,520.00 tax excl.
BDT 11,520.00 tax incl.
BDT 11,520.00 tax incl.
BDT 0.00 Tax
BDT 11,520.00 tax excl.
BDT 11,520.00 tax excl.
BDT 0.00 Tax
BDT 11,520.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0557

30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Module For Arduino

(0)
Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD
BDT 2,750.00
BDT 2,750.00 tax incl.
BDT 2,750.00 tax excl.
BDT 2,750.00 tax excl.
BDT 2,750.00 tax incl.
BDT 2,750.00 tax incl.
BDT 0.00 Tax
BDT 2,750.00 tax excl.
BDT 2,750.00 tax excl.
BDT 0.00 Tax
BDT 2,750.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-2118

27 inch 10 Touch Points IR Touch Screen/IR Touch Panel, IR Touch Frame, IR Touch Overlay Kit

(0)
Interface Type: USB Glass: With Glass Response Time: less than 15ms Size: 27 inch, 10 Touch Point **The product is only available for in-store pickup, we do not ship this product as it is a fragile item. **Product Images are shown for illustrative purposes only and may differ from the actual product.
BDT 14,520.00
BDT 14,520.00 tax incl.
BDT 14,520.00 tax excl.
BDT 14,520.00 tax excl.
BDT 14,520.00 tax incl.
BDT 14,520.00 tax incl.
BDT 0.00 Tax
BDT 14,520.00 tax excl.
BDT 14,520.00 tax excl.
BDT 0.00 Tax
BDT 14,520.00 tax incl.
More
Last items in stock
In stock: 1

Follow us on Facebook