Home

  • Banner

Active filters
  • Categories: 3D Printed
  • Categories: 3D Printer
  • Categories: Motor
  • Categories: Power Module & Adapter
Analog Feedback Servo MG996R Quick view

Reference: RBD-0297

Analog Feedback Servo MG996R

(0)
Weight: 55g Dimension: 40.7×19.7×42.9mm Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v) Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v) Operating voltage: 4.8 ~ 6.6V Gear Type: Metal gear Dead band width: 1us Wire length: 32cm
BDT 1,200.00
BDT 1,200.00 tax incl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax incl.
BDT 1,200.00 tax incl.
BDT 0.00 Tax
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 0.00 Tax
BDT 1,200.00 tax incl.
More
Last items in stock
In stock: 3
Jumper Wire housing 3 Pin Robotics Bangladesh Quick view

Reference: RBD-0251

Jumper Wire housing 3 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 3 jumper wires (3-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 9
Out-of-Stock Flexible TPU Filament Plastic For 3D Printer 1. Quick view

Reference: 1391

Flexible TPU Filament Plastic For 3D Printer 1.75mm1KG/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 3,540.00
BDT 3,540.00 tax incl.
BDT 3,540.00 tax excl.
BDT 3,540.00 tax excl.
BDT 3,540.00 tax incl.
BDT 3,540.00 tax incl.
BDT 0.00 Tax
BDT 3,540.00 tax excl.
BDT 3,540.00 tax excl.
BDT 0.00 Tax
BDT 3,540.00 tax incl.
More
Out-of-Stock
In stock: -10
Red White
On sale! JF-0530B Pull Push Type Electric Solenoid Electromagnet 10mm 5N DC12V Quick view

Reference: RBD-0432

JF-0530B Pull Push Type Electric Solenoid Electromagnet 10mm 5N DC12V

(0)
Iron Body Material High quality ultra-compact electric lock. RoboticsBD Rustproof, durable, safe, convenient to use. Suction which tightly sucks the iron, thus locking the door. Designed with the open frame type and mount board, high power. Easy to install for the electric door lock or other automatic door lock systems with the mounting board Applicable...
BDT 590.00
BDT 590.00 tax incl.
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 590.00 tax incl.
BDT 590.00 tax incl.
BDT 0.00 Tax
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 0.00 Tax
BDT 590.00 tax incl.
More
In-Stock
In stock: 13
XL4015 DC-DC Step Down Adjustable Power Supply Module 5A Max Quick view

Reference: RBD-0395

XL4015 DC-DC Step Down Adjustable Power Supply Module 5A Max

(0)
Input voltage range: 4V-38V DC Output voltage range: 1.25V-36V DC adjustable. Output current: 0-5A. Output power: 75W. High efficiency up to 96% The built-in thermal shutdown function Built-in current limit function In-Built output short protection function. RoboticsBD
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 34
Jumper Wire housing 5 Pin Robotics Bangladesh Quick view

Reference: RBD-0260

Jumper Wire housing 5 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 5 jumper wires (5-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 9
Out-of-Stock PETG Filament Plastic For 3D Printer 1. Quick view

Reference: 1392

PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll

(0)
PETG Filament Plastic For 3D Printer 1.75mm1KG/Roll Compatible with Anycubic, Creality. Temperature: 205-230 °C Bed Temperature: 60-80 °C
BDT 3,640.00
BDT 3,640.00 tax incl.
BDT 3,640.00 tax excl.
BDT 3,640.00 tax excl.
BDT 3,640.00 tax incl.
BDT 3,640.00 tax incl.
BDT 0.00 Tax
BDT 3,640.00 tax excl.
BDT 3,640.00 tax excl.
BDT 0.00 Tax
BDT 3,640.00 tax incl.
More
Out-of-Stock
In stock: 0
Red Black Blue White
High Torque Gear Motor 12V 100RPM 25GA Quick view

Reference: RBD-0715

High Torque Gear Motor 12V 100RPM 25GA

(0)
Voltage: 12V DC RPM:100RPM Diameter: 25mm Low Noise Shaft equips metal bushes for long life. Metal Gears for High performance It comes with High-Quality gears. High torque at very low Current Consumptions
BDT 850.00
BDT 850.00 tax incl.
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 850.00 tax incl.
BDT 850.00 tax incl.
BDT 0.00 Tax
BDT 850.00 tax excl.
BDT 850.00 tax excl.
BDT 0.00 Tax
BDT 850.00 tax incl.
More
In-Stock
In stock: 31
Battery 9V Robotics Bangladesh Quick view

Reference: RBD-0652

Battery 9V

(0)
Constant 9V Output till lasts Metal Jacket Body Good Built Quality and hence Leakproof Easy to install and Replace Corrosion free Connector Point for long-term use 0% Mercury and Cadmium. Environment-friendly OEM Compatible. RoboticsBD
BDT 74.00
BDT 74.00 tax incl.
BDT 74.00 tax excl.
BDT 74.00 tax excl.
BDT 74.00 tax incl.
BDT 74.00 tax incl.
BDT 0.00 Tax
BDT 74.00 tax excl.
BDT 74.00 tax excl.
BDT 0.00 Tax
BDT 74.00 tax incl.
More
In-Stock
In stock: 178
Jumper Wire housing 6 Pin Robotics Bangladesh Quick view

Reference: RBD-0262

Jumper Wire housing 6 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 6 jumper wires (6-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 20.00
BDT 20.00 tax incl.
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 20.00 tax incl.
BDT 20.00 tax incl.
BDT 0.00 Tax
BDT 20.00 tax excl.
BDT 20.00 tax excl.
BDT 0.00 Tax
BDT 20.00 tax incl.
More
In-Stock
In stock: 5
Out-of-Stock TPU Filament Plastic For 3D Printer 1. Quick view

Reference: 1317

TPU Filament Plastic For 3D Printer 1.75mm 500g/Roll

(0)
TPU rubber based Material. Very flexible and elastic. Shore A Hardness at 87A. Tensile Strength 52 MPa.
BDT 2,300.00
BDT 2,300.00 tax incl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax incl.
BDT 2,300.00 tax incl.
BDT 0.00 Tax
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 0.00 Tax
BDT 2,300.00 tax incl.
More
Out-of-Stock
In stock: -9
Black White
Mini Cooling Fan 12V DC Quick view

Reference: RBD-0727

12V Mini Cooling Fan 40x40x10mm

(0)
Operating Voltage: 12VDC Power Consumption: 1.42 W Body and Blade Constructed from Thermoplastic PBT of UL 94V-0 Single Phase 4 Pole Brushless DC Motor Precise Vapo Bearing Counterclockwise Rotation Direction if Viewed from front of Fan Blade
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In-Stock
In stock: 95
HW-411A LM2596 DC-DC Step Down Adjustable Power Supply Module 3A Max Buck Converter Robotics Bangladesh Quick view

Reference: RBD-0406

HW-411A LM2596 DC-DC Step Down Adjustable Power Supply Module 3A Max Buck Converter

(0)
Input voltage: 4.5-35V, Output voltage: (3-35V) continuously adjustable (recommended load debugging). Minimum pressure: 1.5V Output current: rated current 2A, 3A maximum Output Power: 15W maximum. RoboticsBD
BDT 99.00
BDT 99.00 tax incl.
BDT 99.00 tax excl.
BDT 99.00 tax excl.
BDT 99.00 tax incl.
BDT 99.00 tax incl.
BDT 0.00 Tax
BDT 99.00 tax excl.
BDT 99.00 tax excl.
BDT 0.00 Tax
BDT 99.00 tax incl.
More
In-Stock
In stock: 351
Jumper Wire housing 7 Pin Robotics Bangladesh Quick view

Reference: RBD-0263

Jumper Wire housing 7 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 7 jumper wires (7-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 5
Out-of-Stock Colored UV Resin 500mL Black Robotics Bangladesh Quick view

Reference: RBD-1386

Brand: Anycubic

Colored UV Resin 500mL Black

(0)
Wavelength(nm): 395-405 Color: Black Density(g/m^3): 1.08-1.13 Hardness(Shore D):79.0 Tensile Strength(MPa): 46-67 Elongation at Break(%):28-35
BDT 2,990.00
BDT 2,990.00 tax incl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax incl.
BDT 2,990.00 tax incl.
BDT 0.00 Tax
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 0.00 Tax
BDT 2,990.00 tax incl.
More
Out-of-Stock
In stock: 0
2pcs 7x20mm Coreless Motor (with 55mm Propeller) Quick view

Reference: RBD-0736

7x20mm Coreless Motor with 55mm Propeller Pair

(0)
Model: 720 Shaft Size: 1.0 mm Rated Voltage: 3.7 V. Current: 0.1 A. Rated RPM: 48000. Max Speed: 50000 RPM. Wire Length: 5cm Prop. Length: 55mm
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 97
Boost Module Quick view

Reference: RBD-0730

DC-DC Boost Module

(0)
The performance is much higher than LM2577. Non-isolated Boost converter. It has a non-synchronous rectifier. Low ultra wide input voltage 3 v ~ 32 v, the best is 5 ~ 32 v working voltage range; Low ultra wide output voltage 5 v ~ 35 v;
BDT 130.00
BDT 130.00 tax incl.
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 130.00 tax incl.
BDT 130.00 tax incl.
BDT 0.00 Tax
BDT 130.00 tax excl.
BDT 130.00 tax excl.
BDT 0.00 Tax
BDT 130.00 tax incl.
More
In-Stock
In stock: 164
Jumper Wire housing 8 Pin Robotics Bangladesh Quick view

Reference: RBD-0269

Jumper Wire housing 8 Pin

(0)
Tidy up your workspace and organize your jumper wires with this handy 3D printed housing for Dupont connectors. Securely holds up to 8 jumper wires (8-pin) for easy access and strain relief. No soldering required - simply snap the connector housings into place. Compatible with Arduino, Raspberry Pi, sensors, LED strips, and various DIY electronics projects.
BDT 25.00
BDT 25.00 tax incl.
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 25.00 tax incl.
BDT 25.00 tax incl.
BDT 0.00 Tax
BDT 25.00 tax excl.
BDT 25.00 tax excl.
BDT 0.00 Tax
BDT 25.00 tax incl.
More
In-Stock
In stock: 8
3D Scanner Laser Desktop- DIY Red Robotics Bangladesh Quick view

Reference: RBD-1227

3D Scanner Laser Desktop- DIY Red

(0)
Object Scanning Device with USB 2.0 Interface / CMOS Sensor
BDT 18,999.00
BDT 18,999.00 tax incl.
BDT 18,999.00 tax excl.
BDT 18,999.00 tax excl.
BDT 18,999.00 tax incl.
BDT 18,999.00 tax incl.
BDT 0.00 Tax
BDT 18,999.00 tax excl.
BDT 18,999.00 tax excl.
BDT 0.00 Tax
BDT 18,999.00 tax incl.
More
Last items in stock
In stock: 2
TP4056 Lithium Battery Charger Module With Protection Dual Functions Quick view

Reference: RBD-0919

TP4056 Lithium Battery Charger Module With Protection Dual Functions

(0)
Dimension: 25 x 19 x 10 (LxWxH)mm. Input interface: micro USB. Current Protection: Yes Charging mode: Linear charging. Current: 1A adjustable. Charge precision: 1.5%. Input voltage: 4.5V-5.5V. Full charge voltage: 4.2V.
BDT 38.00
BDT 38.00 tax incl.
BDT 38.00 tax excl.
BDT 38.00 tax excl.
BDT 38.00 tax incl.
BDT 38.00 tax incl.
BDT 0.00 Tax
BDT 38.00 tax excl.
BDT 38.00 tax excl.
BDT 0.00 Tax
BDT 38.00 tax incl.
More
In-Stock
In stock: 838
85mm Antiskid Shockproof Wheels, Smart Car Robot Tires with 37GB Motor Quick view

Reference: RBD-0750

85mm Antiskid Shockproof Wheels, Smart Car Robot Tires with 37GB Motor

(0)
Tire with sponge liner for more strength With upgraded tire tread for greater friction New design wheel for better combination with the motor Diameter: 85 mm Width : 38 mm The material of Wheel: High-strength plastic The material of Tyre: Rubber Color: Black Tyre + Blue Rim
BDT 2,350.00
BDT 2,350.00 tax incl.
BDT 2,350.00 tax excl.
BDT 2,350.00 tax excl.
BDT 2,350.00 tax incl.
BDT 2,350.00 tax incl.
BDT 0.00 Tax
BDT 2,350.00 tax excl.
BDT 2,350.00 tax excl.
BDT 0.00 Tax
BDT 2,350.00 tax incl.
More
Last items in stock
In stock: 1
Jumper Wire housing 4Pin Robotics Bangladesh Quick view

Reference: RBD-1681

Jumper Wire housing 4Pin

(0)
3D printed Dupont connector for Jumper cable 4pin
BDT 60.00
BDT 60.00 tax incl.
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 60.00 tax incl.
BDT 60.00 tax incl.
BDT 0.00 Tax
BDT 60.00 tax excl.
BDT 60.00 tax excl.
BDT 0.00 Tax
BDT 60.00 tax incl.
More
In-Stock
In stock: 17
KEWEISI KWS-10VA USB TESTER AMMETER-VOLTMETER Quick view

Reference: RBD-0963

KEWEISI KWS-10VA USB TESTER AMMETER-VOLTMETER

(0)
Current and voltage display in turn, easy and comfortable to use. Small and portable, do not need other power supply. Measuring range: DC 3V – 9V / 0 – 3A (up to 5A ) Portable Device Interface: USB2.0, USB3.0 Product Weight: 0.025 kg Two output ports
BDT 360.00
BDT 360.00 tax incl.
BDT 360.00 tax excl.
BDT 360.00 tax excl.
BDT 360.00 tax incl.
BDT 360.00 tax incl.
BDT 0.00 Tax
BDT 360.00 tax excl.
BDT 360.00 tax excl.
BDT 0.00 Tax
BDT 360.00 tax incl.
More
In-Stock
In stock: 4
Nema 23 23HS5628 Stepper Motor Quick view

Reference: RBD-0817

Nema 23 23HS5628 Stepper Motor

(0)
Step Angle Step Angle: 1.8 ° Current: 2.8 A/Phase Holding Torque: 10.1 N-cm Detent torque: 3.6 N.cm (Maximum) Lead Wires: 4 Shaft diameter: 8.00 mm
BDT 2,990.00
BDT 2,990.00 tax incl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 2,990.00 tax incl.
BDT 2,990.00 tax incl.
BDT 0.00 Tax
BDT 2,990.00 tax excl.
BDT 2,990.00 tax excl.
BDT 0.00 Tax
BDT 2,990.00 tax incl.
More
In-Stock
In stock: 20
3D Printer Nozzle M7 Thread Brass 1. Quick view

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 28
- BDT 15.00 Reduced price 18650 Battery Holder 3S with wire Quick view

Reference: RBD-0988

18650 Battery Holder 3S with wire

(0)
Hold 3 standard 18650 batteries. Wire Length: 15 cm. Output: 11.1 V. Dimension (Appro.) : 76 x 60 x 18 mm. Weight: 18 gm. High-quality plastic material
BDT 75.00 BDT 90.00
BDT 90.00 BDT 75.00 tax incl.
BDT 90.00 BDT 75.00 tax excl.
BDT 90.00 BDT 75.00 tax excl.
BDT 90.00 BDT 75.00 tax incl.
BDT 90.00 BDT 75.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 90.00 BDT 75.00 tax excl.
BDT 90.00 BDT 75.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 90.00 BDT 75.00 tax incl.
More
In-Stock
In stock: 350
LDX-218 Servo Motor Quick view

Reference: RBD-0818

LDX-218 Servo Motor

(0)
17kg large torque. 15 kg·cm (208 oz·in) @6V 17 kg·cm (236 oz·in) @7.4V Full metal gear 180 degree rotation Using high-precision potentiometer with new design Convenient plug-in wire
BDT 2,490.00
BDT 2,490.00 tax incl.
BDT 2,490.00 tax excl.
BDT 2,490.00 tax excl.
BDT 2,490.00 tax incl.
BDT 2,490.00 tax incl.
BDT 0.00 Tax
BDT 2,490.00 tax excl.
BDT 2,490.00 tax excl.
BDT 0.00 Tax
BDT 2,490.00 tax incl.
More
In-Stock
In stock: 18
4 DOF High Precision 3D-Printed Stepper Motor Robotic Arm Robotics Bangladesh Quick view

Reference: RBD-2534

4 DOF High Precision 3D-Printed Stepper Motor Robotic Arm

(0)
3D-printed robotic arm with 4 stepper motors and 1 servo motor for precise control Robot arm size: approximately 25 x 13 x 29 cm Features claws for easy gripping Includes all necessary 3D-printed parts and motors The color and claw mechanism of the Robotic arm  may vary as our stock rotates. Current stock comes as assembled. 
BDT 13,499.00
BDT 13,499.00 tax incl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 13,499.00 tax incl.
BDT 13,499.00 tax incl.
BDT 0.00 Tax
BDT 13,499.00 tax excl.
BDT 13,499.00 tax excl.
BDT 0.00 Tax
BDT 13,499.00 tax incl.
More
Last items in stock
In stock: 1
18650 Battery Holder – 1 Cell Quick view

Reference: RBD-0989

18650 Battery Holder – 1 Cell

(0)
Hold A standard 18650 batteries Wire : 15cm Output: 3.7v Dimension (Appro.): 76x20x20xmm Weight: 8gm High-quality plastic material
BDT 40.00
BDT 40.00 tax incl.
BDT 40.00 tax excl.
BDT 40.00 tax excl.
BDT 40.00 tax incl.
BDT 40.00 tax incl.
BDT 0.00 Tax
BDT 40.00 tax excl.
BDT 40.00 tax excl.
BDT 0.00 Tax
BDT 40.00 tax incl.
More
In-Stock
In stock: 135
LewanSoul LDX-227 Servo Quick view

Reference: RBD-0819

Hiwonder LDX-227 Servo

(0)
17kg large torque. 15 kg·cm (208 oz·in) @6V 17 kg·cm (236 oz·in) @7.4V Full metal gear 270 degree rotation Using high-precision potentiometer with new design Convenient plug-in wire
BDT 2,250.00
BDT 2,250.00 tax incl.
BDT 2,250.00 tax excl.
BDT 2,250.00 tax excl.
BDT 2,250.00 tax incl.
BDT 2,250.00 tax incl.
BDT 0.00 Tax
BDT 2,250.00 tax excl.
BDT 2,250.00 tax excl.
BDT 0.00 Tax
BDT 2,250.00 tax incl.
More
In-Stock
In stock: 20
US-015 Ultrasonic Module Housing Robotics Bangladesh Quick view

Reference: RBD-2695

US-015 Ultrasonic Module Housing

(0)
Custom 3D-printed enclosure designed specifically for the US-015 ultrasonic sensor module. Protects the sensor from dust, moisture, and impacts for enhanced durability and performance. Features two screw holes for convenient and secure mounting in various projects. Note: Filament Color may change as our stock rotates. 
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 4
Raspberry Pi Power Adapter with Switch Micro USB Robotics Bangladesh Quick view

Reference: RBD-1309

Raspberry Pi Power Adapter with Switch Micro USB

(0)
Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz. Input current (mA): 100. Output Power: 5V 3A. Load regulation (%): ±5. Input Plug: 2-Pin EU type. Output Plug: Micro USB Plug. Compatible with: Raspberry Pi B+, 2, 2B, 2B+,3 ,3B+, Zero, Zero W. It has a switch so you can easily power off the device without having to unplug it right from the socket.
BDT 525.00
BDT 525.00 tax incl.
BDT 525.00 tax excl.
BDT 525.00 tax excl.
BDT 525.00 tax incl.
BDT 525.00 tax incl.
BDT 0.00 Tax
BDT 525.00 tax excl.
BDT 525.00 tax excl.
BDT 0.00 Tax
BDT 525.00 tax incl.
More
In-Stock
In stock: 27
Back to top

Follow us on Facebook

Facebook