• Banner

Active filters
  • Availability: In stock
  • Categories: 3D Printer
  • Categories: Arduino Shield & Module
  • Categories: Motor Driver
  • Categories: Thermal Printer

Reference: RBD-2369

LSC-6: Hiwonder 6 CH Bluetooth 4.0 Servo Controller Module for Robotics Arm

(0)
Built-in power switch High-performance CPU 16M high-capacity memory Built in Bluetooth 4.0 module Support TTL serial communication
BDT 5,980.00
BDT 5,980.00 tax incl.
BDT 5,980.00 tax excl.
BDT 5,980.00 tax excl.
BDT 5,980.00 tax incl.
BDT 5,980.00 tax incl.
BDT 0.00 Tax
BDT 5,980.00 tax excl.
BDT 5,980.00 tax excl.
BDT 0.00 Tax
BDT 5,980.00 tax incl.
More
In stock
In stock: 10

Reference: RBD-0443

GPRS GSM SIM900 Arduino Shield

(0)
Based on SIMCom‘s SIM900 Module Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. Control by AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
BDT 2,400.00
BDT 2,400.00 tax incl.
BDT 2,400.00 tax excl.
BDT 2,400.00 tax excl.
BDT 2,400.00 tax incl.
BDT 2,400.00 tax incl.
BDT 0.00 Tax
BDT 2,400.00 tax excl.
BDT 2,400.00 tax excl.
BDT 0.00 Tax
BDT 2,400.00 tax incl.
More
In-Stock
In stock: 22

Reference: RBD-2389

L298N Dual H-Bridge Motor Driver Module

(0)
This module is ideally suited to motor control to your project. This is the L298N Dual H-Bridge module which allows you to build in 2 controlled motors to your projects, controlling the speed with current. This can be used with a wide range of microcontrollers including Arduino and Raspberry Pi.
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In stock
In stock: 8

Reference: RBD-0189

Brand: DFRobot

Xbee Shield for Arduino (without Xbee)

(0)
Xbee Shield for Arduino (without Xbee) INTRODUCTION: The XBee Expansion Board is a compliant solution designed to meet low-cost, low-power wireless sensor networks with special needs.The module is easy to use, low power consumption, and the provision of critical data between devices reliable transmission.
BDT 1,200.00
BDT 1,200.00 tax incl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax incl.
BDT 1,200.00 tax incl.
BDT 0.00 Tax
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 0.00 Tax
BDT 1,200.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-2390

L298N PCB Driver Module Quad High-Power 4-Channel Smart Auto Motor Driving Board

(0)
Forward and reverse rotating :Forward and reverse rotating motor can be realized, can meet the needs of various working scenarios. Good production performance :Excellent production technology, not easy to cold joint, reliable and safe for you to use. Multiple good ability :With characteristics of strong driving ability, low heat dissipation and strong...
BDT 1,200.00
BDT 1,200.00 tax incl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax incl.
BDT 1,200.00 tax incl.
BDT 0.00 Tax
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 0.00 Tax
BDT 1,200.00 tax incl.
More
In stock
In stock: 9

Reference: RBD-0550

Voice Recognition Module Kit V3 (Elechouse)

(0)
Supply Voltage: 4.5 – 5.5 V. Current : <40 mA. Digital Interface : 5V TTL level for UART interface and GPIO. Support maximum 80 voice commands, with each voice 1500ms (one or two words speaking). Maximum 7 voice commands effective at same time. Arduino library is supplied. User-control General Pin Output. RoboticsBD
BDT 2,780.00
BDT 2,780.00 tax incl.
BDT 2,780.00 tax excl.
BDT 2,780.00 tax excl.
BDT 2,780.00 tax incl.
BDT 2,780.00 tax incl.
BDT 0.00 Tax
BDT 2,780.00 tax excl.
BDT 2,780.00 tax excl.
BDT 0.00 Tax
BDT 2,780.00 tax incl.
More
In-Stock
In stock: 12

Reference: RBD-2419

TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis

(0)
Input Current: 0~5A Output Current: 0.5~4.0A Control Signal: 3.3~24V Power (MAX): 160W Micro Step: 1, 2/A, 2/B, 4, 8, 16, 32 Temperature: -10~45℃ H bridge bipolar constant current drive.
BDT 990.00
BDT 990.00 tax incl.
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 990.00 tax incl.
BDT 990.00 tax incl.
BDT 0.00 Tax
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 0.00 Tax
BDT 990.00 tax incl.
More
In stock
In stock: 17

Reference: RBD-2107

PLA+ Filament 1.75mm Plastic For 3D Printer 1kg/Roll

(0)
Great bio-compatibility, excellent transparency and environment-friendly Low shrinkage, good round shape Accurate diameter (±0.02mm) Easy to print with stable printing performance Various colors are available 100% bio-degradable and FDA food safety approved
BDT 3,050.00
BDT 3,050.00 tax incl.
BDT 3,050.00 tax excl.
BDT 3,050.00 tax excl.
BDT 3,050.00 tax incl.
BDT 3,050.00 tax incl.
BDT 0.00 Tax
BDT 3,050.00 tax excl.
BDT 3,050.00 tax excl.
BDT 0.00 Tax
BDT 3,050.00 tax incl.
More
In-Stock
In stock: 13

Reference: RBD-2511

N-channel power MOSFET - 30V / 60A IRLB8721

(0)
Switching a lot of power? N-channel power MOSFET - 30V / 60A  IRLB8721 MOSFETs are just what you need.These TO-220 package power MOSFETs can switch 30V/60A, which is plenty for most makers! They fit straight into a breadboard or even your own PCB with 2.54mm spaced pads.
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In stock
In stock: 24

Reference: RBD-2182

3D Printer Nozzle M7 Thread Brass 1.75mm

(0)
Filament Support: 1.75mm Material: High-quality brass Color: Brass color Screw outer diameter: M7 If you are not sure which Nozzle size to choose, Please check our guide in the documentation tab below. 
BDT 190.00
BDT 190.00 tax incl.
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 190.00 tax incl.
BDT 190.00 tax incl.
BDT 0.00 Tax
BDT 190.00 tax excl.
BDT 190.00 tax excl.
BDT 0.00 Tax
BDT 190.00 tax incl.
More
In-Stock
In stock: 28

Reference: RBD-0553

FPM10A Optical Fingerprint Reader Sensor Modules (With Shield)

(0)
Supply voltage: DC 3.6 ~ 6.0V / 3.3V Supplying Supply Current: Current: <120mA Peak current: <140mA Fingerprint image time: <1.0 seconds
BDT 3,900.00
BDT 3,900.00 tax incl.
BDT 3,900.00 tax excl.
BDT 3,900.00 tax excl.
BDT 3,900.00 tax incl.
BDT 3,900.00 tax incl.
BDT 0.00 Tax
BDT 3,900.00 tax excl.
BDT 3,900.00 tax excl.
BDT 0.00 Tax
BDT 3,900.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-2676

PWM Signal Generator Stepper Motor Speed Controller Driver Board

(0)
Suitable for use with a wide range of stepper motors and drivers. Can be integrated into a simple control platform with a stepper motor and DC power supply. Offers three selectable low-frequency signal options: high (5.4k-160kHz), middle (540-16.6kHz), and low (80-2.4kHz), adjustable via jumper settings. Capable of producing both pulse and PWM signals,...
BDT 550.00
BDT 550.00 tax incl.
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 550.00 tax incl.
BDT 550.00 tax incl.
BDT 0.00 Tax
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 0.00 Tax
BDT 550.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-0579

GPS GSM GPRS SIM808 Module (Arduino Compatible)

(0)
Quad-band 850/900/1800/1900MHz GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load) GPRS mobile station class B Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands) Supports charging control for Li-Ion battery Supports Real-Time Clock Integrated GPS/CNSS and supports A-GPS Low power consumption, 10mA in sleep...
BDT 3,450.00
BDT 3,450.00 tax incl.
BDT 3,450.00 tax excl.
BDT 3,450.00 tax excl.
BDT 3,450.00 tax incl.
BDT 3,450.00 tax incl.
BDT 0.00 Tax
BDT 3,450.00 tax excl.
BDT 3,450.00 tax excl.
BDT 0.00 Tax
BDT 3,450.00 tax incl.
More
In-Stock
In stock: 20

Reference: RBD-2682

Dual DC Motor Drive Module Industrial Grade PWM Speed Control 7A/160W

(0)
Double H bridge, which can drive two DC motors at the same time, single 7A current, high power; Wide voltage input 6.5V ~ 27V ; Signal optocoupler isolated input, can be directly controlled by IO port, free from interference; Undervoltage protection to prevent instantaneous high current burning of the module; High-power TVS and electrostatic bleeder...
BDT 990.00
BDT 990.00 tax incl.
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 990.00 tax incl.
BDT 990.00 tax incl.
BDT 0.00 Tax
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 0.00 Tax
BDT 990.00 tax incl.
More
In stock
In stock: 10

Reference: RBD-2754

L298N 4WD Motor Driver DC Motor Driver Compatible With 3.3V Support Arduino STM32

(0)
The L298N 4WD Motor Driver is a versatile and robust H-bridge driver module designed for controlling DC motors with ease and precision. With its compatibility with 3.3V microcontrollers and support for popular platforms like Arduino and STM32, this module offers flexibility and convenience in motor control applications.
BDT 795.00
BDT 795.00 tax incl.
BDT 795.00 tax excl.
BDT 795.00 tax excl.
BDT 795.00 tax incl.
BDT 795.00 tax incl.
BDT 0.00 Tax
BDT 795.00 tax excl.
BDT 795.00 tax excl.
BDT 0.00 Tax
BDT 795.00 tax incl.
More
In stock
In stock: 19

Reference: RBD-0702

1 Channel 5V Relay Board Module

(0)
It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red) Relay control interface by single-chip IO. Low-level suction close, high-level release. Easy to use, simple 3 line structure. Note: Relay might be different from the picture as per stock
BDT 88.00
BDT 88.00 tax incl.
BDT 88.00 tax excl.
BDT 88.00 tax excl.
BDT 88.00 tax incl.
BDT 88.00 tax incl.
BDT 0.00 Tax
BDT 88.00 tax excl.
BDT 88.00 tax excl.
BDT 0.00 Tax
BDT 88.00 tax incl.
More
In-Stock
In stock: 63

Reference: RBD-2834

A4988 / DRV8825 Stepper Motor Driver Expansion Board

(0)
Enhance your 3D printer's performance with the DRV8825/A4988 Stable 42 Stepper Motor Driver Expansion Board. This expansion board offers advanced features and superior performance to meet your diverse needs in 3D printing and DIY projects.Note: Please ensure correct installation direction of the drive module to prevent module damage.
BDT 155.00
BDT 155.00 tax incl.
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 155.00 tax incl.
BDT 155.00 tax incl.
BDT 0.00 Tax
BDT 155.00 tax excl.
BDT 155.00 tax excl.
BDT 0.00 Tax
BDT 155.00 tax incl.
More
In stock
In stock: 45

Reference: RBD-0323

Arduino Uno R3 SMD

(0)
Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital I / O Pins 14 (of which 6 provide PWM output) RoboticsBD Analog Input Pins: 6 A programming cable is included.
BDT 574.00
BDT 574.00 tax incl.
BDT 574.00 tax excl.
BDT 574.00 tax excl.
BDT 574.00 tax incl.
BDT 574.00 tax incl.
BDT 0.00 Tax
BDT 574.00 tax excl.
BDT 574.00 tax excl.
BDT 0.00 Tax
BDT 574.00 tax incl.
More
In-Stock
In stock: 151

Reference: RBD-0832

Arduino MicroSD Card Module

(0)
Power supply: 4.5V – 5.5V, 3.3V voltage regulator circuit board Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm Control Interface: GND, VCC, MISO, MOSI, SCK, CS Size: 45 x 28mm Net weight: 6g
BDT 75.00
BDT 75.00 tax incl.
BDT 75.00 tax excl.
BDT 75.00 tax excl.
BDT 75.00 tax incl.
BDT 75.00 tax incl.
BDT 0.00 Tax
BDT 75.00 tax excl.
BDT 75.00 tax excl.
BDT 0.00 Tax
BDT 75.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-0564

AC 0~5A Analog Current Meter Module Ammeter Sensor Board for Arduino

(0)
Onboard precision microcurrent transformer. Onboard sampling resistor. The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA. Rated input current: 5A Rated output current: 5mA Change: 1000: 1 The linear range: 0 ~ 10A (100 ohms) Linearity: 0.2%
BDT 455.00
BDT 455.00 tax incl.
BDT 455.00 tax excl.
BDT 455.00 tax excl.
BDT 455.00 tax incl.
BDT 455.00 tax incl.
BDT 0.00 Tax
BDT 455.00 tax excl.
BDT 455.00 tax excl.
BDT 0.00 Tax
BDT 455.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-0699

1.8" inch TFT LCD Display module ST7735S 128x160

(0)
Display Size: 1.8″ Driver IC: ST7735 Input Voltage (V): 3.3 to 5 Pixel Resolution: 128 x 160 Interface Type: SPI
BDT 590.00
BDT 590.00 tax incl.
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 590.00 tax incl.
BDT 590.00 tax incl.
BDT 0.00 Tax
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 0.00 Tax
BDT 590.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-0576

STM8S103F3P6 ARM STM8 Minimum System Development Board Module (Arduino Compatible)

(0)
Chipboard STM32F103C8T6 On board, SWIM interface and reset button Micro USB line or the 2.54 pin to link to the power with the input voltage 4.5V-15V. Power light and the Demo indicator light Leads all the pins and has detailed label for the Pins. Support SWIM debug mode. RoboticsBD
BDT 450.00
BDT 450.00 tax incl.
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 450.00 tax incl.
BDT 450.00 tax incl.
BDT 0.00 Tax
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 0.00 Tax
BDT 450.00 tax incl.
More
In-Stock
In stock: 25

Reference: RBD-0575

PH Meter Digital Tester Aquarium Pool Water Urine Wine LCD Pen Monitor Protable

(0)
Main color: Yellow Measure range: 0.00-14.00pH Resolution: 0.01pH Accuracy: ±0.05pH Calibration: two points automatic calibration
BDT 790.00
BDT 790.00 tax incl.
BDT 790.00 tax excl.
BDT 790.00 tax excl.
BDT 790.00 tax incl.
BDT 790.00 tax incl.
BDT 0.00 Tax
BDT 790.00 tax excl.
BDT 790.00 tax excl.
BDT 0.00 Tax
BDT 790.00 tax incl.
More
In-Stock
In stock: 30

Reference: RBD-0439

Arduino Android IOS HM-10 BLE Bluetooth 4.0 CC2540 CC2541 Serial Wireless Module

(0)
Bluetooth Protocol: Bluetooth Specification V4.0 BLE USB Protocol: USB V2.0 Operating Frequency: 2.4GHz ISM band Modulation Mode: GFSK (Gaussian Frequency Shift Keying) Transmitting Power: ≤4dBm Sensitivity: ≤-84dBm at 0.1% BER It’s easy to use and completely encapsulated. You can set it as slave or master. You can use AT command set the baud rate....
BDT 470.00
BDT 470.00 tax incl.
BDT 470.00 tax excl.
BDT 470.00 tax excl.
BDT 470.00 tax incl.
BDT 470.00 tax incl.
BDT 0.00 Tax
BDT 470.00 tax excl.
BDT 470.00 tax excl.
BDT 0.00 Tax
BDT 470.00 tax incl.
More
In-Stock
In stock: 37

Reference: RBD-0914

MAX7219 4 Channel Dot Matrix Display Panel

(0)
Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 320 mA Display Dimensions: 32x32x6 (LxWxH) mm PCB Dimensions: 128×32 (LxW) mm
BDT 650.00
BDT 650.00 tax incl.
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 650.00 tax incl.
BDT 650.00 tax incl.
BDT 0.00 Tax
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 0.00 Tax
BDT 650.00 tax incl.
More
In-Stock
In stock: 27

Reference: RBD-0915

UART EM4100 RFID Card Reader RDM6300

(0)
Maximum effective distance up to 150mm Less than 100ms decoding time Support external antenna Uart interface Support EM4100 compatible read-only or read/write tags Small outline design
BDT 415.00
BDT 415.00 tax incl.
BDT 415.00 tax excl.
BDT 415.00 tax excl.
BDT 415.00 tax incl.
BDT 415.00 tax incl.
BDT 0.00 Tax
BDT 415.00 tax excl.
BDT 415.00 tax excl.
BDT 0.00 Tax
BDT 415.00 tax incl.
More
In-Stock
In stock: 58

Reference: RBD-0948

ESP32 ESP-32S 30P NodeMCU Development Board Wireless WiFi

(0)
Built-in Flash: 32Mbit Power supply: 5V WiFi protocol: IEEE 802.11 b/g/n Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S Logic level: 3.3V A high-quality USB cable is essential for this board to ensure sufficient current supply; otherwise, your board may not be recognized by the Windows Device Manager. Please avoid using mobile phone cables and...
BDT 470.00
BDT 470.00 tax incl.
BDT 470.00 tax excl.
BDT 470.00 tax excl.
BDT 470.00 tax incl.
BDT 470.00 tax incl.
BDT 0.00 Tax
BDT 470.00 tax excl.
BDT 470.00 tax excl.
BDT 0.00 Tax
BDT 470.00 tax incl.
More
In-Stock
In stock: 195

Reference: RBD-0980

NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix WS2812 5050 RGB LED

(0)
Dimensions : 66 x 66 x 3 mm. Weight : 25 gm. Supply Voltage : 5 VDC. Interface : IO . 8 x 8 = 64 RGB. Chip : WS2812.
BDT 425.00
BDT 425.00 tax incl.
BDT 425.00 tax excl.
BDT 425.00 tax excl.
BDT 425.00 tax incl.
BDT 425.00 tax incl.
BDT 0.00 Tax
BDT 425.00 tax excl.
BDT 425.00 tax excl.
BDT 0.00 Tax
BDT 425.00 tax incl.
More
In-Stock
In stock: 25

Reference: RBD-0981

MT8870 DTMF Audio Decoder Module

(0)
Low power device.  DTMF decoder chip.  Band-split filter. Digital decoding functions. Modem interfaces.  Mobile radios.
BDT 290.00
BDT 290.00 tax incl.
BDT 290.00 tax excl.
BDT 290.00 tax excl.
BDT 290.00 tax incl.
BDT 290.00 tax incl.
BDT 0.00 Tax
BDT 290.00 tax excl.
BDT 290.00 tax excl.
BDT 0.00 Tax
BDT 290.00 tax incl.
More
In-Stock
In stock: 52

Reference: RBD-0985

Xbee Shield For Arduino V03

(0)
Stackable design, easy to plug into the ARDUINO development board. Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly. 3.3v and 5v dual power output. 3.3v and 5v IO compatible. USB2.0 protocol.
BDT 490.00
BDT 490.00 tax incl.
BDT 490.00 tax excl.
BDT 490.00 tax excl.
BDT 490.00 tax incl.
BDT 490.00 tax incl.
BDT 0.00 Tax
BDT 490.00 tax excl.
BDT 490.00 tax excl.
BDT 0.00 Tax
BDT 490.00 tax incl.
More
In-Stock
In stock: 22

Reference: RBD-0987

Arduino NANO I/O Extension Shield

(0)
Compatible with Arduino NANO All digital and analog pins breakout Compact size; External power supply current support Leads all pins out, convenient for wiring and doing experiments.
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In-Stock
In stock: 37

Reference: RBD-0990

XFS5152CE Speech Synthesis Module TTS Voice Module

(0)
Support any Chinese text, English text synthesis, and support for English mixed Support voice codec function, the user can use the chip for direct recording and playback Support speech recognition function, can support the recognition of 30 command words.
BDT 2,100.00
BDT 2,100.00 tax incl.
BDT 2,100.00 tax excl.
BDT 2,100.00 tax excl.
BDT 2,100.00 tax incl.
BDT 2,100.00 tax incl.
BDT 0.00 Tax
BDT 2,100.00 tax excl.
BDT 2,100.00 tax excl.
BDT 0.00 Tax
BDT 2,100.00 tax incl.
More
In-Stock
In stock: 9

Follow us on Facebook