Filter By

Availability

Availability

Selections

Selections

Price

Price

  • BDT 3.00 - BDT 68,950.00

Categories

Categories

Jumper Wire Type

Jumper Wire Type

Brand

Brand

Weight

Weight

  • 0 kg - 5,000 kg

  • Banner

Active filters
  • Categories: Arduino Shield & Module
  • Categories: CNC & Laser Cutter
  • Categories: HMI
  • Categories: Raspberry Pi
  • Categories: RFID/ NFC

Reference: RBD-0443

GPRS GSM SIM900 Arduino Shield

(0)
Based on SIMCom‘s SIM900 Module Quad-Band 850 / 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world. Control by AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).
BDT 2,400.00
BDT 2,400.00 tax incl.
BDT 2,400.00 tax excl.
BDT 2,400.00 tax excl.
BDT 2,400.00 tax incl.
BDT 2,400.00 tax incl.
BDT 0.00 Tax
BDT 2,400.00 tax excl.
BDT 2,400.00 tax excl.
BDT 0.00 Tax
BDT 2,400.00 tax incl.
More
In-Stock
In stock: 22

Reference: RBD-0340

Brand: Waveshare

5inch HDMI Touch Screen (B) + Bicolor Case (Original Waveshare)

(0)
Size: 5″ Resolution: 800×480 Display Port: HDMI Resistive touch control. Support backlight control, more power saving. RoboticsBD
BDT 6,300.00
BDT 6,300.00 tax incl.
BDT 6,300.00 tax excl.
BDT 6,300.00 tax excl.
BDT 6,300.00 tax incl.
BDT 6,300.00 tax incl.
BDT 0.00 Tax
BDT 6,300.00 tax excl.
BDT 6,300.00 tax excl.
BDT 0.00 Tax
BDT 6,300.00 tax incl.
More
Last items in stock
In stock: 3

Reference: RBD-0189

Brand: DFRobot

Xbee Shield for Arduino (without Xbee)

(0)
Xbee Shield for Arduino (without Xbee) INTRODUCTION: The XBee Expansion Board is a compliant solution designed to meet low-cost, low-power wireless sensor networks with special needs.The module is easy to use, low power consumption, and the provision of critical data between devices reliable transmission.
BDT 1,200.00
BDT 1,200.00 tax incl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 1,200.00 tax incl.
BDT 1,200.00 tax incl.
BDT 0.00 Tax
BDT 1,200.00 tax excl.
BDT 1,200.00 tax excl.
BDT 0.00 Tax
BDT 1,200.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-0550

Voice Recognition Module Kit V3 (Elechouse)

(0)
Supply Voltage: 4.5 – 5.5 V. Current : <40 mA. Digital Interface : 5V TTL level for UART interface and GPIO. Support maximum 80 voice commands, with each voice 1500ms (one or two words speaking). Maximum 7 voice commands effective at same time. Arduino library is supplied. User-control General Pin Output. RoboticsBD
BDT 2,780.00
BDT 2,780.00 tax incl.
BDT 2,780.00 tax excl.
BDT 2,780.00 tax excl.
BDT 2,780.00 tax incl.
BDT 2,780.00 tax incl.
BDT 0.00 Tax
BDT 2,780.00 tax excl.
BDT 2,780.00 tax excl.
BDT 0.00 Tax
BDT 2,780.00 tax incl.
More
In-Stock
In stock: 12

Reference: RBD-0274

Brand: Waveshare

Raspberry Pi 5inch Resistive Touch HDMI LCD

(0)
5 inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi Installation Instruction: http://www.waveshare.com/wiki/5inch_HDMI_LCD Raspbian Image for 5 inch HDMI Diplay with Touch :  Raspbian 5 inch HDMI with Touch Download Link    
BDT 4,850.00
BDT 4,850.00 tax incl.
BDT 4,850.00 tax excl.
BDT 4,850.00 tax excl.
BDT 4,850.00 tax incl.
BDT 4,850.00 tax incl.
BDT 0.00 Tax
BDT 4,850.00 tax excl.
BDT 4,850.00 tax excl.
BDT 0.00 Tax
BDT 4,850.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0552

A6 Pro Serial GPRS GSM Module Core Development Board

(0)
Working frequency: quad-band network, 850 / 900 / 1800 / 1900MHz Working voltage: 4.8-9VDC(On-board voltage regulator circuit supply power for A6 module) Working Current: maximum of 2A. RoboticsBD
BDT 1,100.00
BDT 1,100.00 tax incl.
BDT 1,100.00 tax excl.
BDT 1,100.00 tax excl.
BDT 1,100.00 tax incl.
BDT 1,100.00 tax incl.
BDT 0.00 Tax
BDT 1,100.00 tax excl.
BDT 1,100.00 tax excl.
BDT 0.00 Tax
BDT 1,100.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0339

Brand: Waveshare

3.5inch Resistive Touch Display (B) for Raspberry Pi

(0)
3.5inch Resistive Touch Display (B) For Raspberry Pi 480×320 IPS Screen SPI Check out New Product 3.5inch HDMI Display-B
BDT 3,900.00
BDT 3,900.00 tax incl.
BDT 3,900.00 tax excl.
BDT 3,900.00 tax excl.
BDT 3,900.00 tax incl.
BDT 3,900.00 tax incl.
BDT 0.00 Tax
BDT 3,900.00 tax excl.
BDT 3,900.00 tax excl.
BDT 0.00 Tax
BDT 3,900.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-1929

3.5inch HDMI Display-B

(0)
General-purpose HDMI display, Connecting computers, TV boxes, Microsoft Xbox360, SONY PS4, Nintendo Switch and so on Can be used as Raspberry Pi display that supports Raspbian, Ubuntu, Kodi, Win10 IOT, single-touch, free drive Can be used as PC monitor, support Win7, Win8, Win10 system (No touch Function)
BDT 3,800.00
BDT 3,800.00 tax incl.
BDT 3,800.00 tax excl.
BDT 3,800.00 tax excl.
BDT 3,800.00 tax incl.
BDT 3,800.00 tax incl.
BDT 0.00 Tax
BDT 3,800.00 tax excl.
BDT 3,800.00 tax excl.
BDT 0.00 Tax
BDT 3,800.00 tax incl.
More
In-Stock
In stock: 7

Reference: RBD-0553

FPM10A Optical Fingerprint Reader Sensor Modules (With Shield)

(0)
Supply voltage: DC 3.6 ~ 6.0V / 3.3V Supplying Supply Current: Current: <120mA Peak current: <140mA Fingerprint image time: <1.0 seconds
BDT 3,900.00
BDT 3,900.00 tax incl.
BDT 3,900.00 tax excl.
BDT 3,900.00 tax excl.
BDT 3,900.00 tax incl.
BDT 3,900.00 tax incl.
BDT 0.00 Tax
BDT 3,900.00 tax excl.
BDT 3,900.00 tax excl.
BDT 0.00 Tax
BDT 3,900.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-0579

GPS GSM GPRS SIM808 Module (Arduino Compatible)

(0)
Quad-band 850/900/1800/1900MHz GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load) GPRS mobile station class B Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands) Supports charging control for Li-Ion battery Supports Real-Time Clock Integrated GPS/CNSS and supports A-GPS Low power consumption, 10mA in sleep...
BDT 3,450.00
BDT 3,450.00 tax incl.
BDT 3,450.00 tax excl.
BDT 3,450.00 tax excl.
BDT 3,450.00 tax incl.
BDT 3,450.00 tax incl.
BDT 0.00 Tax
BDT 3,450.00 tax excl.
BDT 3,450.00 tax excl.
BDT 0.00 Tax
BDT 3,450.00 tax incl.
More
In-Stock
In stock: 20

Reference: RBD-0305

3.5 inch RPi Display

(0)
LCD Type: TFT LCD Interface: SPI Touch Screen Type: Resistive Touch Screen Controller: XPT2046 Colors: 65536 Backlight: LED Resolution: 480*320 (Pixel) Dimensions: 84.91×56.54 (MM) Compatible with Raspberry Pi B, Raspberry Pi B+, Raspberry Pi 2 & Raspberry Pi 3
BDT 3,800.00
BDT 3,800.00 tax incl.
BDT 3,800.00 tax excl.
BDT 3,800.00 tax excl.
BDT 3,800.00 tax incl.
BDT 3,800.00 tax incl.
BDT 0.00 Tax
BDT 3,800.00 tax excl.
BDT 3,800.00 tax excl.
BDT 0.00 Tax
BDT 3,800.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-1574

Argon ONE V2 Raspberry Pi 4 Case

(0)
Full-size HDMI  ports - Use your existing cables! Infrared receiver - perfect for media center projects! Sleek Aluminum Enclosure Made with aluminum alloy and polished with a modern Space Grey finish for stunning aesthetics and functionality. Passive & Active Cooling. RoboticsBD The case top provides passive cooling for the Raspberry Pi, alongside a...
BDT 4,990.00
BDT 4,990.00 tax incl.
BDT 4,990.00 tax excl.
BDT 4,990.00 tax excl.
BDT 4,990.00 tax incl.
BDT 4,990.00 tax incl.
BDT 0.00 Tax
BDT 4,990.00 tax excl.
BDT 4,990.00 tax excl.
BDT 0.00 Tax
BDT 4,990.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0684

Motor Driver - Dual TB6612FNG (1A)

(0)
CW/CCW/short break/stop motor control modes Built-in thermal shutdown circuit and a low voltage detecting circuit Standby control to save power CW/CCW/short brake/stop motor control modes Operating Voltage(VDC): 15 Peak Current (A): 3.2 Continuous Current (A): 1.2 No. of Channels: 1
BDT 420.00
BDT 420.00 tax incl.
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 420.00 tax incl.
BDT 420.00 tax incl.
BDT 0.00 Tax
BDT 420.00 tax excl.
BDT 420.00 tax excl.
BDT 0.00 Tax
BDT 420.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-1828

Argon ONE M.2 Case for Raspberry Pi 4

(0)
Sleek aluminum alloy enclosure Plastic base for excellent Wi-Fi signal strength Easy installation with magnetic removable top Easily accessible GPIO with color-coded pinouts M.2 SATA SSD NOT INCLUDED
BDT 6,990.00
BDT 6,990.00 tax incl.
BDT 6,990.00 tax excl.
BDT 6,990.00 tax excl.
BDT 6,990.00 tax incl.
BDT 6,990.00 tax incl.
BDT 0.00 Tax
BDT 6,990.00 tax excl.
BDT 6,990.00 tax excl.
BDT 0.00 Tax
BDT 6,990.00 tax incl.
More
Out-of-Stock
In stock: -7

Reference: RBD-0702

1 Channel 5V Relay Board Module

(0)
It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red) Relay control interface by single-chip IO. Low-level suction close, high-level release. Easy to use, simple 3 line structure. Note: Relay might be different from the picture as per stock
BDT 88.00
BDT 88.00 tax incl.
BDT 88.00 tax excl.
BDT 88.00 tax excl.
BDT 88.00 tax incl.
BDT 88.00 tax incl.
BDT 0.00 Tax
BDT 88.00 tax excl.
BDT 88.00 tax excl.
BDT 0.00 Tax
BDT 88.00 tax incl.
More
In-Stock
In stock: 63

Reference: RBD-1143

Raspberry Pi 4 Aluminum Alloy Case with Cooling Fan

(0)
Type: Raspberry Pi 4 Model B Aluminum Alloy Metal Case Material: Black/Silver Aluminum Alloy Metal Compatible For Raspberry PI4 Model B Easy to install, Ultra-thin design. All ports and slots of the case can match with Raspberry Pi 4 Model B perfectly
BDT 990.00
BDT 990.00 tax incl.
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 990.00 tax incl.
BDT 990.00 tax incl.
BDT 0.00 Tax
BDT 990.00 tax excl.
BDT 990.00 tax excl.
BDT 0.00 Tax
BDT 990.00 tax incl.
More
In-Stock
In stock: 39

Reference: RBD-0703

SSC-32 32Ch Servo Controller Lynxmotion Compatible

(0)
Controls up to 32 servo motors Comes preassembled USB interface (cable included), Xbee socket, and TTL serial Bidirectional communication with Query commands Large capacitors to prevent brownouts
BDT 3,400.00
BDT 3,400.00 tax incl.
BDT 3,400.00 tax excl.
BDT 3,400.00 tax excl.
BDT 3,400.00 tax incl.
BDT 3,400.00 tax incl.
BDT 0.00 Tax
BDT 3,400.00 tax excl.
BDT 3,400.00 tax excl.
BDT 0.00 Tax
BDT 3,400.00 tax incl.
More
In-Stock
In stock: 7

Reference: RBD-1165

Raspberry Pi 4 Acrylic Shell Case with Cooling Fan

(0)
9 Layer Acrylic stylish case with access to all Ports on pi 4 Compatible for All variant of the Raspberry pi 4 Model B Slot for Cooling Fan Easy to assemble with Nut-Bolts included Slots to route GPIO and CSI ribbon cable Cut-out for micro SC card at the bottom panel
BDT 650.00
BDT 650.00 tax incl.
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 650.00 tax incl.
BDT 650.00 tax incl.
BDT 0.00 Tax
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 0.00 Tax
BDT 650.00 tax incl.
More
In-Stock
In stock: 31

Reference: RBD-0323

Arduino Uno R3 SMD

(0)
Microcontroller ATmega328 (SMD) – Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Digital I / O Pins 14 (of which 6 provide PWM output) RoboticsBD Analog Input Pins: 6 A programming cable is included.
BDT 574.00
BDT 574.00 tax incl.
BDT 574.00 tax excl.
BDT 574.00 tax excl.
BDT 574.00 tax incl.
BDT 574.00 tax incl.
BDT 0.00 Tax
BDT 574.00 tax excl.
BDT 574.00 tax excl.
BDT 0.00 Tax
BDT 574.00 tax incl.
More
In-Stock
In stock: 151

Reference: RBD-0742

Motor Driver 43A BTS7960

(0)
Input voltage(V): 6 – 27. Maximum current(A): 43. Input level(V): 3.3 – 5. Duty cycle: 0 – 100%. Path resistance: 16 mΩ at 25°C. Low quiescent current: 7 µA at 25°C.
BDT 670.00
BDT 670.00 tax incl.
BDT 670.00 tax excl.
BDT 670.00 tax excl.
BDT 670.00 tax incl.
BDT 670.00 tax incl.
BDT 0.00 Tax
BDT 670.00 tax excl.
BDT 670.00 tax excl.
BDT 0.00 Tax
BDT 670.00 tax incl.
More
In-Stock
In stock: 44

Reference: RBD-0347

Transparent Acrylic Shell Case for Raspberry Pi 3 Model B/B+

(0)
9 Layer Acrylic stylish case with access to all Ports on Raspberry Pi 3 B/B+ Slot for Cooling Fan Easy to assemble with Nut-Bolts included Slots to route GPIO and CSI ribbon cable Cut-out for micro SC card at the bottom panel. RoboticsBD Note: Cooling fan is not included.
BDT 495.00
BDT 495.00 tax incl.
BDT 495.00 tax excl.
BDT 495.00 tax excl.
BDT 495.00 tax incl.
BDT 495.00 tax incl.
BDT 0.00 Tax
BDT 495.00 tax excl.
BDT 495.00 tax excl.
BDT 0.00 Tax
BDT 495.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-1234

Raspberry Pi 4 Case – Red/White

(0)
Easy two-piece installation design Hole for mounting the pi inside the case Rubber pad grip at the bottom Precise access to all port and status LEDs with Symbols Raspberry LOGO on Top
BDT 599.00
BDT 599.00 tax incl.
BDT 599.00 tax excl.
BDT 599.00 tax excl.
BDT 599.00 tax incl.
BDT 599.00 tax incl.
BDT 0.00 Tax
BDT 599.00 tax excl.
BDT 599.00 tax excl.
BDT 0.00 Tax
BDT 599.00 tax incl.
More
In-Stock
In stock: 13

Reference: RBD-0832

Arduino MicroSD Card Module

(0)
Power supply: 4.5V – 5.5V, 3.3V voltage regulator circuit board Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm Control Interface: GND, VCC, MISO, MOSI, SCK, CS Size: 45 x 28mm Net weight: 6g
BDT 75.00
BDT 75.00 tax incl.
BDT 75.00 tax excl.
BDT 75.00 tax excl.
BDT 75.00 tax incl.
BDT 75.00 tax incl.
BDT 0.00 Tax
BDT 75.00 tax excl.
BDT 75.00 tax excl.
BDT 0.00 Tax
BDT 75.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-1242

Raspberry Pi 4 Acrylic Case

(0)
6-piece Acrylic case with access to all Ports on pi 4 Compatible for All variant of the Raspberry pi 4 Model B Slot for Cooling Fan Easy to assemble without any Screws or Nut-Bolts Slots to route GPIO and CSI ribbon cable Cut-out for micro SC card at the bottom panel Mounting holes and anti-slip rubber feet at the back.
BDT 299.00
BDT 299.00 tax incl.
BDT 299.00 tax excl.
BDT 299.00 tax excl.
BDT 299.00 tax incl.
BDT 299.00 tax incl.
BDT 0.00 Tax
BDT 299.00 tax excl.
BDT 299.00 tax excl.
BDT 0.00 Tax
BDT 299.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0564

AC 0~5A Analog Current Meter Module Ammeter Sensor Board for Arduino

(0)
Onboard precision microcurrent transformer. Onboard sampling resistor. The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA. Rated input current: 5A Rated output current: 5mA Change: 1000: 1 The linear range: 0 ~ 10A (100 ohms) Linearity: 0.2%
BDT 455.00
BDT 455.00 tax incl.
BDT 455.00 tax excl.
BDT 455.00 tax excl.
BDT 455.00 tax incl.
BDT 455.00 tax incl.
BDT 0.00 Tax
BDT 455.00 tax excl.
BDT 455.00 tax excl.
BDT 0.00 Tax
BDT 455.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-1413

Brand: Raspberry Pi Official

Raspberry Pi Zero Official Case with GPIO and Camera Hole for Raspberry Pi Zero & Zero W

(0)
Material: ABS- 3 different cover board- Color: White & Red- Use For: Raspberry Pi Zero V1.3 and Raspberry Pi Zero W- Camera Cable Length: 37mm
BDT 330.00
BDT 330.00 tax incl.
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 330.00 tax incl.
BDT 330.00 tax incl.
BDT 0.00 Tax
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 0.00 Tax
BDT 330.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-0699

1.8" inch TFT LCD Display module ST7735S 128x160

(0)
Display Size: 1.8″ Driver IC: ST7735 Input Voltage (V): 3.3 to 5 Pixel Resolution: 128 x 160 Interface Type: SPI
BDT 590.00
BDT 590.00 tax incl.
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 590.00 tax incl.
BDT 590.00 tax incl.
BDT 0.00 Tax
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 0.00 Tax
BDT 590.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-1596

Brand: Raspberry Pi Official

Official Power Supply for Raspberry Pi 4 (White)

(0)
Good Quality material 96-230Vac operating input range 50,000 hours MTBF Input Current: 0.5A maximum Input Power consumption (no load): 0.075W maximum USB-C connection goes straight into your Raspberry Pi
BDT 1,450.00
BDT 1,450.00 tax incl.
BDT 1,450.00 tax excl.
BDT 1,450.00 tax excl.
BDT 1,450.00 tax incl.
BDT 1,450.00 tax incl.
BDT 0.00 Tax
BDT 1,450.00 tax excl.
BDT 1,450.00 tax excl.
BDT 0.00 Tax
BDT 1,450.00 tax incl.
More
In-Stock
In stock: 35

Reference: RBD-0576

STM8S103F3P6 ARM STM8 Minimum System Development Board Module (Arduino Compatible)

(0)
Chipboard STM32F103C8T6 On board, SWIM interface and reset button Micro USB line or the 2.54 pin to link to the power with the input voltage 4.5V-15V. Power light and the Demo indicator light Leads all the pins and has detailed label for the Pins. Support SWIM debug mode. RoboticsBD
BDT 450.00
BDT 450.00 tax incl.
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 450.00 tax incl.
BDT 450.00 tax incl.
BDT 0.00 Tax
BDT 450.00 tax excl.
BDT 450.00 tax excl.
BDT 0.00 Tax
BDT 450.00 tax incl.
More
In-Stock
In stock: 25

Reference: RBD-1690

Raspberry Pi 4 Power Supply 5V 3A USB Type C

(0)
ON/OFF switch button on the power adapter.  Very convenient for use. 5V 3A standard power supply for Raspberry Pi 4 Model B. There is CE certification for the power adapter. Best Adapter for Raspberry Pi 4
BDT 700.00
BDT 700.00 tax incl.
BDT 700.00 tax excl.
BDT 700.00 tax excl.
BDT 700.00 tax incl.
BDT 700.00 tax incl.
BDT 0.00 Tax
BDT 700.00 tax excl.
BDT 700.00 tax excl.
BDT 0.00 Tax
BDT 700.00 tax incl.
In-Stock
In stock: 14

Reference: RBD-0575

PH Meter Digital Tester Aquarium Pool Water Urine Wine LCD Pen Monitor Protable

(0)
Main color: Yellow Measure range: 0.00-14.00pH Resolution: 0.01pH Accuracy: ±0.05pH Calibration: two points automatic calibration
BDT 790.00
BDT 790.00 tax incl.
BDT 790.00 tax excl.
BDT 790.00 tax excl.
BDT 790.00 tax incl.
BDT 790.00 tax incl.
BDT 0.00 Tax
BDT 790.00 tax excl.
BDT 790.00 tax excl.
BDT 0.00 Tax
BDT 790.00 tax incl.
More
In-Stock
In stock: 30

Reference: RBD-1309

Raspberry Pi Power Adapter with Switch Micro USB

(0)
Input Voltage (V): 100 ~ 280 VAC @50 ~ 60Hz. Input current (mA): 100. Output Power: 5V 3A. Load regulation (%): ±5. Input Plug: 2-Pin EU type. Output Plug: Micro USB Plug. Compatible with: Raspberry Pi B+, 2, 2B, 2B+,3 ,3B+, Zero, Zero W. It has a switch so you can easily power off the device without having to unplug it right from the socket.
BDT 525.00
BDT 525.00 tax incl.
BDT 525.00 tax excl.
BDT 525.00 tax excl.
BDT 525.00 tax incl.
BDT 525.00 tax incl.
BDT 0.00 Tax
BDT 525.00 tax excl.
BDT 525.00 tax excl.
BDT 0.00 Tax
BDT 525.00 tax incl.
More
In-Stock
In stock: 27

Follow us on Facebook