Home

  • Banner

Active filters
  • Categories: 3D Printed
  • Categories: 3D Printer
  • Categories: Display
  • Categories: Industrial Component
  • Categories: Motor Driver
  • Categories: RFID/ NFC
INA125P Bangladesh Quick view

Reference: RBD-0276

INA125P Instrumentation Amplifier With Precision Voltage Reference

(0)
The INA125 is a low-power, high-accuracy instrumentation amplifier with a precision voltage reference. It provides complete bridge excitation and precision differential-input amplification on a single integrated circuit. A single external resistor sets any gain from 4 to 10,000. The INA125 is laser-trimmed for low offset voltage (250µV), low offset drift...
BDT 1,150.00
BDT 1,150.00 tax incl.
BDT 1,150.00 tax excl.
BDT 1,150.00 tax excl.
BDT 1,150.00 tax incl.
BDT 1,150.00 tax incl.
BDT 0.00 Tax
BDT 1,150.00 tax excl.
BDT 1,150.00 tax excl.
BDT 0.00 Tax
BDT 1,150.00 tax incl.
More
In-Stock
In stock: 7
Out-of-Stock Raspberry Pi 5inch Resistive Touch HDMI LCD Quick view

Reference: RBD-0274

Brand: Waveshare

Raspberry Pi 5inch Resistive Touch HDMI LCD

(0)
5 inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi Installation Instruction: http://www.waveshare.com/wiki/5inch_HDMI_LCD Raspbian Image for 5 inch HDMI Diplay with Touch :  Raspbian 5 inch HDMI with Touch Download Link    
BDT 4,850.00
BDT 4,850.00 tax incl.
BDT 4,850.00 tax excl.
BDT 4,850.00 tax excl.
BDT 4,850.00 tax incl.
BDT 4,850.00 tax incl.
BDT 0.00 Tax
BDT 4,850.00 tax excl.
BDT 4,850.00 tax excl.
BDT 0.00 Tax
BDT 4,850.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock 3D Prnted Robotics claw with servo motor Quick view

Reference: RBD-0268

Brand: RoboticsBD

3D Printed Robotics claw with servo motor

(0)
Description: Material: PLA (3D Printed)Claw max angle: 55mmLength: 108mmWidth: 98mm (streched)Color: Golden, Blue, Red Servo Motor: MG996R
BDT 1,500.00
BDT 1,500.00 tax incl.
BDT 1,500.00 tax excl.
BDT 1,500.00 tax excl.
BDT 1,500.00 tax incl.
BDT 1,500.00 tax incl.
BDT 0.00 Tax
BDT 1,500.00 tax excl.
BDT 1,500.00 tax excl.
BDT 0.00 Tax
BDT 1,500.00 tax incl.
More
Out-of-Stock
In stock: 0
Motor Shield L293D Robotics Bangladesh Quick view

Reference: RBD-0015

Motor Shield L293D

(0)
2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5%...
BDT 219.00
BDT 219.00 tax incl.
BDT 219.00 tax excl.
BDT 219.00 tax excl.
BDT 219.00 tax incl.
BDT 219.00 tax incl.
BDT 0.00 Tax
BDT 219.00 tax excl.
BDT 219.00 tax excl.
BDT 0.00 Tax
BDT 219.00 tax incl.
More
In-Stock
In stock: 133
Creality Ender-3 V3 SE 3D Printer Robotics Bangladesh Quick view

Reference: RBD-2436

Brand: Creality Official

Creality Ender-3 V3 SE 3D Printer

(0)
Creality Ender-3 V3 SE 3D Printer Max printing speed of 250mm/s and 2500mm/s² acceleration Auto leveling with CR Touch & Strain Sensor for precise prints "Sprite" Direct Extruder for PLA, PETG, and flexible TPU Stable Dual Z-axis and Y-axis Dual Linear Shafts for reliable printing Auto filament loading and unloading for easy filament changes
BDT 39,490.00
BDT 39,490.00 tax incl.
BDT 39,490.00 tax excl.
BDT 39,490.00 tax excl.
BDT 39,490.00 tax incl.
BDT 39,490.00 tax incl.
BDT 0.00 Tax
BDT 39,490.00 tax excl.
BDT 39,490.00 tax excl.
BDT 0.00 Tax
BDT 39,490.00 tax incl.
More
Last items in stock
In stock: 2
JT308 RFID Card Reader USB - 125Khz Robotics Bangladesh Quick view

Reference: RBD-1097

JT308 RFID Card Reader USB - 125Khz

(0)
Frequency: 125Khz. Support μEM4001, 4100, or its compatible RFID, ID card. Read first 10 digits of the RFID/Proximity card. Support Windows95/98/2000/XP/7/8. Plug and Play Reliable working condition Powered directly from USB, no need external power supply
BDT 840.00
BDT 840.00 tax incl.
BDT 840.00 tax excl.
BDT 840.00 tax excl.
BDT 840.00 tax incl.
BDT 840.00 tax incl.
BDT 0.00 Tax
BDT 840.00 tax excl.
BDT 840.00 tax excl.
BDT 0.00 Tax
BDT 840.00 tax incl.
More
In-Stock
In stock: 16
Weighing Sensor 24 Bit HX711 Dual-Channel Quick view

Reference: RBD-0344

Weighing Sensor 24 Bit Load Cell Amplifier HX711

(0)
Output Sensitivity: 1.0 ± 0.1 mV / V. Two selectable differential input channels. On-chip active low noise PGA with the selectable gain of 32, 64 and 128. On-chip oscillator requiring no external component with optional external crystal. On-chip power-on-reset. Measurement Resolution: 24 bit. RoboticsBD
BDT 199.00
BDT 199.00 tax incl.
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 199.00 tax incl.
BDT 199.00 tax incl.
BDT 0.00 Tax
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 0.00 Tax
BDT 199.00 tax incl.
More
In-Stock
In stock: 29
- BDT 20.00 Reduced price Arduino Uno R3 Bumper Robotics Bangladesh Quick view

Reference: RBD-0286

Arduino Uno R3 Bumper

(0)
3D Printed Arduino Uno R3 Bumper or base.Short Circuit Prevention: Safeguard your microcontroller against the risk of short circuits when placing it on a flat conductive surface. The bumper acts as a protective barrier, reducing the chances of accidental electrical contact. Note: Arduino Uno is not included
BDT 30.00 BDT 50.00
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax incl.
BDT 50.00 BDT 30.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax excl.
BDT 50.00 BDT 30.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 50.00 BDT 30.00 tax incl.
More
In stock
In stock: 14
Out-of-Stock Big Easy Driver - Stepper Motor Driver Quick view

Reference: RBD-0267

Big Easy Driver - Stepper Motor Driver

(0)
Bi-polar Microstepping Driver 2A/Phase Max 1.4-1.7A/Phase w/o Heatsink Max Motor Drive Voltage: 30V On-board 5V/3.3V Regulation Low RDS(ON) outputs Automatic current decay mode detection/selection Mixed and Slow current decay modes Synchronous rectification for low power dissipation Internal UVLO Crossover-current protection 3.3 and 5 V compatible logic...
BDT 1,600.00
BDT 1,600.00 tax incl.
BDT 1,600.00 tax excl.
BDT 1,600.00 tax excl.
BDT 1,600.00 tax incl.
BDT 1,600.00 tax incl.
BDT 0.00 Tax
BDT 1,600.00 tax excl.
BDT 1,600.00 tax excl.
BDT 0.00 Tax
BDT 1,600.00 tax incl.
More
Out-of-Stock
In stock: 0
LCD Keypad Shield for Arduino Robotics Bangladesh Quick view

Reference: RBD-0159

LCD Keypad Shield for Arduino

(0)
Provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 6 keys select, up, right, down, left and reset. To save the digital IO pins, the keypad interface only uses one ADC channel. The key value is read out through a 5 stage voltage...
BDT 550.00
BDT 550.00 tax incl.
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 550.00 tax incl.
BDT 550.00 tax incl.
BDT 0.00 Tax
BDT 550.00 tax excl.
BDT 550.00 tax excl.
BDT 0.00 Tax
BDT 550.00 tax incl.
More
In-Stock
In stock: 33
Creality CR-10 Smart Pro 3D Printer Robotics Bangladesh Quick view

Reference: RBD-2437

Brand: Creality Official

Creality CR-10 Smart Pro 3D Printer

(0)
Build area: 300 x 300 x 400 mm Maximum print head temperature: 300°C Maximum bed temperature: 100°C Communication: WiFi, USB Supported materials: PLA, ABS, PETG, TPU, PA, and carbon fiber composites.
BDT 86,245.00
BDT 86,245.00 tax incl.
BDT 86,245.00 tax excl.
BDT 86,245.00 tax excl.
BDT 86,245.00 tax incl.
BDT 86,245.00 tax incl.
BDT 0.00 Tax
BDT 86,245.00 tax excl.
BDT 86,245.00 tax excl.
BDT 0.00 Tax
BDT 86,245.00 tax incl.
More
Last items in stock
In stock: 3
3D Pen 2nd Generation LED Display Screen with (6 Color Filament) Robotics Bangladesh Quick view

Reference: RBD-0815

3D Pen 2nd Generation LED Display Screen with (6 Color Filament)

(0)
Input Voltage: 100-240 V AC. Temp: 160~230 Deg settable. Filament: 1.75 mm PLA or ABS. This 3D Pen is designed for the freehand drawing of 3-Dimensional objects Adjustable output speed, temperature Create projects horizontally or vertically Every 3d pen will be checked and tested on our lab before shipping, so you will not received "intact" package. No...
BDT 2,499.00
BDT 2,499.00 tax incl.
BDT 2,499.00 tax excl.
BDT 2,499.00 tax excl.
BDT 2,499.00 tax incl.
BDT 2,499.00 tax incl.
BDT 0.00 Tax
BDT 2,499.00 tax excl.
BDT 2,499.00 tax excl.
BDT 0.00 Tax
BDT 2,499.00 tax incl.
More
Last items in stock
In stock: 1
ADS1115 16-Bit ADC- 4 Channel with Programmable Gain Amplifier Robotics Bangladesh Quick view

Reference: RBD-0383

ADS1115 16-Bit ADC- 4 Channel with Programmable Gain Amplifier

(0)
Wide Supply Range: 2.0v To 5.5v Low Current Consumption Continuous Mode: Only 150µa Single-shot Auto Shut-down Programmable Data Rate: 8SPS to 860SPS It has Internal low-drift voltage reference
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In-Stock
In stock: 25
PN532 NFC RFID Read / Write Module V3 Kit Robotics Bangladesh Quick view

Reference: RBD-0346

PN532 NFC RFID Read / Write Module V3 Kit

(0)
The PN532 is a highly integrated transmission module for contactless communication at 13.56 MHz including microcontroller functionality based on an 80C51 core with 40 Kbytes of ROM and 1 Kbytes of RAM. The PN532 combines a modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at...
BDT 820.00
BDT 820.00 tax incl.
BDT 820.00 tax excl.
BDT 820.00 tax excl.
BDT 820.00 tax incl.
BDT 820.00 tax incl.
BDT 0.00 Tax
BDT 820.00 tax excl.
BDT 820.00 tax excl.
BDT 0.00 Tax
BDT 820.00 tax incl.
More
In-Stock
In stock: 15
On sale! 5inch HDMI LCD (B) + Bicolor case (Original Waveshare) Quick view

Reference: RBD-0340

Brand: Waveshare

5inch HDMI Touch Screen (B) + Bicolor Case (Original Waveshare)

(0)
Size: 5″ Resolution: 800×480 Display Port: HDMI Resistive touch control. Support backlight control, more power saving. RoboticsBD
BDT 6,300.00
BDT 6,300.00 tax incl.
BDT 6,300.00 tax excl.
BDT 6,300.00 tax excl.
BDT 6,300.00 tax incl.
BDT 6,300.00 tax incl.
BDT 0.00 Tax
BDT 6,300.00 tax excl.
BDT 6,300.00 tax excl.
BDT 0.00 Tax
BDT 6,300.00 tax incl.
More
Last items in stock
In stock: 3
- BDT 155.00 Reduced price 16 Channel 12 bit PWM / Servo Driver I2C interface PCA9685 Robotics Bangladesh Quick view

Reference: RBD-0289

16 Channel 12 bit PWM / Servo Driver I2C interface PCA9685

(0)
Adjustable frequency PWM up to about 1.6 KHz 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate Configurable push-pull or an open-drain output The output enable pin to quickly disable all the outputs Terminal block for power input Reverse polarity protection on the terminal block input Green power-good LED
BDT 525.00 BDT 680.00
BDT 680.00 BDT 525.00 tax incl.
BDT 680.00 BDT 525.00 tax excl.
BDT 680.00 BDT 525.00 tax excl.
BDT 680.00 BDT 525.00 tax incl.
BDT 680.00 BDT 525.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 680.00 BDT 525.00 tax excl.
BDT 680.00 BDT 525.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 680.00 BDT 525.00 tax incl.
More
In-Stock
In stock: 50
Out-of-Stock Creality CR-10 Smart 3D Printer Robotics Bangladesh Quick view

Reference: RBD-1733

Brand: Creality Official

Creality CR-10 Smart 3D Printer

(0)
Built-in WIFI function: Remote control printing anytime, anywhere; A Bit More Intelligence Ultra-silent Design: 32 Bit Mute Board and Mute Fan Design; Intelligent Auto-leveling: V2.0 Auto leveling way, is the same with CR-6 SE. Screen Protection & Auto-shutdown;. Safe and worry-free save energy and power. 6-steps to assemble 8 minutes to complete,...
BDT 72,990.00
BDT 72,990.00 tax incl.
BDT 72,990.00 tax excl.
BDT 72,990.00 tax excl.
BDT 72,990.00 tax incl.
BDT 72,990.00 tax incl.
BDT 0.00 Tax
BDT 72,990.00 tax excl.
BDT 72,990.00 tax excl.
BDT 0.00 Tax
BDT 72,990.00 tax incl.
More
Out-of-Stock
In stock: -1
Out-of-Stock Robotics Arm EEZYbotARM MK1 Robotics Bangladesh Quick view

Reference: RBD-1163

Robotics Arm EEZYbotARM MK1

(0)
The design intent was to make something "easy" to make robotics arm It uses Mini servos for driving the kinematics linkage and you can use Arduino and a decent power supply (2A) to program and drive it. All the pieces are 3DPrinted in PLA.
BDT 6,599.00
BDT 6,599.00 tax incl.
BDT 6,599.00 tax excl.
BDT 6,599.00 tax excl.
BDT 6,599.00 tax incl.
BDT 6,599.00 tax incl.
BDT 0.00 Tax
BDT 6,599.00 tax excl.
BDT 6,599.00 tax excl.
BDT 0.00 Tax
BDT 6,599.00 tax incl.
More
Out-of-Stock
In stock: 0
MCP23017 I2C 16 Input/Output Port Expander Robotics Bangladesh Quick view

Reference: RBD-0385

MCP23017 I2C 16 Input/Output Port Expander

(0)
IC Name: MCP23017 Package/Case: DIP-28
BDT 490.00
BDT 490.00 tax incl.
BDT 490.00 tax excl.
BDT 490.00 tax excl.
BDT 490.00 tax incl.
BDT 490.00 tax incl.
BDT 0.00 Tax
BDT 490.00 tax excl.
BDT 490.00 tax excl.
BDT 0.00 Tax
BDT 490.00 tax incl.
More
In-Stock
In stock: 19
Out-of-Stock 3.5inch RPi LCD (A), 320×480 (Original Waveshare) Quick view

Reference: RBD-0339

Brand: Waveshare

3.5inch Resistive Touch Display (B) for Raspberry Pi

(0)
3.5inch Resistive Touch Display (B) For Raspberry Pi 480×320 IPS Screen SPI Check out New Product 3.5inch HDMI Display-B
BDT 3,900.00
BDT 3,900.00 tax incl.
BDT 3,900.00 tax excl.
BDT 3,900.00 tax excl.
BDT 3,900.00 tax incl.
BDT 3,900.00 tax incl.
BDT 0.00 Tax
BDT 3,900.00 tax excl.
BDT 3,900.00 tax excl.
BDT 0.00 Tax
BDT 3,900.00 tax incl.
More
Out-of-Stock
In stock: 0
RC522 RFID Card Reader Module Kit Android NFC supported Robotics Bangladesh Quick view

Reference: RBD-0313

RC522 RFID Card Reader Module Kit Android NFC supported

(0)
Low power consumption, Low cost, and Compact size Read and write chip Fully integrated at 13.56MHz
BDT 195.00
BDT 195.00 tax incl.
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 195.00 tax incl.
BDT 195.00 tax incl.
BDT 0.00 Tax
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 0.00 Tax
BDT 195.00 tax incl.
More
In-Stock
In stock: 239
32 Channel USB UART Servo Motor Controller Quick view

Reference: RBD-0306

Torobot 32 Channel USB UART Servo Motor Controller

(0)
Baud rate (USB): 115200 Baud rate (bluetooth, UART): 9600 Storage Flash capacity: 16M Mode to choose: 4 types Simultaneous controlling servo number: 32 channel Max action groups: 256 groups Communication agreement: UART Cross platform operation, can support WindowsXP, WindowsVisit, Windows7, Windows8, Windows10, Linux,FreeBsd, MAC OS, Android
BDT 4,400.00
BDT 4,400.00 tax incl.
BDT 4,400.00 tax excl.
BDT 4,400.00 tax excl.
BDT 4,400.00 tax incl.
BDT 4,400.00 tax incl.
BDT 0.00 Tax
BDT 4,400.00 tax excl.
BDT 4,400.00 tax excl.
BDT 0.00 Tax
BDT 4,400.00 tax incl.
More
In-Stock
In stock: 12
PLA Filament for 3D Pen Robotics Bangladesh Quick view

Reference: RBD-1683

PLA Filament for 3D Pen

(0)
Compatible with 3D pen 15gram-17gram 1.75mm Random Color
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 175
Out-of-Stock Creality Ender-3 V2 3D Printer Robotics Bangladesh Quick view

Reference: 1403

Brand: Creality Official

Creality Ender-3 V2 3D Printer

(0)
Replaced with New Version Creality Ender-3 V3 SE 3D Printer. Click Here
BDT 43,950.00
BDT 43,950.00 tax incl.
BDT 43,950.00 tax excl.
BDT 43,950.00 tax excl.
BDT 43,950.00 tax incl.
BDT 43,950.00 tax incl.
BDT 0.00 Tax
BDT 43,950.00 tax excl.
BDT 43,950.00 tax excl.
BDT 0.00 Tax
BDT 43,950.00 tax incl.
More
Out-of-Stock
In stock: 0
HB100 Microwave Sensor 10.525GHz Doppler Radar Motion Detector Arduino  Quick view

Reference: RBD-0411

HB100 Microwave Sensor 10.525GHz Doppler Radar Motion Detector Arduino

(0)
Low current consumption (typical 30 mA) CW or pulse operation Flat profile Long detection range (20 m) Supply voltage: 4.75V to 5.25V X-Band Frequency: 10.525 GHz Minimum Power Output: 13 dBm EIRP. RoboticsBD
BDT 620.00
BDT 620.00 tax incl.
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 620.00 tax incl.
BDT 620.00 tax incl.
BDT 0.00 Tax
BDT 620.00 tax excl.
BDT 620.00 tax excl.
BDT 0.00 Tax
BDT 620.00 tax incl.
More
In-Stock
In stock: 13
L298N H-Bridge Dual Motor Driver, Stepper Motor Driver Quick view

Reference: RBD-0376

L298N H-Bridge Dual Motor Driver, Stepper Motor Driver

(0)
Current Sense for each motor. RoboticsBD Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes
BDT 195.00
BDT 195.00 tax incl.
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 195.00 tax incl.
BDT 195.00 tax incl.
BDT 0.00 Tax
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 0.00 Tax
BDT 195.00 tax incl.
More
In Stock
In stock: 428
MIFARE Classic 1K RFID NFC Smart Card 13. Quick view

Reference: RBD-0351

MIFARE Classic 1K RFID NFC Smart Card 13.56MHz Printable

(0)
Contactless transmission of data and supply energy (no battery needed) Operating distance: Up to 100mm (depending on antenna geometry) RoboticsBD Operating frequency: 13.56MHz Data transfer: 106 kbit/s Data integrity: 16 Bit CRC, parity, bit coding bit counting Anticollision Typical ticketing transaction: <100 ms ( including backup management)...
BDT 35.00
BDT 35.00 tax incl.
BDT 35.00 tax excl.
BDT 35.00 tax excl.
BDT 35.00 tax incl.
BDT 35.00 tax incl.
BDT 0.00 Tax
BDT 35.00 tax excl.
BDT 35.00 tax excl.
BDT 0.00 Tax
BDT 35.00 tax incl.
More
In-Stock
In stock: 3850
Out-of-Stock Graphic LCD 128x64 STN LED Backlight Robotics Bangladesh Quick view

Reference: RBD-0235

Brand: SparkFun Electronics

Graphic LCD 128x64 STN LED Backlight

(0)
Description: This is a framed graphical LCD 64x128 with  LED backlight. This unit is a very clear STN type LCD with  a simple command interface. This new module includes the negative voltage circuitry on board!
BDT 2,300.00
BDT 2,300.00 tax incl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 2,300.00 tax incl.
BDT 2,300.00 tax incl.
BDT 0.00 Tax
BDT 2,300.00 tax excl.
BDT 2,300.00 tax excl.
BDT 0.00 Tax
BDT 2,300.00 tax incl.
More
Out-of-Stock
In stock: 0
Out-of-Stock Creality CR-6 SE Leveling-free DIY 3D Printer Kit Robotics Bangladesh Quick view

Reference: 1404

Brand: Creality Official

Creality CR-6 SE Leveling-free DIY 3D Printer Kit

(0)
Modeling Technology: FDM（Fused Deposition Modeling） File Formats: STL/OBJ/AMF Slicer Software: Creality Slicer/Cura/Reptier-Host/Simplify3D Print Speed: 80-100mm/s Resume Print Function: Yes Printing Size: 235x235x250mm
BDT 49,990.00
BDT 49,990.00 tax incl.
BDT 49,990.00 tax excl.
BDT 49,990.00 tax excl.
BDT 49,990.00 tax incl.
BDT 49,990.00 tax incl.
BDT 0.00 Tax
BDT 49,990.00 tax excl.
BDT 49,990.00 tax excl.
BDT 0.00 Tax
BDT 49,990.00 tax incl.
More
Out-of-Stock
In stock: 0
UART EM4100 RFID Card Reader RDM6300 Robotics Bangladesh Quick view

Reference: RBD-0915

UART EM4100 RFID Card Reader RDM6300

(0)
Maximum effective distance up to 150mm Less than 100ms decoding time Support external antenna Uart interface Support EM4100 compatible read-only or read/write tags Small outline design
BDT 415.00
BDT 415.00 tax incl.
BDT 415.00 tax excl.
BDT 415.00 tax excl.
BDT 415.00 tax incl.
BDT 415.00 tax incl.
BDT 0.00 Tax
BDT 415.00 tax excl.
BDT 415.00 tax excl.
BDT 0.00 Tax
BDT 415.00 tax incl.
More
In-Stock
In stock: 58
MCP2515 CAN Bus Module TJA1050 Receiver SPI Module For Arduino Quick view

Reference: RBD-0397

MCP2515 CAN Bus Module TJA1050 Receiver SPI Module For Arduino

(0)
Support CAN V2.0B technical standard, communication rate 1Mb / S. Module 5V DC power supply, SPI interface protocol control 0 to 8 bytes long data field. 8MHZ crystal oscillator 120Ω terminal resistance Use High-speed CAN transceiver TJA1050 Impedance matching, guaranteed drive capability, long-distance data transmission, prevent signal radiation The...
BDT 410.00
BDT 410.00 tax incl.
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 410.00 tax incl.
BDT 410.00 tax incl.
BDT 0.00 Tax
BDT 410.00 tax excl.
BDT 410.00 tax excl.
BDT 0.00 Tax
BDT 410.00 tax incl.
More
In-Stock
In stock: 29
Monster Moto Shield Dual VNH2SP30 Motor Driver Module 30A Robotics Bangladesh Quick view

Reference: RBD-0377

Monster Moto Shield Dual VNH2SP30 Motor Driver Module 30A

(0)
Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD
BDT 6,650.00
BDT 6,650.00 tax incl.
BDT 6,650.00 tax excl.
BDT 6,650.00 tax excl.
BDT 6,650.00 tax incl.
BDT 6,650.00 tax incl.
BDT 0.00 Tax
BDT 6,650.00 tax excl.
BDT 6,650.00 tax excl.
BDT 0.00 Tax
BDT 6,650.00 tax incl.
More
In-Stock
In stock: 11
Back to top

Follow us on Facebook

Facebook