• Banner

Active filters
  • Categories: Enclosure
  • Categories: Motor Driver
  • Categories: Solenoid/Lock/Actuator

Reference: RBD-0442

DC 12V Solenoid Electric Door Lock

(0)
Holding force: 0.25 kg Energized forms: intermittent Unlocking time: 1s Dimensions: 27 x 29 x 18 mm (LxWxH) High quality ultra-compact electric lock. RoboticsBD
BDT 750.00
BDT 750.00 tax incl.
BDT 750.00 tax excl.
BDT 750.00 tax excl.
BDT 750.00 tax incl.
BDT 750.00 tax incl.
BDT 0.00 Tax
BDT 750.00 tax excl.
BDT 750.00 tax excl.
BDT 0.00 Tax
BDT 750.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-0347

Transparent Acrylic Shell Case for Raspberry Pi 3 Model B/B+

(0)
9 Layer Acrylic stylish case with access to all Ports on Raspberry Pi 3 B/B+ Slot for Cooling Fan Easy to assemble with Nut-Bolts included Slots to route GPIO and CSI ribbon cable Cut-out for micro SC card at the bottom panel. RoboticsBD Note: Cooling fan is not included.
BDT 495.00
BDT 495.00 tax incl.
BDT 495.00 tax excl.
BDT 495.00 tax excl.
BDT 495.00 tax incl.
BDT 495.00 tax incl.
BDT 0.00 Tax
BDT 495.00 tax excl.
BDT 495.00 tax excl.
BDT 0.00 Tax
BDT 495.00 tax incl.
More
In-Stock
In stock: 9

Reference: RBD-0015

Motor Shield L293D

(0)
2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC. Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5%...
BDT 219.00
BDT 219.00 tax incl.
BDT 219.00 tax excl.
BDT 219.00 tax excl.
BDT 219.00 tax incl.
BDT 219.00 tax incl.
BDT 0.00 Tax
BDT 219.00 tax excl.
BDT 219.00 tax excl.
BDT 0.00 Tax
BDT 219.00 tax incl.
More
In-Stock
In stock: 133

Reference: RBD-0906

Raspberry Pi Case with Fan and Heatsink

(0)
Slot for Cooling Fan Easy to assemble with Nut-Bolts included. RoboticsBD Cut-out for micro SC card at the bottom panel This simple case provides tough protection for your raspberry pi along with access to ports High Quality two-piece injection-molded ABS enclosure Click together design, no screws, standoffs or elastic bands required It is easy to use....
BDT 440.00
BDT 440.00 tax incl.
BDT 440.00 tax excl.
BDT 440.00 tax excl.
BDT 440.00 tax incl.
BDT 440.00 tax incl.
BDT 0.00 Tax
BDT 440.00 tax excl.
BDT 440.00 tax excl.
BDT 0.00 Tax
BDT 440.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0432

JF-0530B Pull Push Type Electric Solenoid Electromagnet 10mm 5N DC12V

(0)
Iron Body Material High quality ultra-compact electric lock. RoboticsBD Rustproof, durable, safe, convenient to use. Suction which tightly sucks the iron, thus locking the door. Designed with the open frame type and mount board, high power. Easy to install for the electric door lock or other automatic door lock systems with the mounting board Applicable...
BDT 590.00
BDT 590.00 tax incl.
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 590.00 tax incl.
BDT 590.00 tax incl.
BDT 0.00 Tax
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 0.00 Tax
BDT 590.00 tax incl.
More
In-Stock
In stock: 13

Reference: RBD-0267

Big Easy Driver - Stepper Motor Driver

(0)
Bi-polar Microstepping Driver 2A/Phase Max 1.4-1.7A/Phase w/o Heatsink Max Motor Drive Voltage: 30V On-board 5V/3.3V Regulation Low RDS(ON) outputs Automatic current decay mode detection/selection Mixed and Slow current decay modes Synchronous rectification for low power dissipation Internal UVLO Crossover-current protection 3.3 and 5 V compatible logic...
BDT 1,600.00
BDT 1,600.00 tax incl.
BDT 1,600.00 tax excl.
BDT 1,600.00 tax excl.
BDT 1,600.00 tax incl.
BDT 1,600.00 tax incl.
BDT 0.00 Tax
BDT 1,600.00 tax excl.
BDT 1,600.00 tax excl.
BDT 0.00 Tax
BDT 1,600.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-0920

Ultrasonic Sensor Acrylic Mounting Bracket

(0)
Acrylic Body. Easy to install. compatible with HC-SR04
BDT 80.00
BDT 80.00 tax incl.
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 80.00 tax incl.
BDT 80.00 tax incl.
BDT 0.00 Tax
BDT 80.00 tax excl.
BDT 80.00 tax excl.
BDT 0.00 Tax
BDT 80.00 tax incl.
More
In-Stock
In stock: 100

Reference: RBD-0289

16 Channel 12 bit PWM / Servo Driver I2C interface PCA9685

(0)
Adjustable frequency PWM up to about 1.6 KHz 12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate Configurable push-pull or an open-drain output The output enable pin to quickly disable all the outputs Terminal block for power input Reverse polarity protection on the terminal block input Green power-good LED
BDT 525.00 BDT 680.00
BDT 680.00 BDT 525.00 tax incl.
BDT 680.00 BDT 525.00 tax excl.
BDT 680.00 BDT 525.00 tax excl.
BDT 680.00 BDT 525.00 tax incl.
BDT 680.00 BDT 525.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 680.00 BDT 525.00 tax excl.
BDT 680.00 BDT 525.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 680.00 BDT 525.00 tax incl.
More
In-Stock
In stock: 50

Reference: RBD-0264

Brand: SparkFun Electronics

Lockitron Mechanical Assembly

(0)
Lockitron Mechanical Assembly The Lockitron Mechanical Assembly from SparkFun is a perfect solution for the DIY home automation or Internet of Things (IoT) enthusiast, whether you want to make your life easier by not awkwardly fumbling with keys or add some extra security in your home with three-factor authentication.
BDT 6,000.00
BDT 6,000.00 tax incl.
BDT 6,000.00 tax excl.
BDT 6,000.00 tax excl.
BDT 6,000.00 tax incl.
BDT 6,000.00 tax incl.
BDT 0.00 Tax
BDT 6,000.00 tax excl.
BDT 6,000.00 tax excl.
BDT 0.00 Tax
BDT 6,000.00 tax incl.
More
Last items in stock
In stock: 1

Reference: RBD-0921

2 Axis Pan Tilt Brackets For Camera/Sensors for Servo SG90S MG90S

(0)
PV Nylon Head Two Axial plastic Two axial platform Anti-vibration lightweight Good design and shape Net weight 20g Color : Black Material: Plastic.
BDT 480.00
BDT 480.00 tax incl.
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 480.00 tax incl.
BDT 480.00 tax incl.
BDT 0.00 Tax
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 0.00 Tax
BDT 480.00 tax incl.
More
In-Stock
In stock: 218

Reference: RBD-0306

Torobot 32 Channel USB UART Servo Motor Controller

(0)
Baud rate (USB): 115200 Baud rate (bluetooth, UART): 9600 Storage Flash capacity: 16M Mode to choose: 4 types Simultaneous controlling servo number: 32 channel Max action groups: 256 groups Communication agreement: UART Cross platform operation, can support WindowsXP, WindowsVisit, Windows7, Windows8, Windows10, Linux,FreeBsd, MAC OS, Android
BDT 4,400.00
BDT 4,400.00 tax incl.
BDT 4,400.00 tax excl.
BDT 4,400.00 tax excl.
BDT 4,400.00 tax incl.
BDT 4,400.00 tax incl.
BDT 0.00 Tax
BDT 4,400.00 tax excl.
BDT 4,400.00 tax excl.
BDT 0.00 Tax
BDT 4,400.00 tax incl.
More
In-Stock
In stock: 12

Reference: RBD-0227

JF-0530B Pull Push Type Electric Solenoid Electromagnet 10mm 5N DC6V

(0)
Model: DC 5V 10mm 5N Rated Operating Voltage (VDC): 5 Operation Mode: Push-Pull (Normally Closed) Holding Force (N): 5 Weight:33 gm
BDT 480.00
BDT 480.00 tax incl.
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 480.00 tax incl.
BDT 480.00 tax incl.
BDT 0.00 Tax
BDT 480.00 tax excl.
BDT 480.00 tax excl.
BDT 0.00 Tax
BDT 480.00 tax incl.
More
In-Stock
In stock: 29

Reference: RBD-1327

Clear Acrylic Case For W1209 Digital Temperature Controller

(0)
Package includes: 1 pcs x Acrylic Box ( without W1209 module ) DIY cover for W1209 Control Module   Acrylic material looks transparent(may need to tear down the film).   Easy for electronic enthusiasts to assemble.
BDT 110.00
BDT 110.00 tax incl.
BDT 110.00 tax excl.
BDT 110.00 tax excl.
BDT 110.00 tax incl.
BDT 110.00 tax incl.
BDT 0.00 Tax
BDT 110.00 tax excl.
BDT 110.00 tax excl.
BDT 0.00 Tax
BDT 110.00 tax incl.
More
In-Stock
In stock: 36

Reference: RBD-1043

Solenoid Electric Door Lock DC12V (BIG)

(0)
Holding force: 0.25 kg Energized forms: intermittent Unlocking time: 1s Dimensions: 55 x 23 x 28 mm (LxWxH) High quality ultra-compact electric lock.
BDT 940.00
BDT 940.00 tax incl.
BDT 940.00 tax excl.
BDT 940.00 tax excl.
BDT 940.00 tax incl.
BDT 940.00 tax incl.
BDT 0.00 Tax
BDT 940.00 tax excl.
BDT 940.00 tax excl.
BDT 0.00 Tax
BDT 940.00 tax incl.
More
In-Stock
In stock: 64

Reference: RBD-0376

L298N H-Bridge Dual Motor Driver, Stepper Motor Driver

(0)
Current Sense for each motor. RoboticsBD Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes
BDT 195.00
BDT 195.00 tax incl.
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 195.00 tax incl.
BDT 195.00 tax incl.
BDT 0.00 Tax
BDT 195.00 tax excl.
BDT 195.00 tax excl.
BDT 0.00 Tax
BDT 195.00 tax incl.
More
In Stock
In stock: 428

Reference: RBD-1639

12V DC Long-Stroke Linear Actuator 300mm

(0)
Extends up to 300mm Powerful & Long Stroke Durable Construction Versatile Applications Automatic Control Features
BDT 7,100.00
BDT 7,100.00 tax incl.
BDT 7,100.00 tax excl.
BDT 7,100.00 tax excl.
BDT 7,100.00 tax incl.
BDT 7,100.00 tax incl.
BDT 0.00 Tax
BDT 7,100.00 tax excl.
BDT 7,100.00 tax excl.
BDT 0.00 Tax
BDT 7,100.00 tax incl.
More
In-Stock
In stock: 8

Reference: RBD-1410

Acrylic Case Box with Cooling Fan for NVIDIA Jetson Nano

(0)
Compatible with Nvidia Jetson Nano Easy to assemble Slots to access all ports Cut-out for a fan at the top
BDT 980.00
BDT 980.00 tax incl.
BDT 980.00 tax excl.
BDT 980.00 tax excl.
BDT 980.00 tax incl.
BDT 980.00 tax incl.
BDT 0.00 Tax
BDT 980.00 tax excl.
BDT 980.00 tax excl.
BDT 0.00 Tax
BDT 980.00 tax incl.
More
In-Stock
In stock: 14

Reference: RBD-0377

Monster Moto Shield Dual VNH2SP30 Motor Driver Module 30A

(0)
Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD
BDT 6,650.00
BDT 6,650.00 tax incl.
BDT 6,650.00 tax excl.
BDT 6,650.00 tax excl.
BDT 6,650.00 tax incl.
BDT 6,650.00 tax incl.
BDT 0.00 Tax
BDT 6,650.00 tax excl.
BDT 6,650.00 tax excl.
BDT 0.00 Tax
BDT 6,650.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-1680

Electric Bolt Lock 12V DC

(0)
Electric Bolt Lock 12VDC Ultra-Low Power Design, More Durable and more environmentally friendly. 500,000 times power lock durability High strength aluminum lock body, stainless steel bolt.
BDT 2,980.00
BDT 2,980.00 tax incl.
BDT 2,980.00 tax excl.
BDT 2,980.00 tax excl.
BDT 2,980.00 tax incl.
BDT 2,980.00 tax incl.
BDT 0.00 Tax
BDT 2,980.00 tax excl.
BDT 2,980.00 tax excl.
BDT 0.00 Tax
BDT 2,980.00 tax incl.
More
In-Stock
In stock: 18

Reference: RBD-1413

Brand: Raspberry Pi Official

Raspberry Pi Zero Official Case with GPIO and Camera Hole for Raspberry Pi Zero & Zero W

(0)
Material: ABS- 3 different cover board- Color: White & Red- Use For: Raspberry Pi Zero V1.3 and Raspberry Pi Zero W- Camera Cable Length: 37mm
BDT 330.00
BDT 330.00 tax incl.
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 330.00 tax incl.
BDT 330.00 tax incl.
BDT 0.00 Tax
BDT 330.00 tax excl.
BDT 330.00 tax excl.
BDT 0.00 Tax
BDT 330.00 tax incl.
More
In-Stock
In stock: 15

Reference: RBD-0392

Ardumoto Shield L298P Motor Driver

(0)
L298P based Arduino motor driver shield Forward, Backward steering indicators Can Drive 2 DC Motors Up to 2A of Maximum Current. RoboticsBD
BDT 699.00
BDT 699.00 tax incl.
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 699.00 tax incl.
BDT 699.00 tax incl.
BDT 0.00 Tax
BDT 699.00 tax excl.
BDT 699.00 tax excl.
BDT 0.00 Tax
BDT 699.00 tax incl.
More
In-Stock
In stock: 13

Reference: RBD-2469

Brass Liquid Solenoid Valve - 12V - 1/2 NPS

(0)
Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening, aquarium, or pool project. There are two 1/2" (Nominal NPS) outlets. Normally, the valve is closed. When 12VDC is applied to the two terminals, the valve opens and water can flow. Unlike the plastic solenoid valve, this one does...
BDT 2,650.00 BDT 3,350.00
BDT 3,350.00 BDT 2,650.00 tax incl.
BDT 3,350.00 BDT 2,650.00 tax excl.
BDT 3,350.00 BDT 2,650.00 tax excl.
BDT 3,350.00 BDT 2,650.00 tax incl.
BDT 3,350.00 BDT 2,650.00 tax incl.
BDT 0.00 BDT 0.00 Tax
BDT 3,350.00 BDT 2,650.00 tax excl.
BDT 3,350.00 BDT 2,650.00 tax excl.
BDT 0.00 BDT 0.00 Tax
BDT 3,350.00 BDT 2,650.00 tax incl.
More
In stock
In stock: 5

Reference: RBD-1692

Back to Back 4S AA Battery Holder

(0)
Color: Black lightweight Convenient to carry this battery box holder with wires Weight: About 9g Wire Length: Approx 14cm
BDT 160.00
BDT 160.00 tax incl.
BDT 160.00 tax excl.
BDT 160.00 tax excl.
BDT 160.00 tax incl.
BDT 160.00 tax incl.
BDT 0.00 Tax
BDT 160.00 tax excl.
BDT 160.00 tax excl.
BDT 0.00 Tax
BDT 160.00 tax incl.
More
In-Stock
In stock: 35

Reference: RBD-0434

DRV8825 Stepper Motor Driver Module

(0)
Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm. RoboticsBD
BDT 230.00
BDT 230.00 tax incl.
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 230.00 tax incl.
BDT 230.00 tax incl.
BDT 0.00 Tax
BDT 230.00 tax excl.
BDT 230.00 tax excl.
BDT 0.00 Tax
BDT 230.00 tax incl.
More
Last items in stock
In stock: 2

Reference: RBD-2513

5V Electromagnet - 25 Kg Holding Force - P40/20

(0)
Nominal Voltage: 5V DC Current Draw: 0.6 Amps at 5V Holding Force: 25 Kg / 55 lb Approximate Pickup Weight: 5 KgEver wanted to feel like Magneto? Well, now you sort of can! Bring the ferromagnetic objects in the world under your control with an Electromagnet The simplest way to make an electromagnet is to get a solenoid, pass some current through it, and...
BDT 1,350.00
BDT 1,350.00 tax incl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 1,350.00 tax incl.
BDT 1,350.00 tax incl.
BDT 0.00 Tax
BDT 1,350.00 tax excl.
BDT 1,350.00 tax excl.
BDT 0.00 Tax
BDT 1,350.00 tax incl.
More
In stock
In stock: 7

Reference: RBD-1742

10 X 1.5V AA Back to Back Plastic Battery Holder with Wire

(0)
Holds 10 x AA batteries Easy install, convenient to use. Dimensions mm (LxWxH): 78X 60 X 28 Weight: 27.4 gm Material: Plastic Internal Connection: Series
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 53

Reference: RBD-0435

A4988 StepStick Stepper Motor Driver Module

(0)
Supply Voltage : 8-35 VDC. Current : 1.0A  (no heatsink ). Current : 2.0A (with heat-sinking). logic input : 3 – 5.5V . Automatic current decay mode detection / choice. Mixed with slow current decay mode.
BDT 180.00
BDT 180.00 tax incl.
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 180.00 tax incl.
BDT 180.00 tax incl.
BDT 0.00 Tax
BDT 180.00 tax excl.
BDT 180.00 tax excl.
BDT 0.00 Tax
BDT 180.00 tax incl.
More
In-Stock
In stock: 65

Reference: RBD-2514

5V Electromagnet - 10 Kg Holding Force - P30/22

(0)
Nominal Voltage: 5V DC Current Draw: 0.6 Amps at 5V Holding Force: 10 Kg / 22 lb Approximate Pickup Weight: 2 Kg / 4 lbEver wanted to feel like Magneto? Well, now you sort of can! Bring the ferromagnetic objects in the world under your control with an Electromagnet The simplest way to make an electromagnet is to get a solenoid, pass some current through...
BDT 1,020.00
BDT 1,020.00 tax incl.
BDT 1,020.00 tax excl.
BDT 1,020.00 tax excl.
BDT 1,020.00 tax incl.
BDT 1,020.00 tax incl.
BDT 0.00 Tax
BDT 1,020.00 tax excl.
BDT 1,020.00 tax excl.
BDT 0.00 Tax
BDT 1,020.00 tax incl.
More
In stock
In stock: 9

Reference: RBD-1743

6 x AA Battery Holder Box (Back-to-Back)

(0)
Holds 6 x AA batteries Easy install, convenient to use. Dimensions mm (LxWxH): 58X 48 X 28 Weight: 15.6 gm Material: Plastic Internal Connection: Series
BDT 150.00
BDT 150.00 tax incl.
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 150.00 tax incl.
BDT 150.00 tax incl.
BDT 0.00 Tax
BDT 150.00 tax excl.
BDT 150.00 tax excl.
BDT 0.00 Tax
BDT 150.00 tax incl.
More
In-Stock
In stock: 30

Reference: RBD-0557

30A Mini VNH2SP30 Stepper Motor Driver Monster Moto Module For Arduino

(0)
Voltage Max: 16V Maximum current rating: 30 A Practical Continuous Current: 14 A Current sensing available to Arduino analog pin MOSFET on-resistance: 19 mΩ (per leg) Maximum PWM frequency: 20 kHz Thermal Shutdown Undervoltage and Overvoltage shutdown. RoboticsBD
BDT 2,750.00
BDT 2,750.00 tax incl.
BDT 2,750.00 tax excl.
BDT 2,750.00 tax excl.
BDT 2,750.00 tax incl.
BDT 2,750.00 tax incl.
BDT 0.00 Tax
BDT 2,750.00 tax excl.
BDT 2,750.00 tax excl.
BDT 0.00 Tax
BDT 2,750.00 tax incl.
More
In-Stock
In stock: 4

Reference: RBD-2515

5V Electromagnet - 5 Kg Holding Force - P25/20

(0)
Nominal Voltage: 5V DC Current Draw: 0.6 Amps at 5V Holding Force: 5 Kg / 11 lb Approximate Pickup Weight: 1 Kg / 2 lbEver wanted to feel like Magneto? Well, now you sort of can! Bring the ferromagnetic objects in the world under your control with an Electromagnet The simplest way to make an electromagnet is to get a solenoid, pass some current through...
BDT 890.00
BDT 890.00 tax incl.
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 890.00 tax incl.
BDT 890.00 tax incl.
BDT 0.00 Tax
BDT 890.00 tax excl.
BDT 890.00 tax excl.
BDT 0.00 Tax
BDT 890.00 tax incl.
More
In stock
In stock: 10

Reference: RBD-1828

Argon ONE M.2 Case for Raspberry Pi 4

(0)
Sleek aluminum alloy enclosure Plastic base for excellent Wi-Fi signal strength Easy installation with magnetic removable top Easily accessible GPIO with color-coded pinouts M.2 SATA SSD NOT INCLUDED
BDT 6,990.00
BDT 6,990.00 tax incl.
BDT 6,990.00 tax excl.
BDT 6,990.00 tax excl.
BDT 6,990.00 tax incl.
BDT 6,990.00 tax incl.
BDT 0.00 Tax
BDT 6,990.00 tax excl.
BDT 6,990.00 tax excl.
BDT 0.00 Tax
BDT 6,990.00 tax incl.
More
Out-of-Stock
In stock: -7

Follow us on Facebook