• Banner

Current to Voltage Transmitter Module Robotics Bangladesh
  • Current to Voltage Transmitter Module Robotics Bangladesh
  • Current to Voltage Transmitter Module Robotics Bangladesh

Current to Voltage Transmitter Module

RBD-1344

  • Supply voltage range: DC 7 V ~ 35 V
  • Output voltage signal: 0 ~ 2.5 v, 3.3 v, 5 v, 10 v, 15 V.
  • 4-20mA to 0-15V,0-5V,0-10V
BDT 590.00
BDT 590.00 BDT 590.00 BDT 590.00 BDT 590.00
Tax included Tax excluded Tax included Tax excluded
BDT 590.00 Tax excluded
BDT 590.00 Tax included
BDT 0.00 Tax
BDT 590.00 Tax excluded
BDT 0.00 Tax
BDT 590.00 Tax included
Quantity
In-Stock
38 Items

  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

Description

In instrumentation systems, measurement of the use of streaming methods for the transmission of sensor information is common. The flow system, due to the fact that in the whole path of the signal, constant flow, has no losses and is more accurate. For this reason, most industrial devices, especially PLCs, use a current system. But working with a voltage system is still common in many sensors and devices. In order to communicate between current and voltage systems, you need to have a current converter to the voltage. Featured By RoboticsBD.

Product Images are shown for illustrative purposes only and may differ from the actual product.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Features:

  1. The module is wired according to the definition, the power supply voltage is 7-36V (if the output is to 10V, the supply voltage must be greater than 12V)
  2. After power-on, the D2 light should be on, otherwise check the line connection. The board is reversely protected, and the reverse is not burned. 
  3. When the current input is at the minimum value (0mA or 4mA), adjust the zero potentiometer to make the VOUT output the minimum value (0.0V or other voltage).  RoboticsBD
  4. When the current input is at the maximum value (20mA), adjust the range potentiometer to make the VOUT output the maximum value (3.3V or 5V or 10V, when the input is 4~20ma, the output can be as small as 2.5V)

According to the demand, select the corresponding range through the jumper cap:

4 to 20 mA:

  • 0~2.5V range: J1 1, 2 feet open, 3, 4 feet short circuit
  • 0~3.3V range: J1 1, 2 feet disconnected, 3, 4 feet disconnected
  • 0~5.0V range: J1 1, 2 feet Short circuit, 3, 4 pin short circuit
  • 0~10.0V range: J1 1, 2 pin short circuit, 3, 4 pin disconnect

0 to 20 mA:

  • 0~3.3V range: J1 1, 2 feet are disconnected, 3, 4 feet are disconnected
  • 0~5.0V range: J1 1, 2 pin short circuit, 3, 4 pin short circuit
  • 0~10.0V range: J1 1, 2 pin short circuit , 3, 4 feet disconnected

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

General Specification
Current Rating 0/4~20mA
DC Rating 0~3.3/5/10V
Input current: 0 or 4mA~20mA
Voltage output: 0~3.3V / 5V /10V
Size: 42 (L) x 25.2 (W) mm
Shipment Weight 0.010 kg
Shipment Dimensions 3.5 × 2.5 × 2.5 cm

Please allow 5% measuring deviation due to manual measurement.

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Package Includes:

1 x Current to Voltage 4-20mA to 0-15V 0-5v/0-10V Isolation Transmitter Signal Converter dc 12v 24v

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD RoboticsBD 

Product Details
RBD-1344
38 Items

Specific References

EAN13
1344
Comments (0)
Grade
No customer reviews for the moment.
16 other products in the same category:

Reference: RBD-1835

Non-invasive AC current Sensor Split Core Current Transformer SCT-013-050 50A

(0)
Input current (RMS): 50A. Work temperature: -25℃~+70℃. Storage temperature: -30℃~+90℃. Work voltage: 660V. Frequency range: 50Hz-1KHz.
BDT 780.00
BDT 780.00 tax incl.
BDT 780.00 tax excl.
BDT 780.00 tax excl.
BDT 780.00 tax incl.
BDT 780.00 tax incl.
BDT 0.00 Tax
BDT 780.00 tax excl.
BDT 780.00 tax excl.
BDT 0.00 Tax
BDT 780.00 tax incl.
More
In-Stock
In stock: 29

Reference: RBD-2675

Voltage Detection Sensor Module 25V

(0)
You can also use the IICLCD1602 LCD to display voltage. By 3P connector, connect this module with the expansion of board Arduino Voltage input range: DC 0-25 V Voltage detection range: DC 0.02445 V  to 25 V Voltage analog resolution : 0.00489 V
BDT 75.00
BDT 75.00 tax incl.
BDT 75.00 tax excl.
BDT 75.00 tax excl.
BDT 75.00 tax incl.
BDT 75.00 tax incl.
BDT 0.00 Tax
BDT 75.00 tax excl.
BDT 75.00 tax excl.
BDT 0.00 Tax
BDT 75.00 tax incl.
More
In stock
In stock: 79

Reference: RBD-0564

AC 0~5A Analog Current Meter Module Ammeter Sensor Board for Arduino

(0)
Onboard precision microcurrent transformer. Onboard sampling resistor. The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA. Rated input current: 5A Rated output current: 5mA Change: 1000: 1 The linear range: 0 ~ 10A (100 ohms) Linearity: 0.2%
BDT 455.00
BDT 455.00 tax incl.
BDT 455.00 tax excl.
BDT 455.00 tax excl.
BDT 455.00 tax incl.
BDT 455.00 tax incl.
BDT 0.00 Tax
BDT 455.00 tax excl.
BDT 455.00 tax excl.
BDT 0.00 Tax
BDT 455.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-1424

ZMCT103C 5A Range Single Phase AC Micro Current Transformer Sensor

(0)
Onboard precision microcurrent transformer. Onboard sampling resistor. The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA. Rated input current: 5A Rated output current: 5mA Change: 1000: 1 The linear range: 0 ~ 10A (100 ohms) Linearity: 0.2%
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In-Stock
In stock: 54

Reference: RBD-0555

Current Sensor ACS712-30A

(0)
Low-noise analog signal path Device bandwidth is set via the new FILTER pin 5 µs output rise time in response to step input current Small footprint, low-profile SOIC8 package 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8 Supply Voltage: 4.5V~5.5V DC Measure Current Range: 30A Sensitivity: 100mV/A
BDT 219.00
BDT 219.00 tax incl.
BDT 219.00 tax excl.
BDT 219.00 tax excl.
BDT 219.00 tax incl.
BDT 219.00 tax incl.
BDT 0.00 Tax
BDT 219.00 tax excl.
BDT 219.00 tax excl.
BDT 0.00 Tax
BDT 219.00 tax incl.
More
In-Stock
In stock: 39

Reference: RBD-1836

Non-invasive AC current Sensor Split Core Current Transformer SCT-013-000 30A

(0)
Input Current : 0-30A Output Mode: 0-1V @ 30mA Frequency: 50HZ-150KHZ Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W) Output Plug 3.5mm Dielectric Strength 6000V AC/1min Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement, and protection Meet UL94-V0 flame retardant properties
BDT 780.00
BDT 780.00 tax incl.
BDT 780.00 tax excl.
BDT 780.00 tax excl.
BDT 780.00 tax incl.
BDT 780.00 tax incl.
BDT 0.00 Tax
BDT 780.00 tax excl.
BDT 780.00 tax excl.
BDT 0.00 Tax
BDT 780.00 tax incl.
More
In-Stock
In stock: 10

Reference: RBD-2071

SS49E Linear Hall Effect Sensor Module

(0)
Type: Magnetic Sensor Module Mainly Compatible with: Ardunio
BDT 50.00
BDT 50.00 tax incl.
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 50.00 tax incl.
BDT 50.00 tax incl.
BDT 0.00 Tax
BDT 50.00 tax excl.
BDT 50.00 tax excl.
BDT 0.00 Tax
BDT 50.00 tax incl.
More
In-Stock
In stock: 54

Reference: RBD-0562

DC 3v-6v to 400kV 400000V Boost Step-up Power Module High-voltage Generator

(0)
Input Voltage: DC3.6V-6V Input Current: 2A-5A Output Voltage: DC 400KV (Please pay attention to safety when used) Input Line Length: about 100mm (red is positive) Output Line Length: about 160mm
BDT 650.00
BDT 650.00 tax incl.
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 650.00 tax incl.
BDT 650.00 tax incl.
BDT 0.00 Tax
BDT 650.00 tax excl.
BDT 650.00 tax excl.
BDT 0.00 Tax
BDT 650.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-2072

Linear Magnetic Hall sensor

(0)
Operating Voltage: 3.3V-5V Features wide range voltage comparator LM393 Adjustable sensitivity Signal output indicator with the retaining bolt hole, convenient installation Output form digital switch output (0 and 1 high and low level) The output effective signal is low level When there is sound, outputs low level and the signal light
BDT 65.00
BDT 65.00 tax incl.
BDT 65.00 tax excl.
BDT 65.00 tax excl.
BDT 65.00 tax incl.
BDT 65.00 tax incl.
BDT 0.00 Tax
BDT 65.00 tax excl.
BDT 65.00 tax excl.
BDT 0.00 Tax
BDT 65.00 tax incl.
More
In-Stock
In stock: 150

Reference: RBD-1174

Current Sensor ACS712-5A

(0)
Low-noise analog signal path. Device bandwidth is set via the new FILTER pin. 5 µs output rise time in response to step input current. Small footprint, low-profile SOIC8 package. 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
BDT 184.00
BDT 184.00 tax incl.
BDT 184.00 tax excl.
BDT 184.00 tax excl.
BDT 184.00 tax incl.
BDT 184.00 tax incl.
BDT 0.00 Tax
BDT 184.00 tax excl.
BDT 184.00 tax excl.
BDT 0.00 Tax
BDT 184.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-1675

PZEM-004T V3.0 AC Digital Multifunction Meter Watt Power Volt Amp With Coil 100A

(0)
Model: PZEM-004T Operating Voltage: 80-260VAC Test Voltage: 80-260VAC Rated Current: 100A Rated power: 100A / 22000W Operating frequency: 45-65Hz Measurement accuracy: 1.0
BDT 3,499.00
BDT 3,499.00 tax incl.
BDT 3,499.00 tax excl.
BDT 3,499.00 tax excl.
BDT 3,499.00 tax incl.
BDT 3,499.00 tax incl.
BDT 0.00 Tax
BDT 3,499.00 tax excl.
BDT 3,499.00 tax excl.
BDT 0.00 Tax
BDT 3,499.00 tax incl.
More
In-Stock
In stock: 17

Reference: RBD-0559

Voltage to Current Transmitter Signal Module

(0)
Power supply: DC 7-30 V Input Voltage: 0-10V Output current: 4-20mA  0-5V to 4-20mA Linear Conversion
BDT 880.00
BDT 880.00 tax incl.
BDT 880.00 tax excl.
BDT 880.00 tax excl.
BDT 880.00 tax incl.
BDT 880.00 tax incl.
BDT 0.00 Tax
BDT 880.00 tax excl.
BDT 880.00 tax excl.
BDT 0.00 Tax
BDT 880.00 tax incl.
More
In-Stock
In stock: 101

Reference: RBD-2342

I2C SMBUS INA3221 Triple-Channel Shunt Current Power Supply Voltage Monitor Sensor Board

(0)
INA3221 3 Channel Shunt Current Voltage Monitor Sensor, high-side current and bus voltage monitor with an I2C- and SMBUS-compatible interface
BDT 350.00
BDT 350.00 tax incl.
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 350.00 tax incl.
BDT 350.00 tax incl.
BDT 0.00 Tax
BDT 350.00 tax excl.
BDT 350.00 tax excl.
BDT 0.00 Tax
BDT 350.00 tax incl.
More
In stock
In stock: 38

Reference: RBD-2735

INA219 DC Current Measurement Module

(0)
Measures high-side current and voltage up to 3.2A @ 26VDC.
BDT 250.00
BDT 250.00 tax incl.
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 250.00 tax incl.
BDT 250.00 tax incl.
BDT 0.00 Tax
BDT 250.00 tax excl.
BDT 250.00 tax excl.
BDT 0.00 Tax
BDT 250.00 tax incl.
More
In stock
In stock: 30

Reference: RBD-2653

2.8V-5.5V to ±12V DC Conversion Step Up Power Supply Module

(0)
2.8V-5.5V to ±12V DC Conversion Step Up Power Supply  Module is straightforward. There is a 2.8 to 5.5 V DC input and the module outputs +12 V and -12 V DC dual power supply voltage with a current rating of a maximum 30 mA. Off course the current output is low but sometimes it suits in many situations where one is looking forward for a small boost...
BDT 120.00
BDT 120.00 tax incl.
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 120.00 tax incl.
BDT 120.00 tax incl.
BDT 0.00 Tax
BDT 120.00 tax excl.
BDT 120.00 tax excl.
BDT 0.00 Tax
BDT 120.00 tax incl.
More
In stock
In stock: 49

Reference: RBD-1177

4-20mA Signal Generator Current Loop Simulator Tester

(0)
This signal generator can use 4-20mA to generate voltage and control the current in the circuit. Accuracy up to 0.01; Liquid crystal display; Rotary encoder adjustment ; Two connection terminals are non polarity. Output range can be set; 4-20mA (device control) / -21mA (signal debugging) Display mode can be set, it is convenient for you to see the value...
BDT 2,999.00
BDT 2,999.00 tax incl.
BDT 2,999.00 tax excl.
BDT 2,999.00 tax excl.
BDT 2,999.00 tax incl.
BDT 2,999.00 tax incl.
BDT 0.00 Tax
BDT 2,999.00 tax excl.
BDT 2,999.00 tax excl.
BDT 0.00 Tax
BDT 2,999.00 tax incl.
More
In-Stock
In stock: 14
You might also like

Reference: RBD-0559

Voltage to Current Transmitter Signal Module

(0)
Power supply: DC 7-30 V Input Voltage: 0-10V Output current: 4-20mA  0-5V to 4-20mA Linear Conversion
BDT 880.00
BDT 880.00 tax incl.
BDT 880.00 tax excl.
BDT 880.00 tax excl.
BDT 880.00 tax incl.
BDT 880.00 tax incl.
BDT 0.00 Tax
BDT 880.00 tax excl.
BDT 880.00 tax excl.
BDT 0.00 Tax
BDT 880.00 tax incl.
More
In-Stock
In stock: 101

Reference: RBD-0564

AC 0~5A Analog Current Meter Module Ammeter Sensor Board for Arduino

(0)
Onboard precision microcurrent transformer. Onboard sampling resistor. The module can measure AC currents less than 5A, the corresponding analog output 5A/5mA. Rated input current: 5A Rated output current: 5mA Change: 1000: 1 The linear range: 0 ~ 10A (100 ohms) Linearity: 0.2%
BDT 455.00
BDT 455.00 tax incl.
BDT 455.00 tax excl.
BDT 455.00 tax excl.
BDT 455.00 tax incl.
BDT 455.00 tax incl.
BDT 0.00 Tax
BDT 455.00 tax excl.
BDT 455.00 tax excl.
BDT 0.00 Tax
BDT 455.00 tax incl.
More
In-Stock
In stock: 16

Reference: RBD-0692

4-20MA -50~150℃ RTD PT1000 SBW Temperature Sensor Transmitter Module

(0)
Accuracy: +/- 0.2F.S Temperature coefficient: Less than 150ppm/K F.S. Working temperature: 0-100℃ Working humidity: Less than 98% RH
BDT 1,500.00
BDT 1,500.00 tax incl.
BDT 1,500.00 tax excl.
BDT 1,500.00 tax excl.
BDT 1,500.00 tax incl.
BDT 1,500.00 tax incl.
BDT 0.00 Tax
BDT 1,500.00 tax excl.
BDT 1,500.00 tax excl.
BDT 0.00 Tax
BDT 1,500.00 tax incl.
More
Out-of-Stock
In stock: 0

Reference: RBD-1173

Non-invasive AC current Sensor Split Core Current Transformer SCT-013-000 100A

(0)
Input Current : 100A Frequency: 50HZ-150KHZ Opening Size: 13 x 13mm/ 0.5″ x 0.5″(L*W) Output Plug 3.5mm Dielectric Strength 6000V AC/1min Meet UL94-V0 flame retardant properties
BDT 780.00
BDT 780.00 tax incl.
BDT 780.00 tax excl.
BDT 780.00 tax excl.
BDT 780.00 tax incl.
BDT 780.00 tax incl.
BDT 0.00 Tax
BDT 780.00 tax excl.
BDT 780.00 tax excl.
BDT 0.00 Tax
BDT 780.00 tax incl.
More
In-Stock
In stock: 12

Reference: RBD-1174

Current Sensor ACS712-5A

(0)
Low-noise analog signal path. Device bandwidth is set via the new FILTER pin. 5 µs output rise time in response to step input current. Small footprint, low-profile SOIC8 package. 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
BDT 184.00
BDT 184.00 tax incl.
BDT 184.00 tax excl.
BDT 184.00 tax excl.
BDT 184.00 tax incl.
BDT 184.00 tax incl.
BDT 0.00 Tax
BDT 184.00 tax excl.
BDT 184.00 tax excl.
BDT 0.00 Tax
BDT 184.00 tax incl.
More
In-Stock
In stock: 5

Reference: RBD-1175

Current Sensor ACS712-20A

(0)
Low-noise analog signal path Device bandwidth is set via the new FILTER pin 5 µs output rise time in response to step input current Small footprint, low-profile SOIC8 package 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8 Supply Voltage: 4.5V~5.5V DC Measure Current Range: 20A Sensitivity: 100mV/A
BDT 199.00
BDT 199.00 tax incl.
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 199.00 tax incl.
BDT 199.00 tax incl.
BDT 0.00 Tax
BDT 199.00 tax excl.
BDT 199.00 tax excl.
BDT 0.00 Tax
BDT 199.00 tax incl.
More
In-Stock
In stock: 36

Reference: RBD-1177

4-20mA Signal Generator Current Loop Simulator Tester

(0)
This signal generator can use 4-20mA to generate voltage and control the current in the circuit. Accuracy up to 0.01; Liquid crystal display; Rotary encoder adjustment ; Two connection terminals are non polarity. Output range can be set; 4-20mA (device control) / -21mA (signal debugging) Display mode can be set, it is convenient for you to see the value...
BDT 2,999.00
BDT 2,999.00 tax incl.
BDT 2,999.00 tax excl.
BDT 2,999.00 tax excl.
BDT 2,999.00 tax incl.
BDT 2,999.00 tax incl.
BDT 0.00 Tax
BDT 2,999.00 tax excl.
BDT 2,999.00 tax excl.
BDT 0.00 Tax
BDT 2,999.00 tax incl.
More
In-Stock
In stock: 14

Reference: RBD-1344

Current to Voltage Transmitter Module

(0)
Supply voltage range: DC 7 V ~ 35 V Output voltage signal: 0 ~ 2.5 v, 3.3 v, 5 v, 10 v, 15 V. 4-20mA to 0-15V,0-5V,0-10V
BDT 590.00
BDT 590.00 tax incl.
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 590.00 tax incl.
BDT 590.00 tax incl.
BDT 0.00 Tax
BDT 590.00 tax excl.
BDT 590.00 tax excl.
BDT 0.00 Tax
BDT 590.00 tax incl.
More
In-Stock
In stock: 38

Reference: RBD-1561

RTD PT100 Temperature Sensor Transmitter 4-20mA Output

(0)
4-20mA -50 - 150C WEIGHT: 350.00g DIMENSIONS: 4.00cm x 4.00cm x 1.50cm
BDT 1,990.00
BDT 1,990.00 tax incl.
BDT 1,990.00 tax excl.
BDT 1,990.00 tax excl.
BDT 1,990.00 tax incl.
BDT 1,990.00 tax incl.
BDT 0.00 Tax
BDT 1,990.00 tax excl.
BDT 1,990.00 tax excl.
BDT 0.00 Tax
BDT 1,990.00 tax incl.
More
In-Stock
In stock: 11

Reference: RBD-1739

PT100 Temperature Transmitter 0-200 Celsius Range 4-20MA DC 24V

(0)
PT100 Temperature Transmitter 0-200 Celsius Range 4-20MA DC 24V
BDT 1,990.00
BDT 1,990.00 tax incl.
BDT 1,990.00 tax excl.
BDT 1,990.00 tax excl.
BDT 1,990.00 tax incl.
BDT 1,990.00 tax incl.
BDT 0.00 Tax
BDT 1,990.00 tax excl.
BDT 1,990.00 tax excl.
BDT 0.00 Tax
BDT 1,990.00 tax incl.
More
In-Stock
In stock: 36

Reference: RBD-1823

Digital 4-20mA 0-10V Voltage Signal Generator 0-20mA Current Transmitter Loop Simulator

(0)
Power Supply: external micro USB-5V. Voltage Output: 0-12V. Current Output: 0-22mA. Multiple Display: just push the small button to switch the display mode
BDT 8,890.00
BDT 8,890.00 tax incl.
BDT 8,890.00 tax excl.
BDT 8,890.00 tax excl.
BDT 8,890.00 tax incl.
BDT 8,890.00 tax incl.
BDT 0.00 Tax
BDT 8,890.00 tax excl.
BDT 8,890.00 tax excl.
BDT 0.00 Tax
BDT 8,890.00 tax incl.
More
In-Stock
In stock: 4

Follow us on Facebook