8-channel 10-bit Analog to Digital Converter (ADC) IC Compatible with Raspberry Pi and other microcontrollers via SPI Converts analog sensor signals to digital data with high accuracy Breadboard-friendly DIP package for easy prototyping Ideal for sensors like LM35, LDR, potentiometer, and thermistors Requires only 4 pins for communication, with Python...

IC Name: LF356N/NOPB Package/Case: DIP-8

Wide supply voltage ranges Low supply-current drain independent of supply voltage Common-mode input voltage range includes ground, allowing direct sensing near ground Low input bias and offset parameters Internal frequency compensation

Versatile 8-input NAND/AND gate IC, configurable for multiple logic functions. Low power consumption and high noise immunity thanks to CMOS technology. Wide operating voltage range from 3V to 15V for flexible circuit designs. Standard 14-pin DIP package, ideal for through-hole mounting. Suitable for digital circuits, counters, sequencers, and more.

MCP2562 CAN Bus Transceiver for high-speed ISO 11898-2 compliant CAN communication Supports data rates up to 1 Mb/s for reliable real-time networking Low EMI and high noise immunity for industrial and automotive use Built-in standby mode for reduced power consumption Integrated thermal shutdown and short-circuit protection Compatible with Arduino, STM32,...

MCP23S17 16-Bit I/O Expander SPI for expanding microcontroller GPIO pins Adds 16 programmable digital I/O via high-speed SPI (up to 10 MHz) Wide operating voltage range: 1.8V – 5.5V Per-pin interrupt support with interrupt-on-change detection Configurable internal pull-up resistors for input stability Ideal for Arduino, ESP32, STM32, Raspberry Pi, and...

MCP3008-I/P 8-Channel 10-Bit ADC for precise analog signal conversion Supports 8 single-ended or 4 differential inputs in one compact IC SPI interface compatible with Arduino, Raspberry Pi, ESP32 & more Wide operating voltage range 2.7V – 5.5V for flexible integration Industrial temperature grade -40°C to +85°C Ideal for sensor interfacing, robotics,...

74HCT245 Bus Transceiver for high-speed 8-bit bidirectional data communication Integrated 3-State outputs for safe shared bus operation TTL-compatible HCT CMOS logic for reliable microcontroller interfacing Direction (DIR) control for flexible data flow management Output Enable (OE) pin for complete bus isolation Ideal for memory systems, embedded...

74HCT125 Quad Buffer IC with four independent non-inverting buffers Integrated 3-State outputs (High / Low / High-Z) for shared bus systems TTL-compatible HCT CMOS logic for easy microcontroller interfacing Individual Output Enable control for each channel Operates at standard 5V logic systems (4.5V – 5.5V) Ideal for signal buffering, isolation, and...

TL082 Dual Op-Amp with high input impedance JFET inputs Integrated two independent operational amplifiers in one IC Wide supply range ±5V to ±18V (10–36V total) Fast slew rate (~13 V/µs) and ~3 MHz bandwidth Low noise performance for audio and signal processing Ideal for filters, amplifiers, sensor conditioning & analog circuits

ULN2003A 7-Channel Darlington Driver IC for high-current load control Drives relays, stepper motors, solenoids, and LED arrays Supports up to 50V output voltage and 500mA per channel Built-in flyback diodes for inductive load protection TTL/CMOS compatible inputs for easy MCU interfacing Ideal for robotics, automation, and embedded systems

ULN2803A 8-Channel Darlington Driver IC for high-current load control Drives relays, stepper motors, solenoids, and LED arrays Supports up to 50V output voltage and 500mA per channel Built-in flyback diodes for safe inductive load protection TTL/CMOS compatible inputs for direct microcontroller interfacing Ideal for robotics, automation, and industrial...

TPIC6B595 High Power Shift Register with 8-bit serial-in parallel-out control Open-drain DMOS power outputs for direct load driving Handles up to 50V output voltage and ~150mA per channel Built-in clamp protection for inductive loads Cascade multiple ICs for unlimited output expansion Ideal for LEDs, relays, solenoids, and automation systems

MIC2981 8-Channel Source Driver Array for high-side load control Provides positive voltage switching (source driver) Supports up to ~50V output voltage Delivers up to ~350mA per channel Built-in clamp diodes for inductive load protection Ideal for relays, solenoids, LEDs, and automation systems

MC34152 Dual MOSFET Driver with 1.5A peak output per channel Dual non-inverting gate drivers for power MOSFET control Fast switching speed (~15 ns rise/fall time) Wide supply range (~6.1V to 18V) CMOS / TTL compatible logic inputs Ideal for SMPS, DC-DC converters & motor control circuits

Quad 2-input OR gate IC based on CMOS 4000 series logic Operates on a wide voltage range: 3V to 18V for versatile applications Features 4 logic gates with low power consumption (15 μA typical) PDIP-14 through-hole package for easy prototyping and breadboard use High-speed operation with 60 ns typical propagation delay Manufactured by Texas Instruments;...

The 74×14 (ex 74HC14) is a common logic IC with six Schmitt-trigger inverters. I love this chip because you can do a lot of cool stuff with it (oscillators, sound, blinking, etc).

Dual D-type flip-flop with preset and clear functions Operates with standard 5V TTL logic compatibility Provides edge-triggered data storage and synchronization Ideal for counters, registers, and timing circuits Compact 14-pin DIP package for easy breadboard use Reliable performance for digital electronics projects

Single JFET-input operational amplifier for precision analog applications High input impedance and low input bias current ensure accurate performance Features low noise and wide slew rate for clean signal amplification Ideal for audio preamplifiers, filters, and instrumentation circuits Operates from a wide supply voltage range for flexible design use...

Dual JK flip-flop with asynchronous preset and clear inputs TTL-compatible logic for seamless integration with standard circuits Ideal for counters, frequency dividers, and control logic applications Provides high-speed performance in sequential circuit design Edge-triggered design ensures precise and stable operation Compact 14-pin DIP package for easy...

4-bit transparent latch for temporary data storage and buffering Features active-low enable control for synchronization between systems Ideal for digital data holding, display driving, and memory interfacing TTL-compatible design ensures reliable integration with standard logic circuits Compact 16-pin DIP package suitable for breadboard and PCB mounting...

BCD decade counter counts from 0 to 9 and auto-resets Includes built-in divide-by-2 and divide-by-5 counter sections TTL-compatible logic ensures stable high-speed operation Ideal for digital clocks, frequency dividers, and timer circuits Can be cascaded for multi-digit counting applications Compact 14-pin DIP package for easy prototyping and circuit...

High-speed 4-bit synchronous binary counter with parallel load Includes asynchronous clear for quick reset functionality TTL-compatible for stable and reliable operation Ideal for timing, sequencing, and digital counting applications Can be cascaded for extended counting beyond 4 bits Compact 16-pin DIP package for easy prototyping and integration

8-bit serial-in, parallel-out (SIPO) shift register for data conversion Converts serial data streams into parallel output form efficiently TTL-compatible design for seamless integration with logic circuits Ideal for LED displays, data storage, and serial-to-parallel interfaces Supports cascading for extended data width applications Compact 14-pin DIP...

3-to-8 line decoder/demultiplexer with active-low outputs Converts 3 binary inputs into 8 unique output lines TTL-compatible for seamless integration in logic systems Ideal for memory addressing, display selection, and control logic High fan-out capability for driving multiple loads Compact 16-pin DIP package suitable for prototyping and circuit design

Dual 2-to-4 line decoder/demultiplexer with independent operation Provides active-low outputs for logic decoding and control applications TTL-compatible for reliable high-speed digital integration Ideal for address decoding, signal routing, and logic expansion Operates from a standard 5V DC supply Compact 16-pin DIP package suitable for breadboard and PCB...

Dual 4-to-1 multiplexer for efficient digital data selection Two independent multiplexers share common select lines TTL-compatible for stable and reliable logic operations Ideal for signal routing, data selection, and logic function generation Fast switching performance for high-speed digital circuits Standard 16-pin DIP package suitable for breadboard...

Octal buffer/line driver with tri-state output control Provides eight high-current channels for data line driving TTL-compatible for reliable logic-level operation Ideal for bus interfacing, data buffering, and signal isolation Features symmetrical drive capability for balanced performance Standard 20-pin DIP package suitable for breadboard and PCB...